Home » FAQ » Page 4

Card Printer Alcohol Cleaning Swab

Posted on December 6, 2022December 6, 2022 by Adminsoft

Fargo Card Printer Alcohol Cleaning Swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

Specifications

.Sterile Swabs;

.Clean the termal printhead;

. 4.5″ handle with IPA filled;

.free sample;

.OEM available;

Fargo card printer alcohol cleaning swab , 4.5” IPA Filled Reservoir Handle, 25/box;

YOUSITE TDS IPA Snap Swab 4.5

Fargo Print Head Cleaning Swabs is easy, self-saturating foamtipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.

Cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.

To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.

The user then runs the swab over the print head until it is clean.

Thermal Printer and Check Scanner Cleaning Card

Posted on December 3, 2022May 5, 2023 by Adminsoft

Thermal Printer and Check Scanner Cleaning Card

Detailed introduction to Thermal Printer and Check Scanner Cleaning Card:

Thermal Printer Cleaning Cards were developed to provide a preventive Maintenance cleaning to remove dirt and debris from print heads.

By cleaning Your Thermal Printer on a regular basis you are maintaining the print image, Extending the life of the print head, and will have accurate and readable Print/barcode images.

Cleaning Card width should be determined by the maximum width of your thermal print head.

We can provide various sizes to fit most the thermal printer type. Cleaning cards, ATM/POS terminals cleaning cards Card Reader.

Cleaning Cards, suitable for all card readers, card printers, ATM/POS terminals, petroleum machines, smart cards, etc.

Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads

Thermal printers cleaning cards zebra magicard evolis card printer cleaning card
Card reader cleaning cards will safely and effectively remove dirt, magnetic oxides, oils, lotions, and other pollutants built on the magnetic heads.
Cleaning cards are a cost-effective way to maintain your card readers and prolong the life of magnetic heads.

It will clean:
Swipe ATMs Credit/Debit card readers POS terminals PVC card printer Access control card reader Gas station equipment Pay phones Hotel door locks Parking system equipment IC card readers Smart card readers More manual swipe readers and insertion readers Usage: To clean the swipe readers: Simply swipe the cleaning card through the card reader back and forth,until there are no residues in card reader.
To clean the insertion readers: Insert the cleaning card into the reader,then quit. Repeat this action several times,until there are no residues in card reader. After cleaning, simply dispose of the card. We recommend: Once per day for external or high usage card readers.

Card Readers Cleaning card

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.

Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads Card reader cleaning cards will clean:

Credit & Debit Card Swipe Terminals
POS Terminals
Swipe ATM Machines
Petroleum Pump Card Readers
Credit Vending Machines
Security/Time/Badge Readers
Smart Card Readers
Telephone Card Readers
Slot Machines
Hotel Door Locks
Key Card Readers

Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.

Yousite Examine Scanner cleaning card This Presaturated Cleansing Card is layout to clean effectively as it transfers through the feed course cleaning up the Sensitive Magnetic Heads, Lens, and also Move Rollers. This card protects against processing hold-ups and misreads as it gets rid of contaminants from check viewers/ scanner/MICR feed courses, rollers, as well as heads. A larger Surface Area Cleaning Card with a Broader Width and Longer Size design permitted the Scanner to Clean better and More Effectively. Preventive Upkeep Cleansing Cards have been accepted by OEMs to supply a Positive Cleansing Efficiency and also expand the Life span of the Examine Scanner.

Remove dust, debris, and oils that build up over time during the normal operation of your remote deposit check scanner. Check Scanner Cleaning Kit

Sizes Setup are readily available with a Basic thickness of Tolerance: 0.012″ +/- 0.003″ or (0.305 +/- 0.0762 in mm).

– 2.0 x 6.0 (inches) or 50.8 x 152.4 (mm).
Component Number: CSCC- 0206.
– 2.5 x 6.0 (inches) or 63.5 x 152.4 (mm).
Component Number: CSCC- 2506.
– 4.0 x 6.0 (inches) or 101.6 x 152.4 (mm).
Component Number: CSCC- 0406.
– 4.375″ X 8″ X 0.018″ or 111 X 203 （ mm).
Part Number: CSCC- 437508.
– 4″ X 8″ X 0.012″.
Part Number: CSCC- 0408.
– 4″ X 10″ X 0.012″.
Component Number: CSCC- 0410.
– 4.5″ X 7.25″ X 0.012″.
Part Number: CSCC-45725.

