Home » Barcode Printer Cleaning » Page 3

Door Lock and Card Printers

Posted on November 28, 2022May 5, 2023 by Adminsoft

Card Reader Cleaning Card

For all card readers, ATM/POS/Door Locks, and card printers

1. Introduction:

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo, and optic sensors on all types of reader mechanisms. Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up.

Thermal printers, card printers, and thermal printers, are mainly used for cleaning cards, cleaning pens, and cleaning foam swabs to clean up

Pre-saturated CARD READER Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of magnetic heads. We manufacture a wide range of cards designed to clean card readers and printers!

2. Applications:

（1）. All Card Readers;
（2）. ATM/POS Terminals;
（3）. Petroleum Pump;
（4）. Time/Badge;
（5）. Slot/Vending;
（6）. Optical/Barcode;
（7）. Smart Card;
（8）. Thermal Printers.

3. Recommended usage:

Once per week for internal, low-usage card readers once per day for external, or high-usage card readers.

4. Directions:

（1）.insert head cleaning card into the card reader 5-6 times, in the same manner, you would a regular credit card
（2）. Remove and discard
（3）.repeat step 1and 2 if necessary

What Is The Cleaning Card For?

Posted on November 21, 2022May 5, 2023 by Adminsoft

What Is The Cleaning Card For?

The Cleaning Card is essential to the consistent credit card and the debit card reads on your POS Terminal. A credit card has oils and dirt on its surface. With every swipe into your credit card reader, these contaminants are transferred into the card reader and onto the magnetic heads.

This accumulation of dirt and oils is 80% of the reason why these readers fail.

Every time a credit card transaction has manually entered the fees for that transaction are increased by as much as 2%.

The increase in fees and the time it takes for an employee to enter the number manually are essentially eliminated for a fraction of the cost with regular preventive maintenance.

The use of cleaning cards will prolong the life of the reader.

Widely used in various types of card printers, POSE machine card inlet cleaning, hotel access control system cleaning, IC card refueling machine cleaning, automatic ticket machines, etc.

Used in the cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health, and various public places.

It is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

For Credit Card Readers

Designed to thoroughly clean the reading mechanism for credit card readers. A regular preventative maintenance program will eliminate misreads and keep customers happy. Available in both flat and waffle styles.

For Printheads

Designed to remove build-up and contaminants on the thermal printhead within the printer.

When cleaning the card printer, first open the printer to take out the color ribbon, then tear off the packaging bag, and put the cleaning card into the card input box of the printer. Open the printing preferences of the card printer driver, select the Tools tab, and click the Printer Self Cleaning button to clean. The card is automatically ejected after cleaning is completed.

Take out the cleaning swab, squeeze the stick of the cotton swab, and let the liquid flow out to the head of the cotton swab. Use a cotton swab to gently wipe the printer’s print head (wipe in one direction). Wait for the liquid to dry and the cleaning is complete.

Magicard Turbo Cleaning Kit #N9003-564MED. 50 cleaning cards; 3 printhead cleaning pens; For Magicard Turbo printers. All Magicard Printers.

And the static electricity generated by the machine equipment will attract dust to adhere. Those card reader devices will fail to read the card or in case of failure.

Therefore, it is necessary to perform manual maintenance and cleaning from time to time. But simple manual maintenance and cleaning are time-consuming and labor-intensive.

It is also expensive, and the cost performance is very low.

Yousite company has produced a cleaning product, mainly used to clean various card reader equipment. Just insert the cleaning card into the machine equipment, and it can effectively clean the inside of the card reader several times in a row, and clean the card reader. The material is microfiber, which will not cause damage to the inside of the card reader. It is cheap and easy to use. If you have relevant needs, please contact us in time.

Where Is The CR80 Cleaning Card Used?

Posted on November 19, 2022May 5, 2023 by Adminsoft

What is a CR80 cleaning card? How does a cleaning card cleaning affect you? These series of questions are bothering friends who know about the CR80 cleaning card. Yousite is to tell you so that you can fully understand what is cleaning card.

Where can the CR80 cleaning card be used?

The cleaning card cleans the read head and the entire track of a magnetic stripe reader in one pass. The card can be used in the insert, swipe, and motorized readers. Magnetic Card Reader are used extensively in various industries. These readers are a key component in ATMs, POS, Credit Cards, and Insert equipment.

What is a cleaning card?

Cleaning cards safely and easily remove dirt and other contaminants from within these devices without costly outside assistance.
The CR80 cleaning card is rarely introduced on the Internet. The cleaning card was soaked in alcohol. Because of its size, it is the same size as our usual cards, so it is rare in life.

Where is the CR80 cleaning card used?

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

We usually carry key card locks, credit card terminals, POS credit/debit card swipe readers, and ATM card readers. ID cards, bus cards, subway cards, and bank cards with us.

As long as we have these cards, the CR80 can come in handy.

How effective is the cleaning card?

CR80 is mainly used to clean the cleaning card at the entrance.

