Madica M315S card printer cleaning

Posted on November 11, 2021February 11, 2023 by Adminsoft

Madica M315S card printer cleaning and maintenance

In order to better maintain the machine, please clean the machine in time.

Use a cleaning card to clean the color ribbon after a roll of ribbon is used up.

Clean the black belt with a cleaning card in time after printing 500 cards. If the machine is used in a dusty environment, it is recommended to increase the frequency of cleaning with the cleaning card.

1. Use a cleaning pen to clean the print head of the machine when the power is off.

2. The blue cleaning wheel rubber roller in the machine can be taken out frequently and rinsed on the faucet. After the water stains are dry, put it back into the machine. Note that the cleaning wheel rubber roller must be pressed down in place.

3. Use of machine cleaning card :

1) Take out the card from the card feeding box of the machine, take out the ribbon and cover the machine cover.

2) Press and hold the two buttons EJECT and RIBBON SET on the machine panel at the same time to enter the machine menu page: (EJECT on the machine panel: short press – move up, long press – exit or return to the previous level RIBBON SET: short press – move down, long press – confirm or enter the next level)

3) Long press RIBBON SET to enter the menu

4) Select 1.DIAGNOSIS, long press RIBBON SET to enter

5) Unpack the cleaning card, put the cleaning card into the card slot, select 2.CLEAN MODE and press RIBBON SET for a long time to confirm, the machine will clean automatically. (If the cleaning card is cleaned once, you can continue to clean it several times. When the cleaning solution on the cleaning card dries up, the cleaning card can no longer be used, and a new cleaning card needs to be replaced).

Transport Rollers Cleaning Card

Posted on August 19, 2021May 5, 2023 by Adminsoft

Transport Rollers Cleaning Card

For use with all Evolis card printers · For the cleaning of card transport rollers · Pre-saturated cleaning cards packaged in an individual tear-open pouch.
The subway is a city’s emerging traffic tool, carrying millions of flows daily. Subway cards as carrier material to take the subway, which greatly improves the convenience of people’s travel. However, due to the metro card carrying a lot of dust, the credit card for a long time will cause the card slot card the accumulation of large amounts of dust, affecting the efficiency of a passenger car.

Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.

These double-sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides, and other contaminants that build up on magnetic and optic reader heads. They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.

Facing this problem, how to solve it?

Yousite’s cleaning card can easily dispose of this puzzle. We are specializing in the production of cleaning cards, cleaning swabs, and cleaning kit manufacturers, for the subway card slot that is easy to dirty, and we are also through continuous testing, making our cleaning cards more easily, and more suitable for all subway stations. When the cleaning card slot is, you can first use our cleaning card clean, and then use a clean foam swab to erase the dust around the corner. If some induction card readers, don’t put try our cleaning cloth, the effect is very good.
In addition, ticket machines, and vending machines in the subway is also can clean our products, if there are good cooperation intentions, may wish to discuss cooperation with Yousite. technology!

Dollor Bill Validator/acceptor Cleaning Cards

Posted on April 5, 2021December 5, 2022 by Adminsoft

Dollor Bill Validator/acceptor Cleaning Cards

Dollor Bill Validator/acceptor Cleaning Cards work in all bill validators and readers regardless of manufacturer or model. They remove deposits dirty bills leave on read heads and rollers, and keep money flowing through your bill validators, readers, and currency handling equipment.

These disposable Dollor Bill Validator/acceptor Cleaning Cards: Designed to safely and effectively remove all dirt, magnetic oxides and other contaminants from all types of concealed magnetic heads, photo and optic sensors on all types of reader mechanisms.

We’ve tried many cleaning cards in the past and this is by far the best! This card effectively cleans the internal components of your bill acceptor without damaging its belts and rollers.

After purchasing self-service vending machines, many customers don’t pay attention to maintaining the equipment at all, which leads to the failure of the equipment to deposit money normally after using it for a period of time.

Most equipment manufacturers will not inform customers to do a good job of maintenance, because they can provide maintenance services because of equipment problems, which should increase the company’s income.

If the above phenomenon of not being able to feed banknotes occurs, it is recommended that you use our banknote validator cleaning card to remove stains and dust on the delivery rollers.
The following is the card after our customer cleaned the banknote validator.

There is an obvious black area on it.

Thermal Printer and Check Scanner Cleaning Card

We can provide various sizes to fit most the thermal printer type. Cleaning cards, ATM/POS terminals cleaning cards Card Reader.

Zebra ZC100 Card Printer Does Not Feed The Card?

Posted on March 10, 2021February 11, 2023 by Adminsoft

ZEBRA ZC100 card printer does not feed the card, how to solve the problem of card jam?

Recently, when a customer was using the ZC100 printer, it was prompted that the card feed was blocked, and the printer would not feed the card. The customer used the cleaning card to clean and maintain the printer. After the cleaning was completed, the printer could print a few pages or a few days normally.

From time to time, the same error of not feeding the card appears again. In this case, the cleaning operation again cannot solve the problem of the card feeding blockage. We think that the card feeding wheel of the machine has been used for a long time and is too worn, so the card feeding wheel needs to be replaced ,

(1) Remove the card feed rollers of the printer, confirm that it is too worn, and replace it.

(2) Replace the card feed rollers with a new one, the problem of card feed jam is solved, and the printer can be used normally.

(3) Replace it and install it on the card feeding assembly of the printer.