Cleaning Cycle For Datacard CP40, CP60 and CP80 Card Printer

Posted on November 17, 2022May 5, 2023 by Adminsoft

Cleaning cycle for Datacard CP40, CP60, and CP80 card printer.

Datacard CP40, CP60, and CP80 series card printers need to clean regularly. It is recommended to clean before a ribbon change or the print quality is poor. You need to prepare Yousite cleaning kits compatible with Datacard: 1 x CR80 cleaning card, and 1 x cleaning sleeve.

Entrust Datacard SP25/35/55/75/CP40/CP60/CP80 Plus Series Cleaning Supplies.

Cleaning The Printer. Run a cleaning card and change the cleaning sleeve when changing the print ribbon.

Then run the cleaning cycle as follow:

1.    Open the printer cover, remove the print ribbon cartridge and remove the cleaning roller.
2.    Remove the blank card stock from the input hopper.
3.    Open the cleaning card package and remove the cleaning card.
4.    Insert the cleaning card into the printer.
5.    Select the “Cleaning Card” option and press the “enter” button.
6.    When the cleaning cycle has been completed, replace the ribbon, replace the cleaning sleeve, and remove the protective paper, then place it back in the printer.
7.    Close the cover and you are ready to print.
For more cleaning kits information. Email(beck): beck@yaostbio.com

How To Clean The Zebra P330i Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

How to clean a zebra p330i card printer?

After printing 1000 color cards or 5000 monochrome cards, the Zebra P330i LCD will display “cleaning printer”.

And you should clean the printer as soon as possible to ensure good print results.

Then this is a problem, how to clean the Zebra P330i card printer?

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

Steps for cleaning Zebra P330i:

1. Leaving the printer on, press and hold the button for three seconds, the LCD will now display “remove ribbon then close head”,

2. Open the printer lid, lift up the print head carriage then remove the ribbon spools and close the print head carriage. After the ribbon is removed, the LCD will display “MD feeder, and press the button”.

3. Open the card feeder lid and remove all but the bottom card. This card should remain in the feeder until you press the button to eject it from the printer. Do not attempt to pull the card out, or you may damage the feeder.

After the card is removed, the LCD will display” load cleaning card in feeder”.

4. Remove the small cleaning card from its packaging and place it in the car feeder, the feeder belt will move the cleaning card halfway into the feeder.

This is the correct position, do not try to force the card fully into the printer. Once the card cleans the feed belt, it will move through the printer and continue cleaning other components, the LCD will display “cleaning printer” during this process.

After the cleaning card is finished, it will automatically be ejected, the LCD will then display “press button to continue”.

5. Remove the long cleaning card from its packaging, press the button and the message will change to “feed long cleaning card into exit”. Now insert the long cleaning card into the printer exit slot, the long cleaning card will automatically move back and forth as it cleans. The LCD will again display “cleaning printer” during this process.

6. Once the long cleaning card has been ejected, the LCD will change to “ready”. Now you can reinsert the ribbon spools, reload cards and resume printing if you still see spots in your cards after cleaning the printer, you may want to clean the printhead to remove deposits.

7. Before cleaning the print head, turn the printer off, lift the carriage and remove the print ribbon. Then squeeze the plastic stick on the cleaning swab to push the liquid into the tip, now gently move the moistened swap side to side across the printhead elements.

8. Wait two minutes for the print head to dry. Turn the printer back on, and reinsert the ribbon spools.

Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

Evolis Badgy100 Card Printer Cleaning

Posted on October 11, 2022February 11, 2023 by Adminsoft

The Evolis Badgy100 card printer prompts for cleaning.

Recently, a customer consulted. The Badgy100 card printer cannot print normally during use.

The monitor program of the printer prompts for cleaning (as shown in the figure below).

Use the cleaning card to clean the printer in time.

The regular cleaning and maintenance of the machine is conducive to the normal use of the printer.

If it is not cleaned in time, the printer may not be able to work normally!

Printer print head with cleaning swabs; The card printer itself with pre-saturated cleaning cards; The cleaning rollers with pre-saturated cleaning lint-free wipes.

Card Reader Cleaning Card Kits

Posted on April 12, 2022May 5, 2023 by Adminsoft

Yousite company card reader cleaning card set

Yousite company card reader cleaning card is a cleaning card product specially designed to clean the magnetic strips inside various card readers.

Nowadays, various mobile ATMs and large supermarkets have credit card machines and related magnetic card reading devices, which bring great convenience to our daily trading and financial activities. But maintenance of any device after use is crucial.

It will not cause corrosion or damage to the magnetic strip inside the card reader. Wear and tear will affect the service life of the instrument. At the same time, the Yousite card reader machine cleaning card is easy to use, just open the package, insert the ATM cleaning card soaked in solvent into the ATM or poss machine multiple times, and it can be cleaned and used many times.

Professional card printer cleaning kit manufacturer

Yousite company is a professional manufacturer of card printer cleaning kits, especially brand card printer compatible cleaning kits: Zebra, Evolis, Datacard, Fargo, Magicard, etc.

The cleaning kit includes: cleaning cards, cleaning swabs, cleaning wipes, cleaning pens, sticky cleaning cards, sticky cleaning rollers, and more.

Choose suitable cleaning products according to the brand, model and style of the machine. If you are not sure what products to use on your machine, just contact us and we will tell you which cleaning products to use and how to use them. We have rich experience and technology, so you can’t go wrong choosing us.