They are effective in removing lotions, magnetic oxides, dirt, and any other contaminants on your readers.

It can not only easily stick away the dust, but the alcohol is easy to volatilize after cleaning, and it is not easy to leave clean marks.
Yousite Technology is a professional manufacturer of CR80 cleaning cards, welcome to call us for negotiation!

Card Printer And Thermal Printer Cleaning Manual

Posted on November 17, 2022November 17, 2022 by Adminsoft

Card printer and thermal printer cleaning manual

Thermal printers worked by heating up the coating on the label or melting the ink on the ribbon. It can easily build up contaminants on the printer head, leading to poor printing. In the printing process of card printers, it will leave some ink, and residue on the transfer roller and cleaning roller. So regularly cleaning your thermal printers and card printers can prolong the life of your printer and improve the print quantity.
There are so many items of card printers and thermal printers, if you are confused about how to choose the cleaning products, then this article may be helpful for you.

Below are four categories of printer cleaning products.

1. Cleaning card

It can be divided into two categories according to the usage: card printer cleaning card and thermal printer cleaning card.
card printer cleaning card includes a CR80 cleaning card and a long cleaning card. CR80 cleaning card can be used on all card printers, ATMs and POS.

A long cleaning card must be used on the corresponding card printer item.

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

For instance, the size of the Zebra P330i T-Long card is 76*330*0.711mm. The thermal printer cleaning card is thinner and softer, it can be used on the thermal print head. You should choose it according to the width of the print head. Similarly, thermal printer cleaning cards can also be used on currency counters and bill scanners.

2. Adhesive cleaning card and Adhesive cleaning roller.

Card printer and thermal printer cleaning manual

Many printers contain a cleaning roller to clean the card before it prints. After you print a number of cards, the stickiness will reduce, you should change the new adhesive cleaning roller then.

The adhesive cleaning card is mainly used to clean the dust on the transfer roller and adhesive roller. Adhesive cleaning cards and adhesive cleaning rollers can only be used on card printers.

3. Cleaning swabs and cleaning pen.

Cleaning swabs and cleaning pens can be used on the print head of card printers and thermal printers. The cleaning swab is disposable and the cleaning pen can use a few times, you can change the pen head if it is very dirty.

4. Cleaning wipes.

A cleaning wipe is used to clean the transfer roller and the cover of the printer. It can also be used on the thermal print head, but you have to make sure the printer is power off before cleaning.
More cleaning methods and cleaning product information. Beck@yaostbio.com

Multi-function Cleaning Wipe -IPA

Posted on November 17, 2022November 18, 2022 by Adminsoft

IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

Multi-function cleaning wipe -IPA

The use of cleaning wipes is very wide, not only can be used for card printers, and thermal printers to wipe the print head, machine body,
but also can be used to wipe the phone, computer screens, and so on.

In addition to cleaning can also be used for the above places can also be used for a lot of places clean wipes.

Multi-function cleaning wipes.

IPA-M3 size: 127mm * 152mm.

containing 99.9% IPA solution, the use of tin foil bags (to avoid IPA volatile) independent packaging.

Store in a cool place, with a shelf life of 2-3 years.

Yousite is the direct manufacturer of clean wipes, clean wipes production is made by hand.

Each process has professional monitoring and control and strives to do all excellent products.

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable)

Posted on November 17, 2022November 17, 2022 by Adminsoft

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable).

IPA-4.5 Snap swab – 4.5″. Pre-saturated IPA Snap Swab(3″/4.5″ are available). The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

Simply Squeeze or Snap the Plastic Handle and the Foam Head becomes saturated with just the right amount of Cleaning Solution.

Clean the Thermal Print Head by using a back & fourth motion to effectively remove dirt and debris accumulated on the print head thus extending the life of the print head and maintaining a readable image.

Thermal Printer Pre-saturated IPA Cleaning Swab

Lint free, non-abrasive, and pre-saturated with 99.7% IPA (isopropyl alcohol), the foam tips will thoroughly but gently clean delicate parts.

Available in 2 Sizes: 3.0” or 4.5”
Packing: 25 Swabs per Ziplock Bag; 50 Swabs/Box
Part Number: IPASS-3.0 and
Part Number: IPASS-4.5 respectively.

Features:

100 PPI, Open Cell Polyurethane Rectangular Foam Tipped. Non-Abrasive.
Typical Applications: Computer Keyboards. Optical and Magnetic Head Devices. Electronic Components.

Thermal Printer Pre-saturated IPA Cleaning Swab

Posted on November 17, 2022November 17, 2022 by Adminsoft

Thermal Printer Pre-saturated IPA Cleaning Swab

Specifications

-isopropyl alcohol clean swab;
-.Single packed;
-.For ZXP3/7/8, P330i, P330m & P430i printers;
-.NO MOQ;

-FREE SAMPLES

1. Put Quality as the first consideration;
2. Rich export experience of more than 10 years in manufacturing and selling cleanroom and esd products.
3. OEM & ODM, customized design/logo/brand and packaging are acceptable.
4. Advanced production equipment, strict quality testing, and control system to make sure superior quality.
5. Competitive price: we are a professional cleanroom/ESD products manufacturer in China, there is no middleman’s profit,
and you can get the most reasonable price from us.
6. Good quality: We have ISO certification, good quality can be guaranteed, and it will help you keep the market share well.
7. Fast delivery time: we have our own factory, which saves your time to discussing with the trading company, we will try our best to meet your request.

