When the card printer LCD screen displays “CLEAN PRINTER” or the printed image is not clear or complete. It is necessary to use a special cleaning card to clean the printer. In addition, during the printing process, when the sensor is dirty and the card is frequently stuck in the flipper and the “Mechanical” mechanical error is reported, it is also necessary to use a special cleaning card to clean it.
How to clean your credit card machine: tips and steps to follow.
The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer. So please try not to place the printer in a workplace with too much dust or strong sunlight.
Regular cleaning of the printer will keep the printer in top condition, produce better quality results and avoid breakdowns.
Before cleaning the printer, please clean the dust around the inside of the printer. (The surrounding dust may be rotated during printing, floating in the machine, and adsorbed on the print head due to static electricity, causing the print head to break the needle ) Cleaning wipes . Then use the cleaning card to clean the card reader ribbon.
Recommended to use cleaning cards to clean all shafts in the machine. Replace the cleaning roller after each roll of ribbon. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings .
Cleaning of any printer consists of three parts. The cleaning rollers cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine. Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong the service life of the print head. It is recommended to purchase related cleaning kits .
Before cleaning the printer, please use a cleaning swab to clean the dust inside and around the printer. (The dust floating inside the printer may generate static electricity during the printer’s working process. The dust is easy to attach to the print head and cause the print head to break the needle.) And then clean it with a cleaning kit.
Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card. And the cleaning effect cannot be achieved.
Be careful not to damage the print head when opening or closing the cover.
Do not carry hard objects such as watches and rings when inspecting the machine. It is easy to touch the print head and damage the print head.
What are the precautions for the use of IC card readers 1. Plug-in card holder
1. For the plug-in card holder, care should be taken to prevent the card from being inserted too hard. Too much force will damage the in-position switch of the card holder, and it will also damage the card to a certain extent.
2. Pay attention to keep the card clean. If the chip of the card is not clean, not only the card will not work normally, but also the contact point of the card holder will be polluted.
3. It is very important to operate after the card is in place. If the reader powers on the card under unstable conditions, it may cause damage to the card.
4. After the operation of the card in the plug-in card holder is completed, the application program should first send a command to the reader to power off the card, and then pull out the card after power off. Pulling out the card without power off may cause damage to the card.
2. Push-push deck
1. The push-push card holder adopts the push-in card, and the card will pop out when the card is pushed in again when it is taken out. This structure reduces the friction between the card and the electric shock, and has certain advantages in protecting the card. But it can also damage the card if not used correctly.
2. The most common error is that when taking out the card, instead of pushing it in again to make the card pop up automatically, and directly pulling the card out, this situation will seriously damage the card and the card holder.
3. Pay attention to keep the card clean. The card holder of any structure will eventually be in close contact with the chip of the card, so if the chip of the card is not clean, it will pollute the contacts of any kind of card holder.
3. The environment and method of using the IC card
Proper storage and correct use of cardholders are the most economical and effective means to prolong the service life and reliability of IC cards. Proper storage, no random bending, no random contact with the contacts, no random access to strong static electricity environment, pay attention to keep the card surface clean, etc., will help to improve the reliability of the IC card and prolong its service life.
4. Use of cleaning card
The cleaning card is a cleaning measure used after the reader has been used for a period of time and the contacts of the deck are polluted. The method of using the cleaning card is: insert the cleaning card into the reader-writer when the power is cut off, and then clean the electric contact of the deck after inserting it back and forth.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…
The cleaning card is made of polyester, polyethylene, polypropylene or hard paper.
The base material of the CR80 cleaning card is PVC, and the two sides are laminated with wood pulp polyester spunlace cloth, which is soaked in IPA solution.
Inserted into the card machine, and inserted and pulled out several times to clean the card. It is very convenient to clean the contact surface of the machine, and the effect is obvious, which can effectively ensure the long-term normal operation of the card machine.
How to Clean a Card Reader?
Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.
1
1. The IC card reader should be placed on a fixed platform, away from strong magnetic fields. The working environment should be kept tidy, and the surface of the machine should be kept clean.