Pre-saturated as well as individually secured.

Lowers residue build-up without taking apart devices.

Quick, easy, economical preventative upkeep.

Application:

Tags and Invoices thermal printer cleansing card, including Receipt Printers/ Upc code Printers as well as Label Printers, and Tickets.
Printers, Airline Boarding Pass Printers, or Readers Cleansing Cards.

– Suggested Use: Once each day in high-use areas and when each week in reduced-usage areas.

Card Reader Plastic Cleaning Card

Posted on December 1, 2022June 23, 2023 by Adminsoft

ATM/Card Reader Cleaning Card CR80

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo and optic sensors on all types of reader mechanisms.
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up.

Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.

Pre-saturated ATM/ CARD READER Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads
Individually packaged Non-abrasive Safe on plastics Fast evaporation Card Reader / ATM cleaning card All Card Readers ATM/POS Terminals Petroleum Pump Time/Badge Slot/Vending Optical/Barcode Smart Card

How to use card printer cleaning card

1. Required cleaning tools

Magicard M9005-761 Card Printer Cleaning Kit 10 T-Type Long Card, 1 Cleaning Pen, 5 Cleaning Rollers. For the Magicard Rio, Tango and Avalon printers.

1. Cleaning card 2. IPA Cleaning swab 3. Cleaning rollers.

2. Use of cleaning tools

1. First open the printer and take out the ribbon.

2. Tear off the packing bag and put the cleaning card into the card input box of the printer.

3. Open the card printer driver’s properties -> device settings.

4. Select the Tools tab, and click Printer

6. Take out the cleaning cotton swab, squeeze the cotton swab stick, and let the liquid flow out to the head of the cotton swab.

7. Use a cotton swab to gently wipe the print head of the printer (wipe in one direction).

The Fargo 081518 cleaning kit includes everything you need to clean the inside of your Fargo DTC printer to keep it working optimally.

8. Wait for the liquid to dry and the body cleaning is complete.

3. Replace the cleaning rubber rollers. It’s roughly like this. If you want to see a specific and clear introduction, you can go to Beijing Fagao Sunshine. They have a clear explanation of the card machine with pictures, which is very clear and easy to understand.

Card Printer Tutorial

If you want to print hard cards, you may need a dedicated card printer to print hard cards.

How to print the credit card machine

first step:

Long press the on/off button of the credit card machine to turn it on. Some card machines have an account number and password, and you need to enter the password to sign in before you can use it.

Step two:

Press the “Confirm” button on the card reader, and then the card reader will enter the menu page, which will generally display: “1. Consumption; 2. Balance inquiry; 3. Cancellation; 4. Sign in; 5. Print; 6. Management; 7. Other” options.

third step:

We use it when we use the credit card machine for consumption, so we can press the “1 key” to select “Consumption”.

the fourth step:

Insert the IC card, if the card does not have a chip, just swipe the card directly in the card slot of the card reader. After the card is swiped successfully, the card number will be displayed on the screen of the card reader, just press “Confirm” after checking.

the fifth step:

That is to say, if the amount you swipe your card is 100, you have to enter 10000 on the credit card machine.

Step six:

After entering the amount, enter the transaction password of the card, confirm that the password is correct, and press the “Confirm” button, and the card reader will successfully swipe the card.

How does the printer swipe the card to print?

Supplement: If you have opened a telephone banking service, you can also complete it through telephone consultation.

How to use the card printer

Card printer consumables have a number of sheets. One set can print 1,000 single-sided cards. In fact, the number of printed cards may be less than 1,000, so budget your own consumables according to your punching volume.

How to clean the card printer

1. Make sure that the power of our printer is turned on.

2. Go back to the computer connected to the printer and click the “Start” menu on the desktop. Then you can see the “Devices and Printers” option in the start menu, click it.

