Card Reader Plastic Cleaning Card

Posted on December 1, 2022June 23, 2023 by Adminsoft

ATM/Card Reader Cleaning Card CR80

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo and optic sensors on all types of reader mechanisms.
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up.

Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.

Pre-saturated ATM/ CARD READER Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads
Individually packaged Non-abrasive Safe on plastics Fast evaporation Card Reader / ATM cleaning card All Card Readers ATM/POS Terminals Petroleum Pump Time/Badge Slot/Vending Optical/Barcode Smart Card

How to use card printer cleaning card

1. Required cleaning tools

Magicard M9005-761 Card Printer Cleaning Kit 10 T-Type Long Card, 1 Cleaning Pen, 5 Cleaning Rollers. For the Magicard Rio, Tango and Avalon printers.

1. Cleaning card 2. IPA Cleaning swab 3. Cleaning rollers.

2. Use of cleaning tools

1. First open the printer and take out the ribbon.

2. Tear off the packing bag and put the cleaning card into the card input box of the printer.

3. Open the card printer driver’s properties -> device settings.

4. Select the Tools tab, and click Printer

6. Take out the cleaning cotton swab, squeeze the cotton swab stick, and let the liquid flow out to the head of the cotton swab.

7. Use a cotton swab to gently wipe the print head of the printer (wipe in one direction).

The Fargo 081518 cleaning kit includes everything you need to clean the inside of your Fargo DTC printer to keep it working optimally.

8. Wait for the liquid to dry and the body cleaning is complete.

3. Replace the cleaning rubber rollers. It’s roughly like this. If you want to see a specific and clear introduction, you can go to Beijing Fagao Sunshine. They have a clear explanation of the card machine with pictures, which is very clear and easy to understand.

Card Printer Tutorial

If you want to print hard cards, you may need a dedicated card printer to print hard cards.

How to print the credit card machine

first step:

Long press the on/off button of the credit card machine to turn it on. Some card machines have an account number and password, and you need to enter the password to sign in before you can use it.

Step two:

Press the “Confirm” button on the card reader, and then the card reader will enter the menu page, which will generally display: “1. Consumption; 2. Balance inquiry; 3. Cancellation; 4. Sign in; 5. Print; 6. Management; 7. Other” options.

third step:

We use it when we use the credit card machine for consumption, so we can press the “1 key” to select “Consumption”.

the fourth step:

Insert the IC card, if the card does not have a chip, just swipe the card directly in the card slot of the card reader. After the card is swiped successfully, the card number will be displayed on the screen of the card reader, just press “Confirm” after checking.

the fifth step:

That is to say, if the amount you swipe your card is 100, you have to enter 10000 on the credit card machine.

Step six:

After entering the amount, enter the transaction password of the card, confirm that the password is correct, and press the “Confirm” button, and the card reader will successfully swipe the card.

How does the printer swipe the card to print?

Supplement: If you have opened a telephone banking service, you can also complete it through telephone consultation.

How to use the card printer

Card printer consumables have a number of sheets. One set can print 1,000 single-sided cards. In fact, the number of printed cards may be less than 1,000, so budget your own consumables according to your punching volume.

How to clean the card printer

1. Make sure that the power of our printer is turned on.

2. Go back to the computer connected to the printer and click the “Start” menu on the desktop. Then you can see the “Devices and Printers” option in the start menu, click it.

3. After entering the device interface, we can see our printer. Find the printer we want to clean and click the right mouse button, you can see “Printer Properties” in the pop-up menu bar, click it.

4. After entering the printer properties interface, we can find the “Maintenance” option in the interface and click it.

5. In the maintenance interface, we can see the “cleaning” option, click it.

6. After that, an interface will pop up, click the “Execute” option on it.

7. Finally, an interface will pop up saying that our printer is cleaning, just click OK.

How to use the printer cleaning card

1. Click Start in the lower-left corner of the computer. Select Printers and Devices, select the printer driver icon, and what you need to click here is Printing Preferences.

Click the application tool tab, first perform the nozzle inspection on the upper left, at this time the printer will print a piece of paper with a slanted mesh image on it, you can easily see if there are broken lines or incomplete places, if so, you need to Perform nozzle cleaning, which is the second button from the upper left.

How to use the card printer cleaning card

1. Ribbon deviation occurs during printing

The main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor quality of the ribbon cutting.