2
2. Do not allow foreign matter to enter the IC card reader from the cardholder entrance. Including water, oil, etc.
3
3. Regularly clean the deck to keep reading and writing correct. Method: Dip the “cleaning card” with a little alcohol, insert it into the card holder, move back and forth, left and right for several times, then pull it out, wait for a few minutes and then use it.
4
4. If the IC card reader is faulty, please hand it over to the maintenance personnel.
5
5. If it needs to be transported, please use the original packaging to avoid severe impact.
Precautions
To prolong the life of the IC card reader, you must maintain the IC card reader.
IC card (Integrated Circuit Card,), also known as smart card, smart card (Intelligent card), microcircuit card or microchip card, etc.
Where is the cleaning card manufacturer? Which is the better quality
Where are the manufacturers of cleaning card products? Which one is better in quality! Clean Kachina brand – Yousite! Yousite company specializes in the production of cleaning cards , dust-free cotton swabs, cleanroom cotton swabs, etc., with reliable quality, selling well all over the country, and being praised by new and old customers! Welcome new and old customers to consult and purchase: beck@yaostbio.com .
1. In terms of product quantity
The number of cleaning card products must be effectively increased and expanded, not only to meet the growing needs of domestic printer manufacturers, but also to adapt to the latest developments in foreign printer production, actively expand exports, and actively provide foreign printer companies with what they need. Printer cleaning card products required.
2. In terms of product quality
Keep your Fargo ID card printer running smoothly with this 86177 Cleaning Kit with 3 long cleaning cards, 10 adhesive cleaning cards, and 4 cleaning swabs.
In terms of product quality, we must also strive for excellence. To manufacture advanced and high-quality products, the quality must be stable and reliable, not only to meet the precise requirements of the process, but also to ensure the processing quality of the printer. Rod head goes one step further to improve product quality and cleaning effect.
3. In terms of product categories
The types of cleaning card products must also be continuously increased, not only horizontally, but also vertically, to increase the breadth and depth of products, to continuously expand and extend on the original basis, and more importantly, to check for deficiencies and fill in gaps, and strive to be complete. .
Special cleaning card and cleaning kit for precision instruments
Our cleaning cards are laminated with PVC and polyester wood pulp composite cloth, which has excellent water absorption and toughness, and the wood pulp can absorb the IPA solution to slow down the evaporation time.
Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.
All kinds of precision instruments special cleaning card, by the company’s own R & D, production. It is made of PVC material, special precision instrument, cleaning agent, non-woven flannel and vacuum aluminum plastic packing.
适用于专各种磁条刷卡器，IC卡读写器，银行自助设备，加油机等精密设备磁头、IC触点、读写头的清洁。
Apply to all kinds of magnetic stripe card reader, IC card reader, bank self-service equipment, refueling machines and other precision equipment head, IC contacts, reading and writing head cleaning.
Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)
Compatible adhesive cards use low-tack adhesive paper, which can clean the dust on the transfer roller and adhesive roller of the card printer to avoid damage to the print head and ensure the quality of printing. Clean it according to the printer’s operation guide.
能有效的防止精密电子设备由于灰尘、油污和水份引起的设备故障。
It can effectively prevent the breakdown of equipment caused by dust, grease and water.
使用简单方便，有效存贮时间为两年。有一定的溶液性清洁剂刺激性，无腐蚀性。易燃，避光，通风处保存。
It is simple and convenient to use, and the storage time is two years. There is a certain solution detergent, irritating, non corrosive. Flammable, protected from light and stored in a ventilated place.
In addition the company also produces clean cloth, clean foam swabs, cleaning rollers and other equipment cleaning tools, diverse styles, to meet the market most of the cleaning needs.
Fargo Print Head Cleaning Swabs is easy, self-saturating foamtipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.
Cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.
To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.
The user then runs the swab over the print head until it is clean.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…
Adhesive Cleaning Card
Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)
1.Used for Datacard,Fargo,Zebra ZXP3/DNP Card Printers 2.Good Quality and Competitive price
Adhesive Cleaning Card
Description: Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up.
Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads
Features
CR80 is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.
Cleaning Card -Excellent absorbency than the 100%polyester cleaning card
Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.
Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.
