Zebra ZC100 Card Printer Does Not Feed The Card?

Posted on March 10, 2021February 11, 2023 by Adminsoft

ZEBRA ZC100 card printer does not feed the card, how to solve the problem of card jam?

Recently, when a customer was using the ZC100 printer, it was prompted that the card feed was blocked, and the printer would not feed the card. The customer used the cleaning card to clean and maintain the printer. After the cleaning was completed, the printer could print a few pages or a few days normally.

From time to time, the same error of not feeding the card appears again. In this case, the cleaning operation again cannot solve the problem of the card feeding blockage. We think that the card feeding wheel of the machine has been used for a long time and is too worn, so the card feeding wheel needs to be replaced ,

(1) Remove the card feed rollers of the printer, confirm that it is too worn, and replace it.

(2) Replace the card feed rollers with a new one, the problem of card feed jam is solved, and the printer can be used normally.

(3) Replace it and install it on the card feeding assembly of the printer.

How to Clean Fargo DTC4500 Card Printer

Posted on February 17, 2021November 18, 2022 by Adminsoft

How to clean the Fargo DTC4500 card printer.

Recommended to clean your Fargo DTC4500 card printer when you change your ribbon. All you need is a Yousite long cleaning card compatible with Fargo DTC4500.

Steps for cleaning Fargo DTC4500:

1: The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer. So please try not to place the printer in a workplace with too much dust or strong sunlight.

2: Regular cleaning of the printer can keep the printer in a better condition, print better quality results, and avoid failures.

3: Before cleaning the printer, please clean the dust around the inside of the printer. And then Clean the card reader ribbon with a cleaning card.

4: Recommended to clean your Fargo DTC4500 card printer when you change your ribbon

If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings.

5: The cleaning of any printer consists of three parts. The cleaning wheel cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine.

Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong its service life of the print head.

Recommended purchasing related cleaning kits.

6: Before cleaning the printer, please use a cleaning stick to clean the dust inside the printer and around the printer (the dust floating inside the printer may be charged with static electricity due to the operation of the cooling fan during the working process of the printer, and it is easy to be adsorbed on the print head and cause broken needle in the print head), and then clean it with the cleaning kit.

7: Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card, and the cleaning effect cannot be achieved.

8: Be careful not to damage the print head when opening or closing the case cover.

9: Do not carry hard objects such as watches and rings when checking the machine, as they are easy to touch and damage the print head.

How to Clean Evolis Card Printer？

Posted on December 17, 2019November 17, 2022 by Adminsoft

Card Printer Cleaning

Yousite provides the following cleaning supplies for cleaning and maintaining Evolis card printers:
1 Cleaning card soaked in 99% absolute alcohol;
2 Foam swabs soaked in 99% absolute alcohol;
3 cleaning wipes.

Compatible with Evolis A5011 Cleaning Kits. Dust and debris can accumulate inside your printer and can potentially cause damage if left uncleaned.

How to clean the Evolis card printer?

Learning how to clean your Evolis card printer is very important. It is recommended to clean your card printer when you change your ribbons.
Steps for cleaning Evolis card printer:
1. First, you need to prepare Yousite cleaning kits compatible with Evolis:1 x cleaning card, and 1 x pre-saturated IPA swab(or cleaning pen), sometimes you may need a cleaning roller.
2. Open the printer lid, and remove the ribbons.

Clean the inside of the printer:

3. Tear the package of the cleaning cards, and put the cleaning card into the hopper.
4. Open the “Print Preferences” window.
5. Select the “Tools” option, and click the “printer Self Cleaning” button.
6. The cleaning card will eject automatically when cleaning is done.

Print head maintenance:

7. Tear the package of cleaning swabs.
8. Gently move the swab side to side across the printhead.
9. Wait two minutes for the printhead to dry.

Cleaning of the cleaning rollers:

Open the upper cover of the printer, take out the cleaning wheel, and use a cleaning rag to remove the dust on the surface of the cleaning rollers.
2 minutes after the cleaning is completed, wait for the cleaning agent to evaporate completely, then reinstall the ribbon and start printing.

10. Reinsert the ribbon spool and close the printer lid.
Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

For more information on card printers, see Card Printers.

We recommend you a professional card printer cleaning card supplier-Shenzhen Yousite Co., Ltd.
To provide you with professional services.