Where Is The CR80 Cleaning Card Used?

Posted on November 19, 2022May 5, 2023 by Adminsoft

What is a CR80 cleaning card? How does a cleaning card cleaning affect you? These series of questions are bothering friends who know about the CR80 cleaning card. Yousite is to tell you so that you can fully understand what is cleaning card.

Where can the CR80 cleaning card be used?

The cleaning card cleans the read head and the entire track of a magnetic stripe reader in one pass. The card can be used in the insert, swipe, and motorized readers. Magnetic Card Reader are used extensively in various industries. These readers are a key component in ATMs, POS, Credit Cards, and Insert equipment.

What is a cleaning card?

Cleaning cards safely and easily remove dirt and other contaminants from within these devices without costly outside assistance.
The CR80 cleaning card is rarely introduced on the Internet. The cleaning card was soaked in alcohol. Because of its size, it is the same size as our usual cards, so it is rare in life.

Where is the CR80 cleaning card used?

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

We usually carry key card locks, credit card terminals, POS credit/debit card swipe readers, and ATM card readers. ID cards, bus cards, subway cards, and bank cards with us.

As long as we have these cards, the CR80 can come in handy.

How effective is the cleaning card?

CR80 is mainly used to clean the cleaning card at the entrance.

They are effective in removing lotions, magnetic oxides, dirt, and any other contaminants on your readers.

It can not only easily stick away the dust, but the alcohol is easy to volatilize after cleaning, and it is not easy to leave clean marks.
Yousite Technology is a professional manufacturer of CR80 cleaning cards, welcome to call us for negotiation!

Cleaning Cycle For Datacard CP40, CP60 and CP80 Card Printer

Posted on November 17, 2022May 5, 2023 by Adminsoft

Cleaning cycle for Datacard CP40, CP60, and CP80 card printer.

Datacard CP40, CP60, and CP80 series card printers need to clean regularly. It is recommended to clean before a ribbon change or the print quality is poor. You need to prepare Yousite cleaning kits compatible with Datacard: 1 x CR80 cleaning card, and 1 x cleaning sleeve.

Entrust Datacard SP25/35/55/75/CP40/CP60/CP80 Plus Series Cleaning Supplies.

Cleaning The Printer. Run a cleaning card and change the cleaning sleeve when changing the print ribbon.

Then run the cleaning cycle as follow:

1.    Open the printer cover, remove the print ribbon cartridge and remove the cleaning roller.
2.    Remove the blank card stock from the input hopper.
3.    Open the cleaning card package and remove the cleaning card.
4.    Insert the cleaning card into the printer.
5.    Select the “Cleaning Card” option and press the “enter” button.
6.    When the cleaning cycle has been completed, replace the ribbon, replace the cleaning sleeve, and remove the protective paper, then place it back in the printer.
7.    Close the cover and you are ready to print.
For more cleaning kits information. Email(beck): beck@yaostbio.com

Card Printer And Thermal Printer Cleaning Manual

Posted on November 17, 2022November 17, 2022 by Adminsoft

Card printer and thermal printer cleaning manual

Thermal printers worked by heating up the coating on the label or melting the ink on the ribbon. It can easily build up contaminants on the printer head, leading to poor printing. In the printing process of card printers, it will leave some ink, and residue on the transfer roller and cleaning roller. So regularly cleaning your thermal printers and card printers can prolong the life of your printer and improve the print quantity.
There are so many items of card printers and thermal printers, if you are confused about how to choose the cleaning products, then this article may be helpful for you.

Below are four categories of printer cleaning products.

1. Cleaning card

It can be divided into two categories according to the usage: card printer cleaning card and thermal printer cleaning card.
card printer cleaning card includes a CR80 cleaning card and a long cleaning card. CR80 cleaning card can be used on all card printers, ATMs and POS.

A long cleaning card must be used on the corresponding card printer item.

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

For instance, the size of the Zebra P330i T-Long card is 76*330*0.711mm. The thermal printer cleaning card is thinner and softer, it can be used on the thermal print head. You should choose it according to the width of the print head. Similarly, thermal printer cleaning cards can also be used on currency counters and bill scanners.

2. Adhesive cleaning card and Adhesive cleaning roller.

Card printer and thermal printer cleaning manual

Many printers contain a cleaning roller to clean the card before it prints. After you print a number of cards, the stickiness will reduce, you should change the new adhesive cleaning roller then.

The adhesive cleaning card is mainly used to clean the dust on the transfer roller and adhesive roller. Adhesive cleaning cards and adhesive cleaning rollers can only be used on card printers.

3. Cleaning swabs and cleaning pen.

Cleaning swabs and cleaning pens can be used on the print head of card printers and thermal printers. The cleaning swab is disposable and the cleaning pen can use a few times, you can change the pen head if it is very dirty.

4. Cleaning wipes.

A cleaning wipe is used to clean the transfer roller and the cover of the printer. It can also be used on the thermal print head, but you have to make sure the printer is power off before cleaning.
More cleaning methods and cleaning product information. Beck@yaostbio.com

How To Clean Zebra ZXP Series 3 Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

Help maintain card printer performance and reliability · Prolong the life of vital printheads, transport rollers, and magnetic encoder parts.