Use of cleaning tools
1. Initially open the printer and also obtain the ribbon. 2. Detach the packing bag and also put the cleaning card into the card input box of the printer. 3. Open the properties of the card printer motorist– >; device setups. 4. Select the Devices tab, and click the Printer Cleaning button to clean.
Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.
6. Get the cleansing swab, squeeze the cotton bud stick, and let the liquid drain to the head of the cotton swab. 7. Make use of a swab to carefully wipe the print head of the printer (wipe in one direction). 8. Await the liquid to dry and the body cleansing is finished.
Note – Two cleaning cards are needed for the cleaning procedure. A cleansing card coincides in size with a basic plastic card, we call it a “cleaning card”. The various other card is bigger as well as wider at one end, we call it the “Long Cleaning Card“.
Cleaning Process
1. Leave the printer powered on, or transform it on if it is out.
2. You can begin the cleansing procedure with one of the adhering means: Press and hold the printer’s panel button for a couple of secs up until the message get rid of RIBBONTHEN CLOSE HEAD appears on the LCD. Go to the P330i Printer Devices software application from your computer system as well as click the CLEAN button. The LCD will certainly show the REMOVE BOW AFTER THAT SHUT HEAD message.
3. Open up the major cover, release the printhead owner, and eliminate the bow. Close the printhead owner. The LCD panel will display the EMPTY message.
4. Open up the card feeder cover, and afterward remove the card from the card feeder. The last card is tough to get rid of and can be left in the feeder. Press the panel switch on the front of the printer. Cards left in the feeder will be expelled. The LCD panel will certainly display the message tons CLEANSING CARD IN FEEDER.
5. Place the pre-soaked cleaning card right into the card feeder. The cleaning card will immediately be fed right into the printer and the cleaning procedure will certainly begin (there is a hold-up of a few secs after feeding the cleaning card prior to the cleaning step beginning). Throughout cleaning, the LCD will certainly display the message cleansing PRINTER.
6. When this part of the cleansing process is full, the cleaning card will pop out as well as the LCD will certainly present the message PRESS SWITCH TO CONTINUE.
7. After the user presses the panel button, the LCD will certainly show the message FEED LONG CLEANING CARD IN LEAVE. Place the longer end of the lengthy cleansing card into the card leave (located straight over the outcome hopper). When the user inserts a “normal” cleansing card right into the card slot, the LCD will display the INVALID CARD, PRESS BUTTON message till the individual presses the panel button and also inserts a long card right into the card port.
8. The lengthy cleansing card will be immediately fed right into the printer and also the printing process will begin. The LCD will present the CLEAN PRINTER message once more.
9. When the cleaning procedure is total, the long cleaning card will pop out, and also the LCD will certainly show a READY message, indicating that the printer prepares to resume normal printing procedures. Note – Two cleansing cards are required for the cleaning process. A cleansing card coincides with size as a general plastic card, we call it a “cleaning card“. The other card is larger as well as broader at one end, we call it the “Long Cleansing Card”.
Keep in mind – If the user does nothing right now (as an example, no lengthy cleansing card put), the LCD will transform to display CLEAN PRINTER after a timeout. The printer can print, however the LCD will remain to display CLEAN PRINTER. This limited cleaning process does not execute a detailed cleansing. However, it can be done without the “lengthy cleaning card”. To return the screen to READY, the user is required to perform the complete cleansing procedure from step 2 above with step 9 listed below making use of both lengthy and brief cleaning cards.
10. The cleansing card can just be used as soon as and also must be disposed of after usage.
2-3 weeks for shipment after order confirmation Requirements.
1. Blending polyester, spun shoelace, cellulose, and PVC card. 2. For cleaning impurities from Zebra printers. 3. P330i/P120i/P100i clean.
Description.
The saturated disposable cleaning card: for cleansing effectively dust, magnetic oxides, oils, particles, creams, as well as other pollutants from all kinds of ID card printers, scanners, visitors, and barcodes.
It is an economical way to maintain your card viewers and also boost the life span of the magnetic heads.
This Presaturated Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo, and optic sensors on all types of reader mechanisms.