3. After entering the device interface, we can see our printer. Find the printer we want to clean and click the right mouse button, you can see “Printer Properties” in the pop-up menu bar, click it.

4. After entering the printer properties interface, we can find the “Maintenance” option in the interface and click it.

5. In the maintenance interface, we can see the “cleaning” option, click it.

6. After that, an interface will pop up, click the “Execute” option on it.

7. Finally, an interface will pop up saying that our printer is cleaning, just click OK.

How to use the printer cleaning card

1. Click Start in the lower-left corner of the computer. Select Printers and Devices, select the printer driver icon, and what you need to click here is Printing Preferences.

Click the application tool tab, first perform the nozzle inspection on the upper left, at this time the printer will print a piece of paper with a slanted mesh image on it, you can easily see if there are broken lines or incomplete places, if so, you need to Perform nozzle cleaning, which is the second button from the upper left.

How to use the card printer cleaning card

1. Ribbon deviation occurs during printing

The main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor quality of the ribbon cutting.

2. The printing is not clear and the quality is poor

There may be the following reasons:

1. The temperature of the print head is too low or the print density is too light
. 2. The print head is not installed correctly

3. There is always a shallow thin line on the label printed by the printer

If your printer has such a problem, it proves that you have not done enough to maintain the printer.

When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.

If the printer punches a card and there is a large area of the card that is not printed, there are two possibilities:

1. The print head is seriously damaged. 2. The data cable of the print head is damaged. If this happens to your printer, please contact our engineers to confirm the damaged part and repair method.

The damage of the print head is irreparable. In this case, only a new print head can be replaced.

The way to avoid this situation is: 1. Pay attention to cleaning the printer regularly. 2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions). 3. Be careful not to touch the print head when opening or closing the case cover. 4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).

If your print head is damaged, you will need to purchase a new print head to replace it.

4. Occasionally, some spots will appear on the label printed by the printer

If there are some spots on your printed cards, it is because your printer has accumulated dust and needs to be cleaned in time. It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage.

If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head.

The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (it is best to wipe each card with an eye cloth before printing), so that the printed card will not be flawed.

5. How to solve the problem of ribbon wrinkling

Reason:

1.
2 Temperature setting is incorrect;
3 Printhead pressure and balance are not set correctly;
4 Media is not set correctly for the feed;

Solution:

1 Reinstall the medium correctly
2 Adjust the printing temperature to meet the printing requirements as much as possible
3 Reset the minimum pressure required for printing
4 Reset the correct paper feeding amount of the medium

6. Why does the ribbon “stick” to the cloth label?

When the barcode machine is printing the cloth label (tape), some types of barcode machines will have the carbon tape and the cloth label stick together.

Let’s take a look at how the carbon ribbon and the cloth label are glued together:

The thermal transfer barcode machine is like a hot stamping machine, except that the hot stamping machine uses gold paper, while the barcode machine uses carbon ribbons. They are all one material that is attached to another material through high temperature. If the printed material is melted at this temperature, it will stick to the carbon ribbon or gold paper.

After clarifying this relationship, we can lower the temperature of the hot spot of the printing hair of the bar code machine or reduce the pressure of the printing head, which can prevent the ribbon from sticking to the cloth label, but sometimes this method is not It is suitable for any barcode machine (low-end barcode machine). At this time, they can pull the cloth label when printing the cloth label (remember to pull it at the beginning of printing!) so that it can also be slightly raised in usefulness.

The most thorough way is to change to an industrial barcode machine with better performance. This kind of barcode machine will not appear in this situation when printing. In addition, if you really don’t want to change it, you can also put the barcode machine in an air-conditioned room. This will improve the situation. Some customers say the conditions are better in winter than in summer! Maybe it’s the ambient temperature.

Card Reader Cleaning Cards How to Use?

Watch this video on YouTube

IPA SNAP Swabs for Thermal Printer and Card Printer

Posted on November 30, 2022November 30, 2022 by Adminsoft

IPA SNAP Swabs for Thermal Printer and Card Printer

Cleaning snap swabs 4.5” IPA Snap Swab for Cleaning Printerheads is easy, self-saturating foam-tipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to disinfect small & difficult to reach electronics.

The cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past. To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip. The user then runs the swab over the print head until it is clean.

1. Products Description

IPA Snap Swabs is an easy, self-saturating foam-tipped cleaning swab.
It is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.
The cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.
To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.
The user then runs the swab over the print head until it is clean.

2. Features

1). Self-saturating foam tip;
2). Reduces residue build-up without dismantling equipment;
3). Quick, easy, inexpensive preventative maintenance.

3. Application

1) Computer Keyboards.
2) Optical and Magnetic Head Devices.
3) Electronic Components.

What Is The Cleaning Card For?

Posted on November 21, 2022May 5, 2023 by Adminsoft

What Is The Cleaning Card For?

The Cleaning Card is essential to the consistent credit card and the debit card reads on your POS Terminal. A credit card has oils and dirt on its surface. With every swipe into your credit card reader, these contaminants are transferred into the card reader and onto the magnetic heads.

This accumulation of dirt and oils is 80% of the reason why these readers fail.

Every time a credit card transaction has manually entered the fees for that transaction are increased by as much as 2%.

The increase in fees and the time it takes for an employee to enter the number manually are essentially eliminated for a fraction of the cost with regular preventive maintenance.

The use of cleaning cards will prolong the life of the reader.

Widely used in various types of card printers, POSE machine card inlet cleaning, hotel access control system cleaning, IC card refueling machine cleaning, automatic ticket machines, etc.

Used in the cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health, and various public places.

It is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

For Credit Card Readers

Designed to thoroughly clean the reading mechanism for credit card readers. A regular preventative maintenance program will eliminate misreads and keep customers happy. Available in both flat and waffle styles.

For Printheads

Designed to remove build-up and contaminants on the thermal printhead within the printer.

When cleaning the card printer, first open the printer to take out the color ribbon, then tear off the packaging bag, and put the cleaning card into the card input box of the printer. Open the printing preferences of the card printer driver, select the Tools tab, and click the Printer Self Cleaning button to clean. The card is automatically ejected after cleaning is completed.

Take out the cleaning swab, squeeze the stick of the cotton swab, and let the liquid flow out to the head of the cotton swab. Use a cotton swab to gently wipe the printer’s print head (wipe in one direction). Wait for the liquid to dry and the cleaning is complete.

Magicard Turbo Cleaning Kit #N9003-564MED. 50 cleaning cards; 3 printhead cleaning pens; For Magicard Turbo printers. All Magicard Printers.

And the static electricity generated by the machine equipment will attract dust to adhere. Those card reader devices will fail to read the card or in case of failure.

Therefore, it is necessary to perform manual maintenance and cleaning from time to time. But simple manual maintenance and cleaning are time-consuming and labor-intensive.

It is also expensive, and the cost performance is very low.

Yousite company has produced a cleaning product, mainly used to clean various card reader equipment. Just insert the cleaning card into the machine equipment, and it can effectively clean the inside of the card reader several times in a row, and clean the card reader. The material is microfiber, which will not cause damage to the inside of the card reader. It is cheap and easy to use. If you have relevant needs, please contact us in time.

Where Is The CR80 Cleaning Card Used?

Posted on November 19, 2022May 5, 2023 by Adminsoft

What is a CR80 cleaning card? How does a cleaning card cleaning affect you? These series of questions are bothering friends who know about the CR80 cleaning card. Yousite is to tell you so that you can fully understand what is cleaning card.

Where can the CR80 cleaning card be used?

The cleaning card cleans the read head and the entire track of a magnetic stripe reader in one pass. The card can be used in the insert, swipe, and motorized readers. Magnetic Card Reader are used extensively in various industries. These readers are a key component in ATMs, POS, Credit Cards, and Insert equipment.

What is a cleaning card?

Cleaning cards safely and easily remove dirt and other contaminants from within these devices without costly outside assistance.
The CR80 cleaning card is rarely introduced on the Internet. The cleaning card was soaked in alcohol. Because of its size, it is the same size as our usual cards, so it is rare in life.

