How To Clean Zebra ZXP Series 3 Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

Help maintain card printer performance and reliability · Prolong the life of vital printheads, transport rollers, and magnetic encoder parts.

How to clean Zebra ZXP Series 3 card printer?

When the printer LCD display “clean printer” or the print quality is bad, it’s time to clean your ZXP 3 card printer. Then you need ZXP 1 & ZXP 3 series printer cleaning kits which include:

4 Print engine cleaning cards and 4 Feeder cleaning cards.

Zebra 105999-101/105999-301/105999-302 Cleaning Kits

Zebra 105999-101/105999-301/105999-302 printer cleaning card kit includes four print engine cleaning cards and four feeder cleaning cards. For Zebra ZC Series Printers

1. With the printer powered on and the LCD display showing ready hold down the control button for five seconds, then follow the LCD instructions.

2. Open the printer lid, remove the ribbon, and closed the lid.

3. Now the LCD will display “empty feeder then close cover”. Open the card feeder cover, remove the cards and close the cover.

4. Insert the long cleaning card into the manual card feeds slot. Wait for the cleaning process to complete.

5. When the cleaning process is completed, the cleaning card will be ejected.

6. Open the card feeder cover and insert the feeder cleaning card into the card feeds slot. Close the card feeder cover. Wait for the cleaning process to complete.

7. When the cleaning process is completed, the LCD will display “remove feeder cleaning card”, open the card feeder cover and remove the cleaning card.

8. The cleaning process has been completed. The LCD will display “cleaning done”.

9. Load the cards and close the card feeder cover. Open the printer lid, install the ribbon, and close the lid.

Universal Cleaning Card For All Card Reader

Posted on July 12, 2022May 5, 2023 by Adminsoft

The card printer cleaning card is very important to the maintenance of the card equipment. Generally, during the printing process, the equipment itself must be cleaned after a fixed number of finished products are printed.

Generally, there are 54*86mm soaked IPA cleaning cards, 3M sticky cleaning cards, and T-type or I-type long cards for overall cleaning of the transmission wheel.

CR80 Universal Cleaning Card

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

CR80 Card Reader Cleaning Card has a wide range of uses, and can be used for cleaning ATM machines, POS machines, subway top-up machines, thermal punch-in machines, card readers, hotel access control systems, top-up machines, gas station IC cards and other products.

These machines will be insensitive to card reading during frequent use, because they are affected by dust, particles and other pollutants. Many people in U.S. still use the oldest cleaning method. Professional maintenance personnel open the machine for maintenance, and the maintenance cost is very high. , Some even directly replace the system that cannot read the card, which causes a very high cost.

The cleaning card solves the maintenance troubles of non-professionals. It can quickly remove dust and other pollutants from the machine, save time and effort, and bring the machine back to life when the machine fails. It is a good product and has a future. The market for cleaning cards and cleaning kits in foreign countries is very large. There are still some concepts that have not changed. Most people are professionals to maintain and clean with a brush, which is easy to cause damage to the sensitive read-write head, and the gain outweighs the gain.

But now many manufacturers of card machines are beginning to realize this, and more and more people will rely on cleaning cards, making the cleaning cards fully functional!

In order to improve the cleaning effect, our cleaning cards are generally soaked in IPA solution, which not only can quickly remove the dust, but also evaporates quickly, and there will be no residual substances attached to the equipment.

Card Printer Cleaning Roller

Posted on February 12, 2022December 12, 2022 by Adminsoft

Card Printer Cleaning Roller

The card printer cleaning wheel is a product specially designed to clean the card when producing the card. Put the cleaning wheel into your printer, the cleaning wheel will absorb the dust particles on the card during printing, which will prolong the life of your print head and improve the quality of your card punching.

It is highly recommended to perform a printer cleaning every time the ribbon is replaced. In addition to using the cleaning card to clean the card channel, each cleaning also includes replacing the card cleaning roller.

Watch out for a lot of dust particles on your cleaning wheel, or clean it after every 250 cards printed.

Note your printer model, it may have one or two cleaning rollers.

Instructions:

1. Open the top cover of the machine.

2. Remove the ribbon and printer cleaning roller from the printer.

3. Locate and remove the cleaning roller between the two ribbon drive rollers.

4. Peel off a layer of thin paper on the cleaning card, attach the cleaning card to the cleaning wheel and drag the cleaning card overturned to make it absorb the dirt and dust on the cleaning wheel to the cleaning card.

Rio Pro Card Printer Cleaning

Posted on January 17, 2021November 17, 2022 by Adminsoft

Printer cleaning consists of three parts. The cleaning rollers clean the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine.

Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong its service life of the print head. It is recommended to purchase related cleaning kits.

Rio Pro Card Printer Cleaning

To keep your Rio Pro working properly, you should clean the printer every time you change the dye film ribbon.
To do this, you need a Rio Pro turned on, a new cleaning card, and a cleaning pen as well as the new Cleaning Roller Assembly.

Magicard M9005-761 Card Printer Cleaning Kit 10 T-Type Long Card, 1 Cleaning Pen, 5 Cleaning Rollers. For the Magicard Rio, Tango and Avalon printers.

Steps for cleaning Rio Pro:

It is recommended to use a cleaning card to clean all the spindles in the machine and replace the cleaning rollers after each roll of ribbon is used. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings.

1. First, remove the card hopper and open the printer to remove the dye film ribbon and the blue sticky roller underneath it. Remove the metal bar from this blue roller, and set it aside in a safe place.
2. Use the menu on the front of the printer and navigate to the cleaning rollers option. Use the keys to work through the guidance messages ensuring your printer is ready for cleaning.
3. Open the pouch containing the new cleaning card and remove the card. Select “yes” on the printer, and insert the cleaning card. While the card is in the printer, the parts left by the printing process are removed with the alcohol in the card.
4. Flipping the card and repeating this process at least two to four times in order to get everything really clean. The cleaning process takes only a few seconds, and when it’s done you can clearly see the result.
5. Sometimes the Rio Pro’s rollers may be really dirty. In this case, you need to manually clean. Leave the automatic clean mode, and select move card from the main menu.
6. For the cleaning card in half, press it onto the main middle roller while holding down one of the move card buttons. Move the cleaning card back and forth for around 15 to 20 seconds. You can clearly see the dirt and debris removed by this process.
7. You may also wish to clean the Rio intake roller. Turn the printer around and pulled the upward move card button while pressing the cleaning card onto the Rio roller for 15 to 20 seconds. Again, this cleaning process leaves a clear result.
8. Finally, it is important to clean the printhead on the Rio pro. Gently move the pen across the printhead to remove any dust or residue.
9. After cleaning you’ll install a new sticky roller to the printer. Remove the roller from the dye film box, and insert the metal bar which you set aside earlier. Unwrap the roller and snap it into place directly above the orange roller towards the back of the unit. Removed the new roller dye film from the box and unwrap it. Place the dye film into the printer.
10. Gently close the lid of the printer and replace the card hopper in the back of the unit.
Your Rio Pro is clean and ready to print.