How to clean Zebra ZXP Series 3 card printer?

When the printer LCD display “clean printer” or the print quality is bad, it’s time to clean your ZXP 3 card printer. Then you need ZXP 1 & ZXP 3 series printer cleaning kits which include:

4 Print engine cleaning cards and 4 Feeder cleaning cards.

Zebra 105999-101/105999-301/105999-302 Cleaning Kits

Zebra 105999-101/105999-301/105999-302 printer cleaning card kit includes four print engine cleaning cards and four feeder cleaning cards. For Zebra ZC Series Printers

1. With the printer powered on and the LCD display showing ready hold down the control button for five seconds, then follow the LCD instructions.

2. Open the printer lid, remove the ribbon, and closed the lid.

3. Now the LCD will display “empty feeder then close cover”. Open the card feeder cover, remove the cards and close the cover.

4. Insert the long cleaning card into the manual card feeds slot. Wait for the cleaning process to complete.

5. When the cleaning process is completed, the cleaning card will be ejected.

6. Open the card feeder cover and insert the feeder cleaning card into the card feeds slot. Close the card feeder cover. Wait for the cleaning process to complete.

7. When the cleaning process is completed, the LCD will display “remove feeder cleaning card”, open the card feeder cover and remove the cleaning card.

8. The cleaning process has been completed. The LCD will display “cleaning done”.

9. Load the cards and close the card feeder cover. Open the printer lid, install the ribbon, and close the lid.

How To Clean The Zebra P330i Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

How to clean a zebra p330i card printer?

After printing 1000 color cards or 5000 monochrome cards, the Zebra P330i LCD will display “cleaning printer”.

And you should clean the printer as soon as possible to ensure good print results.

Then this is a problem, how to clean the Zebra P330i card printer?

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

Steps for cleaning Zebra P330i:

1. Leaving the printer on, press and hold the button for three seconds, the LCD will now display “remove ribbon then close head”,

2. Open the printer lid, lift up the print head carriage then remove the ribbon spools and close the print head carriage. After the ribbon is removed, the LCD will display “MD feeder, and press the button”.

3. Open the card feeder lid and remove all but the bottom card. This card should remain in the feeder until you press the button to eject it from the printer. Do not attempt to pull the card out, or you may damage the feeder.

After the card is removed, the LCD will display” load cleaning card in feeder”.

4. Remove the small cleaning card from its packaging and place it in the car feeder, the feeder belt will move the cleaning card halfway into the feeder.

This is the correct position, do not try to force the card fully into the printer. Once the card cleans the feed belt, it will move through the printer and continue cleaning other components, the LCD will display “cleaning printer” during this process.

After the cleaning card is finished, it will automatically be ejected, the LCD will then display “press button to continue”.

5. Remove the long cleaning card from its packaging, press the button and the message will change to “feed long cleaning card into exit”. Now insert the long cleaning card into the printer exit slot, the long cleaning card will automatically move back and forth as it cleans. The LCD will again display “cleaning printer” during this process.

6. Once the long cleaning card has been ejected, the LCD will change to “ready”. Now you can reinsert the ribbon spools, reload cards and resume printing if you still see spots in your cards after cleaning the printer, you may want to clean the printhead to remove deposits.

7. Before cleaning the print head, turn the printer off, lift the carriage and remove the print ribbon. Then squeeze the plastic stick on the cleaning swab to push the liquid into the tip, now gently move the moistened swap side to side across the printhead elements.

8. Wait two minutes for the print head to dry. Turn the printer back on, and reinsert the ribbon spools.

Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

Multi-function Cleaning Wipe -IPA

Posted on November 17, 2022November 18, 2022 by Adminsoft

IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

Multi-function cleaning wipe -IPA

The use of cleaning wipes is very wide, not only can be used for card printers, and thermal printers to wipe the print head, machine body,
but also can be used to wipe the phone, computer screens, and so on.

In addition to cleaning can also be used for the above places can also be used for a lot of places clean wipes.

Multi-function cleaning wipes.

IPA-M3 size: 127mm * 152mm.

containing 99.9% IPA solution, the use of tin foil bags (to avoid IPA volatile) independent packaging.

Store in a cool place, with a shelf life of 2-3 years.

Yousite is the direct manufacturer of clean wipes, clean wipes production is made by hand.

Each process has professional monitoring and control and strives to do all excellent products.

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable)

Posted on November 17, 2022November 17, 2022 by Adminsoft

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable).

IPA-4.5 Snap swab – 4.5″. Pre-saturated IPA Snap Swab(3″/4.5″ are available). The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

Simply Squeeze or Snap the Plastic Handle and the Foam Head becomes saturated with just the right amount of Cleaning Solution.

Clean the Thermal Print Head by using a back & fourth motion to effectively remove dirt and debris accumulated on the print head thus extending the life of the print head and maintaining a readable image.

Thermal Printer Pre-saturated IPA Cleaning Swab

Lint free, non-abrasive, and pre-saturated with 99.7% IPA (isopropyl alcohol), the foam tips will thoroughly but gently clean delicate parts.