Where is the CR80 cleaning card used?

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

We usually carry key card locks, credit card terminals, POS credit/debit card swipe readers, and ATM card readers. ID cards, bus cards, subway cards, and bank cards with us.

As long as we have these cards, the CR80 can come in handy.

How effective is the cleaning card?

CR80 is mainly used to clean the cleaning card at the entrance.

They are effective in removing lotions, magnetic oxides, dirt, and any other contaminants on your readers.

It can not only easily stick away the dust, but the alcohol is easy to volatilize after cleaning, and it is not easy to leave clean marks.
Yousite Technology is a professional manufacturer of CR80 cleaning cards, welcome to call us for negotiation!

How To Clean Zebra ZXP Series 3 Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

Help maintain card printer performance and reliability · Prolong the life of vital printheads, transport rollers, and magnetic encoder parts.

How to clean Zebra ZXP Series 3 card printer?

When the printer LCD display “clean printer” or the print quality is bad, it’s time to clean your ZXP 3 card printer. Then you need ZXP 1 & ZXP 3 series printer cleaning kits which include:

4 Print engine cleaning cards and 4 Feeder cleaning cards.

Zebra 105999-101/105999-301/105999-302 Cleaning Kits

Zebra 105999-101/105999-301/105999-302 printer cleaning card kit includes four print engine cleaning cards and four feeder cleaning cards. For Zebra ZC Series Printers

1. With the printer powered on and the LCD display showing ready hold down the control button for five seconds, then follow the LCD instructions.

2. Open the printer lid, remove the ribbon, and closed the lid.

3. Now the LCD will display “empty feeder then close cover”. Open the card feeder cover, remove the cards and close the cover.

4. Insert the long cleaning card into the manual card feeds slot. Wait for the cleaning process to complete.

5. When the cleaning process is completed, the cleaning card will be ejected.

6. Open the card feeder cover and insert the feeder cleaning card into the card feeds slot. Close the card feeder cover. Wait for the cleaning process to complete.

7. When the cleaning process is completed, the LCD will display “remove feeder cleaning card”, open the card feeder cover and remove the cleaning card.

8. The cleaning process has been completed. The LCD will display “cleaning done”.

9. Load the cards and close the card feeder cover. Open the printer lid, install the ribbon, and close the lid.

How To Clean The Zebra P330i Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

How to clean a zebra p330i card printer?

After printing 1000 color cards or 5000 monochrome cards, the Zebra P330i LCD will display “cleaning printer”.

And you should clean the printer as soon as possible to ensure good print results.

Then this is a problem, how to clean the Zebra P330i card printer?

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

Steps for cleaning Zebra P330i:

1. Leaving the printer on, press and hold the button for three seconds, the LCD will now display “remove ribbon then close head”,

2. Open the printer lid, lift up the print head carriage then remove the ribbon spools and close the print head carriage. After the ribbon is removed, the LCD will display “MD feeder, and press the button”.

3. Open the card feeder lid and remove all but the bottom card. This card should remain in the feeder until you press the button to eject it from the printer. Do not attempt to pull the card out, or you may damage the feeder.

After the card is removed, the LCD will display” load cleaning card in feeder”.

4. Remove the small cleaning card from its packaging and place it in the car feeder, the feeder belt will move the cleaning card halfway into the feeder.

This is the correct position, do not try to force the card fully into the printer. Once the card cleans the feed belt, it will move through the printer and continue cleaning other components, the LCD will display “cleaning printer” during this process.

After the cleaning card is finished, it will automatically be ejected, the LCD will then display “press button to continue”.

5. Remove the long cleaning card from its packaging, press the button and the message will change to “feed long cleaning card into exit”. Now insert the long cleaning card into the printer exit slot, the long cleaning card will automatically move back and forth as it cleans. The LCD will again display “cleaning printer” during this process.

6. Once the long cleaning card has been ejected, the LCD will change to “ready”. Now you can reinsert the ribbon spools, reload cards and resume printing if you still see spots in your cards after cleaning the printer, you may want to clean the printhead to remove deposits.