The card Reader requires preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads
1. Products Description This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo, and optic sensors on all types of reader mechanisms.
Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.
1) All Card Readers 2) ATM/POS Terminals 3) Petroleum Pumps 4) ID Printers 5) Optical/Barcode 6) Hotel Doorlock 7) Slot/Vending Machine
Card Reader cleaning cards Description:
Card Dimensions (L x W)
2 1/8 “ x 3 3/8”
Card Thickness
0.028” (+ 0.002 / – 0.001)
Card Construction
Non-woven / plastic / non-woven
Saturation
99% Isopropyl Alcohol
Saturation Volume
3 ML (+/- 0.5 ML)
Inner Pack
50 saturated cards
Inner Pack Weight
0.68 lbs
Inner Pack Dimensions
H: 3 11/32” W: 5 ¼” D: 2 3/8”
Inner Pack Construction
Standard Clay Coated Chipboard Box
Standard Packing
25 pcs per box,100 boxes per case .
Cleaning wipes
IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo and optic sensors on all types of reader mechanisms. Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up.
Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.
Pre-saturated ATM/ CARD READER Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads Individually packaged Non-abrasive Safe on plastics Fast evaporation Card Reader / ATM cleaning card All Card Readers ATM/POS Terminals Petroleum Pump Time/Badge Slot/Vending Optical/Barcode Smart Card
How to use card printer cleaning card
1. Required cleaning tools
Magicard M9005-761 Card Printer Cleaning Kit 10 T-Type Long Card, 1 Cleaning Pen, 5 Cleaning Rollers. For the Magicard Rio, Tango and Avalon printers.
1. First open the printer and take out the ribbon.
2. Tear off the packing bag and put the cleaning card into the card input box of the printer.
3. Open the card printer driver’s properties -> device settings.
4. Select the Tools tab, and click Printer
6. Take out the cleaning cotton swab, squeeze the cotton swab stick, and let the liquid flow out to the head of the cotton swab.
7. Use a cotton swab to gently wipe the print head of the printer (wipe in one direction).
The Fargo 081518 cleaning kit includes everything you need to clean the inside of your Fargo DTC printer to keep it working optimally.
8. Wait for the liquid to dry and the body cleaning is complete.
3. Replace the cleaning rubber rollers. It’s roughly like this. If you want to see a specific and clear introduction, you can go to Beijing Fagao Sunshine. They have a clear explanation of the card machine with pictures, which is very clear and easy to understand.
Card Printer Tutorial
If you want to print hard cards, you may need a dedicated card printer to print hard cards.
How to print the credit card machine
first step:
Long press the on/off button of the credit card machine to turn it on. Some card machines have an account number and password, and you need to enter the password to sign in before you can use it.
Step two:
Press the “Confirm” button on the card reader, and then the card reader will enter the menu page, which will generally display: “1. Consumption; 2. Balance inquiry; 3. Cancellation; 4. Sign in; 5. Print; 6. Management; 7. Other” options.
third step:
We use it when we use the credit card machine for consumption, so we can press the “1 key” to select “Consumption”.
the fourth step:
Insert the IC card, if the card does not have a chip, just swipe the card directly in the card slot of the card reader. After the card is swiped successfully, the card number will be displayed on the screen of the card reader, just press “Confirm” after checking.
the fifth step:
That is to say, if the amount you swipe your card is 100, you have to enter 10000 on the credit card machine.
Step six:
After entering the amount, enter the transaction password of the card, confirm that the password is correct, and press the “Confirm” button, and the card reader will successfully swipe the card.
How does the printer swipe the card to print?
Supplement: If you have opened a telephone banking service, you can also complete it through telephone consultation.
How to use the card printer
Card printer consumables have a number of sheets. One set can print 1,000 single-sided cards. In fact, the number of printed cards may be less than 1,000, so budget your own consumables according to your punching volume.
How to clean the card printer
1. Make sure that the power of our printer is turned on.
2. Go back to the computer connected to the printer and click the “Start” menu on the desktop. Then you can see the “Devices and Printers” option in the start menu, click it.
3. After entering the device interface, we can see our printer. Find the printer we want to clean and click the right mouse button, you can see “Printer Properties” in the pop-up menu bar, click it.