Card Printer Cleaning Roller

Posted on February 12, 2022December 12, 2022 by Adminsoft

Card Printer Cleaning Roller

The card printer cleaning wheel is a product specially designed to clean the card when producing the card. Put the cleaning wheel into your printer, the cleaning wheel will absorb the dust particles on the card during printing, which will prolong the life of your print head and improve the quality of your card punching.

It is highly recommended to perform a printer cleaning every time the ribbon is replaced. In addition to using the cleaning card to clean the card channel, each cleaning also includes replacing the card cleaning roller.

Watch out for a lot of dust particles on your cleaning wheel, or clean it after every 250 cards printed.

Note your printer model, it may have one or two cleaning rollers.

Instructions:

1. Open the top cover of the machine.

2. Remove the ribbon and printer cleaning roller from the printer.

3. Locate and remove the cleaning roller between the two ribbon drive rollers.

4. Peel off a layer of thin paper on the cleaning card, attach the cleaning card to the cleaning wheel and drag the cleaning card overturned to make it absorb the dirt and dust on the cleaning wheel to the cleaning card.

HiTi CS-220E Card Printer Ribbon not Detected

Posted on February 11, 2022February 11, 2023 by Adminsoft

HiTi developed the CS-220E card printer and reported that the ribbon was not detected when it was powered on

HiTi card printer CS-220E reports 0201 No ribbon detected when the machine is turned on.

If this error occurs, the machine failure can be eliminated from the following points.

1. Check whether the ribbon is installed in the machine, if not, please install the ribbon correctly.

2. Whether the ribbon in the machine is installed correctly, if the ribbon is installed incorrectly, please install the ribbon correctly.

3. The ribbon in the machine is broken, connect the broken part, stick it with tape, and reinstall the ribbon correctly.

4. You can calibrate the sensor for the machine in the printing preferences.

If the machine still reports an error after eliminating the above points, please contact our technical department in time!

Yousite company offers many OEM cleaning card solutions to suit your needs, including private label cleaning card.We are producing card printer cleaning kits and supplying all major brands Manufacturer of a full range of cleaning supplies. We can customize and produce standard size IPA according to customer’s requirements Soak cleaning card, sticky rollers, sticky card, IPA cleaning pen and IPA cleaning cloth

Thermal ID Card Printer Cleaning Cards

Posted on December 6, 2021May 5, 2023 by Adminsoft

Thermal ID Card Printer Cleaning Cards

Cleaning your printer is an easy way to help maintain optimal printing performance and quality.
Cards carry debris through the printer’s internal print path that can potentially degrade your image
quality, and damage your printhead or other critical parts of your card printer. With routine cleanings
and replacement of cleaning rollers, you can expect optimal image quality and a longer life for your card printer.

Product Description

Product Name	ID Card Printers Cleaning Card CR80 Cleaning Card
P/N	CR80 cleaning card
Size	85mm x 54mm x 0.711mm
Package	50pcs/bag, 50bags/carton

ID Card Printer Reader Cleans ATM Magnetic Head cleaning card

These double sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides and other contaminants that build up on magnetic and optic reader heads. They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.
Presaturated magnetic head cleaning cards.
Presaturated cards instantly clean heads on point-of-sale credit card readers, access control/ID card readers and all open systems.
Just swipe to clean.
The individually packed cards are non-abrasive and incredibly easy to use.

Features

-Blending spunlace,polyester,cellulose and PVC card.
-Better absorbency than other 100% cleaning card.
-Strong adhesivess.
-No polluted by contaminants
-Electronic-grade IPA
-Safety,Effective,Easy
-Aluminium foil packing make it have strong tightness and keep longer time.

Applications:

Credit Card Readers
Vending Machines
ATM / POS Terminal
Hotel Door Locks
Gas Station Equipment
Pay Phones
And many other applications

We have 3 cleaing cards:ATM cleaning cards,card reader/encoder cleaning card;printer cleaning card

Have You Cleaned Your Card Printer?

Posted on November 17, 2019November 17, 2022 by Adminsoft

How often do you clean your card printer? Which brand you are using? Evolis, Magicard or Datacard ?

Do you remember when was the last time you cleaned your card printer? If not, you should pay more attention to your printer cleaning.

Many card printers contain a cleaning system to clean card when it is printing. But the components very easy to attract dust and debris as plastic cards have a high static charge. So if you have not cleaned your card printer regularly, it will reduce the quality of the print, resulting in fuzzy images.

It takes you just a short time and a few steps to do the cleaning job.

Have You Cleaned Your Card Printer?

Here are three basic steps:

1. Remove the ribbon.

2. Insert the cleaning card into the feeder.

3. Put back the ribbon.

Where do you get the printer cleaning kits?

Yousite provides various cleaning kits compatible with most hot brands in the market, such as Evolis, Magicard, Datacard, and many more. Click here for more information about Yousite cleaning kits.

How often should you clean your printer?

If you are using color ribbons, it is the best time to perform a cleaning cycle when you change your ribbon. When you use monochrome ribbons, you can perform a cleaning cycle per week or per month depending on the usage frequency of printing. It is recommended to set the firmware prompt to approximately every 250 cards.

If there are unprinted lines on the card printed, you should clean the printhead. We supply thermal printer cleaning pens and cleaning swabs to effectively clean the contaminant build-up on the printhead. If unprinted lines still exist, they may have permanent damage to your printhead. You will have to replace it.

Clean your printer regularly to prevent jams or other minor issues by using the automatic cleaning feature that’s available on most printers. Manually clean the paper rollers with a damp cloth to remove dirt and debris.

So if you want to buy any cleaning products for card printer cleanings, such as cleaning pens, cleaning swabs, cleaning wipes, or cleaning kits, please just feel free to contact us!