7. Before cleaning the print head, turn the printer off, lift the carriage and remove the print ribbon. Then squeeze the plastic stick on the cleaning swab to push the liquid into the tip, now gently move the moistened swap side to side across the printhead elements.

8. Wait two minutes for the print head to dry. Turn the printer back on, and reinsert the ribbon spools.

Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

CR80 Single-sided Or Double-sided Adhesive Cleaning Card

Posted on November 12, 2022June 23, 2023 by Adminsoft

CR80 single-sided double-sided adhesive cleaning card

Yousite company is a direct manufacturer of card printer cleaning kits, and the products can completely replace the original products. Not only the product price is low and the quality is high, but it can also reduce the transportation cost. Everything is based on the interests of customers. As long as there is a need, we will try our best to satisfy you. Yousite company only makes high-quality products!

CR80 adhesive cleaning card is divided into single-sided and double-sided. The standard size is 54*86mm, made of high-quality PVC cards and imported low-viscosity adhesive paper, 50 pieces/box. Use with any machine in need. The most used ones are Evolis/DNP/HITI Chengyan CS200E and so on.

CR80 Single-sided Or Double-sided Adhesive Cleaning Card

Card Reader Cleaning Cards

CR80 adhesive cleaning cards are made of imported low-viscosity adhesive paper, unlike some inferior adhesive paper used in the market to reduce costs. When cleaning, the machine may be jammed, and the machine may be damaged if it is serious. So please do not choose them just because of their low price, quality is the most important thing. The price is a little bit different, why don’t you choose a quality product? In this way, you can not only use it with confidence but also use it comfortably!

Thermal printers, card printers, and thermal printers, are mainly used for cleaning cards, cleaning pens, and cleaning foam swabs to clean up

CR80 cleaning card is a very practical cleaning card with the same size as ID card, bank card and subway card, so it can be used in a wide range of applications, such as printers, self-service cash machines, self-service ticket machines, vending machines, etc. Cargo planes, etc., are very easy to use, and the cleaning effect is also very good. Now the CR80 cleaning card produced by Shenzhen Yousite company has two kinds of packaging, one is the packaging bag with Yousite company LOGO printed on it, and the other is neutral packaging with some simple instructions on it, and there is no Yousite company company any sign of .

Card Reader Cleaning Cards How to Use?

Watch this video on YouTube

If you want to use your own LOGO in the process of ordering, it is also possible. As long as your order quantity reaches a certain standard, we can customize exclusive packaging bags according to your specific needs to meet your needs. Multi-packaging looks forward to your consultation and cooperation.

Email(beck): beck@yaostbio.com

How Do You Clean A Bill Counter?

Posted on November 12, 2022May 5, 2023 by Adminsoft

Bill counter cleaning

The money counter is an indispensable tool in the financial field. Money counters are widely used in banks, companies and other financial enterprises such as securities companies and funds.

However, during the process of use, the sensor head on the banknote counter will inevitably be polluted by the dust and dirt on the banknotes, and may become insensitive or jammed.

Therefore, daily maintenance and cleaning are required to prevent malfunctions.

The method of removing dust from the banknote counter is as follows:

1. The dust of the ultraviolet lamp can be cleaned with a brush or a rag, but the power cord of the machine must be unplugged first to avoid electric shock;

2. After clearing the dust on the lamp tube, the dust box of the machine can be cleaned. For the banknote counter with a dust suction device, the dust sucked by the dust suction device is installed in the dust box, which can be disassembled. Come down and clean up.

Note: The mechanism of the banknote counter is relatively complicated. Do not touch the place that cannot be touched with a brush or a rag, otherwise it is easy to damage the machine.

What products do you need to use to clean the banknote counter without damaging the banknote counter itself?

Shenzhen Yousite company is a professional manufacturer of all kinds of cleaning cards. For the cleaning of currency counters and other equipment, there is a special production of cleaning cards for currency counters. Vacuum-packed after soaking in relevant organic cleaning solutions. The use of this cleaning cloth is very simple. Simply disassemble and wipe gently to clean the sensor head of the money counter, improve the recognition effect, and reduce the chance of equipment failure.