IPA Snap Swab

Posted on November 17, 2022November 24, 2022 by Adminsoft

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to kill bacteria & viruses · Disinfects small & difficult to reach electronics.

IPA alcohol cleaning swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

SNAP Swabs 4.5″ IPA Filled Reservoir Handle (50 swabs)TDS Download

1. For cleaning contaminants from printers
2. 2-3ml 99.9% IPA solution
3. Aluminium Foil Packing

Description

Evolis A5003 Cleaning kit IPA Self-saturated alcohol foam swab. Includes 25 cleaning swabs with a spatula foam tip and isopropanol;

Yousite IPA Snap Swabs are specially designed for cleaning effectively dirt, magnetic oxides, oils, debris,
lotions and other contaminants from all kinds of ID card printers, scanners, readers, and barcoders.
It is a cost-effective way to maintain your card readers and increase the span life of the magnetic heads.
IPA snap swab is one of our card reader Cleaning kits products which also contains cleaning cards,
adhesive cleaning tacky rollers, IPA wipes, and cleaning pens for all kinds of different printers such as Zebra, Magicard, Fargo, Datacard, Evolis, EDI, etc.

Features

Cleaning Card

-Excellent absorbency than the 100%polyester cleaning card.

Electronic-grade IPA Snap Swab.

-Easy, Effective, and Safety.

Aluminum Foil.

-Strong tightness and keep it longer.

Hot-press compound.

-Make sure the most excellent cleaning effect.

Present IPA wipes.

-preventive maintenance for your printer.

Thermal Printer Head Cleaning Pen 99% IPA Solution

Posted on November 16, 2022June 23, 2023 by Adminsoft

The IPA cleaning pen is specially used to clean the thermal print head of all thermal printers, including card printers, barcode printers, label printers, receipt printers, Kiosk printers. It is used to remove ink, dirt, and contamination built up on a thermal printer’s print head.

How do you use a thermal printer cleaning pen?

To clean thermal print heads, swipe the cleaning pen across the entire print head surface. Adding a little pressure as you move the pen across the print head will gently scrub off the burnt-on particles. Repeat if necessary. To clean the pen tip, wipe across the clean paper surface.

【1】.Products Description Cleaning Pen

IPA Printhead Cleaning Pen Holder is filled with 99.9% electronic grade IPA solution.

A.Cleaning pens prolong equipment life and reduce maintenance costs. They remove contaminates from transaction equipment, which have been proven when used regularly they save money.
B.Regular Cleaning extends the service life of the print head and provides a better graphic image quality.

How to Use Thermal Printer Cleaning Pen?

Watch this video on YouTube

99% IPA Solution Thermal Printer Head Cleaning Pen

【2】.Technical Specification

1. Barrel Length: 143mm;
2.Packing:12 pieces per box;
3. Barrel Diameter: 14.3mm;
4. IPA Volume : 5.0 +/- 0.5 ml;
5. Printhead, PCB, IC, SMC, etc.

IPA cleaning pen is a reusable option for cleaning the thermal print head, each pen can be used 6 to 10 times. After each use, you can scrape the nib on a white clean paper to remove the ink residue on the nib for reuse next time.

【3】.Products Application

All ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print Heads.
All types of thermal printers.
Brand ID card printers: Zebra, Fargo, Magicard, Evolis, etc.
Pcb, IC, cleaning fields.

Used for Routine Preventive Maintenance Cleaning on all types of ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print heads.

99% IPA Solution Thermal Printer Head Cleaning Pen Kits

【4】.Directions

1. To clean the pen tip, wipe across the clean paper surface. Recommended usage is every time a new roll of labels or thermal is needed OR to correct lines or imperfections in the printed copy
2. Repeat if necessary.
3. To clean thermal print heads, swipe the cleaning pen across the entire print head surface.

Evolis Badgy100 Card Printer Cleaning

Posted on October 11, 2022February 11, 2023 by Adminsoft

The Evolis Badgy100 card printer prompts for cleaning.

Recently, a customer consulted. The Badgy100 card printer cannot print normally during use.

The monitor program of the printer prompts for cleaning (as shown in the figure below).

Use the cleaning card to clean the printer in time.

The regular cleaning and maintenance of the machine is conducive to the normal use of the printer.

If it is not cleaned in time, the printer may not be able to work normally!

Printer print head with cleaning swabs; The card printer itself with pre-saturated cleaning cards; The cleaning rollers with pre-saturated cleaning lint-free wipes.