2. The printing is not clear and the quality is poor

There may be the following reasons:

1. The temperature of the print head is too low or the print density is too light
. 2. The print head is not installed correctly

3. There is always a shallow thin line on the label printed by the printer

If your printer has such a problem, it proves that you have not done enough to maintain the printer.

When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.

If the printer punches a card and there is a large area of the card that is not printed, there are two possibilities:

1. The print head is seriously damaged. 2. The data cable of the print head is damaged. If this happens to your printer, please contact our engineers to confirm the damaged part and repair method.

The damage of the print head is irreparable. In this case, only a new print head can be replaced.

The way to avoid this situation is: 1. Pay attention to cleaning the printer regularly. 2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions). 3. Be careful not to touch the print head when opening or closing the case cover. 4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).

If your print head is damaged, you will need to purchase a new print head to replace it.

4. Occasionally, some spots will appear on the label printed by the printer

If there are some spots on your printed cards, it is because your printer has accumulated dust and needs to be cleaned in time. It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage.

If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head.

The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (it is best to wipe each card with an eye cloth before printing), so that the printed card will not be flawed.

5. How to solve the problem of ribbon wrinkling

Reason:

1.
2 Temperature setting is incorrect;
3 Printhead pressure and balance are not set correctly;
4 Media is not set correctly for the feed;

Solution:

1 Reinstall the medium correctly
2 Adjust the printing temperature to meet the printing requirements as much as possible
3 Reset the minimum pressure required for printing
4 Reset the correct paper feeding amount of the medium

6. Why does the ribbon “stick” to the cloth label?

When the barcode machine is printing the cloth label (tape), some types of barcode machines will have the carbon tape and the cloth label stick together.

Let’s take a look at how the carbon ribbon and the cloth label are glued together:

The thermal transfer barcode machine is like a hot stamping machine, except that the hot stamping machine uses gold paper, while the barcode machine uses carbon ribbons. They are all one material that is attached to another material through high temperature. If the printed material is melted at this temperature, it will stick to the carbon ribbon or gold paper.

After clarifying this relationship, we can lower the temperature of the hot spot of the printing hair of the bar code machine or reduce the pressure of the printing head, which can prevent the ribbon from sticking to the cloth label, but sometimes this method is not It is suitable for any barcode machine (low-end barcode machine). At this time, they can pull the cloth label when printing the cloth label (remember to pull it at the beginning of printing!) so that it can also be slightly raised in usefulness.

The most thorough way is to change to an industrial barcode machine with better performance. This kind of barcode machine will not appear in this situation when printing. In addition, if you really don’t want to change it, you can also put the barcode machine in an air-conditioned room. This will improve the situation. Some customers say the conditions are better in winter than in summer! Maybe it’s the ambient temperature.

What Is The Cleaning Card For?

Posted on November 21, 2022May 5, 2023 by Adminsoft

What Is The Cleaning Card For?

The Cleaning Card is essential to the consistent credit card and the debit card reads on your POS Terminal. A credit card has oils and dirt on its surface. With every swipe into your credit card reader, these contaminants are transferred into the card reader and onto the magnetic heads.

This accumulation of dirt and oils is 80% of the reason why these readers fail.

Every time a credit card transaction has manually entered the fees for that transaction are increased by as much as 2%.

The increase in fees and the time it takes for an employee to enter the number manually are essentially eliminated for a fraction of the cost with regular preventive maintenance.

The use of cleaning cards will prolong the life of the reader.

Widely used in various types of card printers, POSE machine card inlet cleaning, hotel access control system cleaning, IC card refueling machine cleaning, automatic ticket machines, etc.

Used in the cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health, and various public places.

It is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

For Credit Card Readers

Designed to thoroughly clean the reading mechanism for credit card readers. A regular preventative maintenance program will eliminate misreads and keep customers happy. Available in both flat and waffle styles.

For Printheads

Designed to remove build-up and contaminants on the thermal printhead within the printer.

When cleaning the card printer, first open the printer to take out the color ribbon, then tear off the packaging bag, and put the cleaning card into the card input box of the printer. Open the printing preferences of the card printer driver, select the Tools tab, and click the Printer Self Cleaning button to clean. The card is automatically ejected after cleaning is completed.

Take out the cleaning swab, squeeze the stick of the cotton swab, and let the liquid flow out to the head of the cotton swab. Use a cotton swab to gently wipe the printer’s print head (wipe in one direction). Wait for the liquid to dry and the cleaning is complete.

Magicard Turbo Cleaning Kit #N9003-564MED. 50 cleaning cards; 3 printhead cleaning pens; For Magicard Turbo printers. All Magicard Printers.