4. After entering the printer properties interface, we can find the “Maintenance” option in the interface and click it.
5. In the maintenance interface, we can see the “cleaning” option, click it.
6. After that, an interface will pop up, click the “Execute” option on it.
7. Finally, an interface will pop up saying that our printer is cleaning, just click OK.
1. Click Start in the lower-left corner of the computer. Select Printers and Devices, select the printer driver icon, and what you need to click here is Printing Preferences.
Click the application tool tab, first perform the nozzle inspection on the upper left, at this time the printer will print a piece of paper with a slanted mesh image on it, you can easily see if there are broken lines or incomplete places, if so, you need to Perform nozzle cleaning, which is the second button from the upper left.
How to use the card printer cleaning card
1. Ribbon deviation occurs during printing
The main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor quality of the ribbon cutting.
2. The printing is not clear and the quality is poor
There may be the following reasons:
1. The temperature of the print head is too low or the print density is too light . 2. The print head is not installed correctly
3. There is always a shallow thin line on the label printed by the printer
If your printer has such a problem, it proves that you have not done enough to maintain the printer.
When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.
If the printer punches a card and there is a large area of the card that is not printed, there are two possibilities:
1. The print head is seriously damaged. 2. The data cable of the print head is damaged. If this happens to your printer, please contact our engineers to confirm the damaged part and repair method.
The damage of the print head is irreparable. In this case, only a new print head can be replaced.
The way to avoid this situation is: 1. Pay attention to cleaning the printer regularly. 2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions). 3. Be careful not to touch the print head when opening or closing the case cover. 4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).
If your print head is damaged, you will need to purchase a new print head to replace it.
4. Occasionally, some spots will appear on the label printed by the printer
If there are some spots on your printed cards, it is because your printer has accumulated dust and needs to be cleaned in time. It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage.
If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head.
The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (it is best to wipe each card with an eye cloth before printing), so that the printed card will not be flawed.
5. How to solve the problem of ribbon wrinkling
Reason:
1. 2 Temperature setting is incorrect; 3 Printhead pressure and balance are not set correctly; 4 Media is not set correctly for the feed;
Solution:
1 Reinstall the medium correctly 2 Adjust the printing temperature to meet the printing requirements as much as possible 3 Reset the minimum pressure required for printing 4 Reset the correct paper feeding amount of the medium
6. Why does the ribbon “stick” to the cloth label?
When the barcode machine is printing the cloth label (tape), some types of barcode machines will have the carbon tape and the cloth label stick together.
Let’s take a look at how the carbon ribbon and the cloth label are glued together:
The thermal transfer barcode machine is like a hot stamping machine, except that the hot stamping machine uses gold paper, while the barcode machine uses carbon ribbons. They are all one material that is attached to another material through high temperature. If the printed material is melted at this temperature, it will stick to the carbon ribbon or gold paper.
After clarifying this relationship, we can lower the temperature of the hot spot of the printing hair of the bar code machine or reduce the pressure of the printing head, which can prevent the ribbon from sticking to the cloth label, but sometimes this method is not It is suitable for any barcode machine (low-end barcode machine). At this time, they can pull the cloth label when printing the cloth label (remember to pull it at the beginning of printing!) so that it can also be slightly raised in usefulness.
The most thorough way is to change to an industrial barcode machine with better performance. This kind of barcode machine will not appear in this situation when printing. In addition, if you really don’t want to change it, you can also put the barcode machine in an air-conditioned room. This will improve the situation. Some customers say the conditions are better in winter than in summer! Maybe it’s the ambient temperature.
IPA SNAP Swabs for Thermal Printer and Card Printer
Cleaning snap swabs4.5” IPA Snap Swab for Cleaning Printerheads is easy, self-saturating foam-tipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.
Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to disinfect small & difficult to reach electronics.
The cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past. To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip. The user then runs the swab over the print head until it is clean.
1. Products Description
IPA Snap Swabs is an easy, self-saturating foam-tipped cleaning swab. It is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers. The cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past. To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip. The user then runs the swab over the print head until it is clean.