Available in 2 Sizes: 3.0” or 4.5”
Packing: 25 Swabs per Ziplock Bag; 50 Swabs/Box
Part Number: IPASS-3.0 and
Part Number: IPASS-4.5 respectively.

Features:

100 PPI, Open Cell Polyurethane Rectangular Foam Tipped. Non-Abrasive.
Typical Applications: Computer Keyboards. Optical and Magnetic Head Devices. Electronic Components.

Thermal Printer Pre-saturated IPA Cleaning Swab

Posted on November 17, 2022November 17, 2022 by Adminsoft

Thermal Printer Pre-saturated IPA Cleaning Swab

Specifications

-isopropyl alcohol clean swab;
-.Single packed;
-.For ZXP3/7/8, P330i, P330m & P430i printers;
-.NO MOQ;

-FREE SAMPLES

1. Put Quality as the first consideration;
2. Rich export experience of more than 10 years in manufacturing and selling cleanroom and esd products.
3. OEM & ODM, customized design/logo/brand and packaging are acceptable.
4. Advanced production equipment, strict quality testing, and control system to make sure superior quality.
5. Competitive price: we are a professional cleanroom/ESD products manufacturer in China, there is no middleman’s profit,
and you can get the most reasonable price from us.
6. Good quality: We have ISO certification, good quality can be guaranteed, and it will help you keep the market share well.
7. Fast delivery time: we have our own factory, which saves your time to discussing with the trading company, we will try our best to meet your request.

IPA Snap Swab

Posted on November 17, 2022November 24, 2022 by Adminsoft

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to kill bacteria & viruses · Disinfects small & difficult to reach electronics.

IPA alcohol cleaning swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

SNAP Swabs 4.5″ IPA Filled Reservoir Handle (50 swabs)TDS Download

1. For cleaning contaminants from printers
2. 2-3ml 99.9% IPA solution
3. Aluminium Foil Packing

Description

Evolis A5003 Cleaning kit IPA Self-saturated alcohol foam swab. Includes 25 cleaning swabs with a spatula foam tip and isopropanol;

Yousite IPA Snap Swabs are specially designed for cleaning effectively dirt, magnetic oxides, oils, debris,
lotions and other contaminants from all kinds of ID card printers, scanners, readers, and barcoders.
It is a cost-effective way to maintain your card readers and increase the span life of the magnetic heads.
IPA snap swab is one of our card reader Cleaning kits products which also contains cleaning cards,
adhesive cleaning tacky rollers, IPA wipes, and cleaning pens for all kinds of different printers such as Zebra, Magicard, Fargo, Datacard, Evolis, EDI, etc.

Features

Cleaning Card

-Excellent absorbency than the 100%polyester cleaning card.

Electronic-grade IPA Snap Swab.

-Easy, Effective, and Safety.

Aluminum Foil.

-Strong tightness and keep it longer.

Hot-press compound.

-Make sure the most excellent cleaning effect.

Present IPA wipes.

-preventive maintenance for your printer.

Thermal Printer Head Cleaning Pen 99% IPA Solution

Posted on November 16, 2022June 23, 2023 by Adminsoft

The IPA cleaning pen is specially used to clean the thermal print head of all thermal printers, including card printers, barcode printers, label printers, receipt printers, Kiosk printers. It is used to remove ink, dirt, and contamination built up on a thermal printer’s print head.

How do you use a thermal printer cleaning pen?

To clean thermal print heads, swipe the cleaning pen across the entire print head surface. Adding a little pressure as you move the pen across the print head will gently scrub off the burnt-on particles. Repeat if necessary. To clean the pen tip, wipe across the clean paper surface.

【1】.Products Description Cleaning Pen

IPA Printhead Cleaning Pen Holder is filled with 99.9% electronic grade IPA solution.

A.Cleaning pens prolong equipment life and reduce maintenance costs. They remove contaminates from transaction equipment, which have been proven when used regularly they save money.
B.Regular Cleaning extends the service life of the print head and provides a better graphic image quality.

99% IPA Solution Thermal Printer Head Cleaning Pen

【2】.Technical Specification

1. Barrel Length: 143mm;
2.Packing:12 pieces per box;
3. Barrel Diameter: 14.3mm;
4. IPA Volume : 5.0 +/- 0.5 ml;
5. Printhead, PCB, IC, SMC, etc.

IPA cleaning pen is a reusable option for cleaning the thermal print head, each pen can be used 6 to 10 times. After each use, you can scrape the nib on a white clean paper to remove the ink residue on the nib for reuse next time.

【3】.Products Application

All ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print Heads.
All types of thermal printers.
Brand ID card printers: Zebra, Fargo, Magicard, Evolis, etc.
Pcb, IC, cleaning fields.

Used for Routine Preventive Maintenance Cleaning on all types of ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print heads.

99% IPA Solution Thermal Printer Head Cleaning Pen Kits

【4】.Directions

1. To clean the pen tip, wipe across the clean paper surface. Recommended usage is every time a new roll of labels or thermal is needed OR to correct lines or imperfections in the printed copy
2. Repeat if necessary.
3. To clean thermal print heads, swipe the cleaning pen across the entire print head surface.