And the static electricity generated by the machine equipment will attract dust to adhere. Those card reader devices will fail to read the card or in case of failure.

Therefore, it is necessary to perform manual maintenance and cleaning from time to time. But simple manual maintenance and cleaning are time-consuming and labor-intensive.

It is also expensive, and the cost performance is very low.

Yousite company has produced a cleaning product, mainly used to clean various card reader equipment. Just insert the cleaning card into the machine equipment, and it can effectively clean the inside of the card reader several times in a row, and clean the card reader. The material is microfiber, which will not cause damage to the inside of the card reader. It is cheap and easy to use. If you have relevant needs, please contact us in time.

How To Clean The Zebra P330i Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

How to clean a zebra p330i card printer?

After printing 1000 color cards or 5000 monochrome cards, the Zebra P330i LCD will display “cleaning printer”.

And you should clean the printer as soon as possible to ensure good print results.

Then this is a problem, how to clean the Zebra P330i card printer?

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

Steps for cleaning Zebra P330i:

1. Leaving the printer on, press and hold the button for three seconds, the LCD will now display “remove ribbon then close head”,

2. Open the printer lid, lift up the print head carriage then remove the ribbon spools and close the print head carriage. After the ribbon is removed, the LCD will display “MD feeder, and press the button”.

3. Open the card feeder lid and remove all but the bottom card. This card should remain in the feeder until you press the button to eject it from the printer. Do not attempt to pull the card out, or you may damage the feeder.

After the card is removed, the LCD will display” load cleaning card in feeder”.

4. Remove the small cleaning card from its packaging and place it in the car feeder, the feeder belt will move the cleaning card halfway into the feeder.

This is the correct position, do not try to force the card fully into the printer. Once the card cleans the feed belt, it will move through the printer and continue cleaning other components, the LCD will display “cleaning printer” during this process.

After the cleaning card is finished, it will automatically be ejected, the LCD will then display “press button to continue”.

5. Remove the long cleaning card from its packaging, press the button and the message will change to “feed long cleaning card into exit”. Now insert the long cleaning card into the printer exit slot, the long cleaning card will automatically move back and forth as it cleans. The LCD will again display “cleaning printer” during this process.

6. Once the long cleaning card has been ejected, the LCD will change to “ready”. Now you can reinsert the ribbon spools, reload cards and resume printing if you still see spots in your cards after cleaning the printer, you may want to clean the printhead to remove deposits.

7. Before cleaning the print head, turn the printer off, lift the carriage and remove the print ribbon. Then squeeze the plastic stick on the cleaning swab to push the liquid into the tip, now gently move the moistened swap side to side across the printhead elements.

8. Wait two minutes for the print head to dry. Turn the printer back on, and reinsert the ribbon spools.

Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

Thermal Printer Pre-saturated IPA Cleaning Swab

Posted on November 17, 2022November 17, 2022 by Adminsoft

Thermal Printer Pre-saturated IPA Cleaning Swab

Specifications

-isopropyl alcohol clean swab;
-.Single packed;
-.For ZXP3/7/8, P330i, P330m & P430i printers;
-.NO MOQ;

-FREE SAMPLES

1. Put Quality as the first consideration;
2. Rich export experience of more than 10 years in manufacturing and selling cleanroom and esd products.
3. OEM & ODM, customized design/logo/brand and packaging are acceptable.
4. Advanced production equipment, strict quality testing, and control system to make sure superior quality.
5. Competitive price: we are a professional cleanroom/ESD products manufacturer in China, there is no middleman’s profit,
and you can get the most reasonable price from us.
6. Good quality: We have ISO certification, good quality can be guaranteed, and it will help you keep the market share well.
7. Fast delivery time: we have our own factory, which saves your time to discussing with the trading company, we will try our best to meet your request.

IPA Snap Swab

Posted on November 17, 2022November 24, 2022 by Adminsoft

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to kill bacteria & viruses · Disinfects small & difficult to reach electronics.

IPA alcohol cleaning swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

SNAP Swabs 4.5″ IPA Filled Reservoir Handle (50 swabs)TDS Download

1. For cleaning contaminants from printers
2. 2-3ml 99.9% IPA solution
3. Aluminium Foil Packing

Description

Evolis A5003 Cleaning kit IPA Self-saturated alcohol foam swab. Includes 25 cleaning swabs with a spatula foam tip and isopropanol;

Yousite IPA Snap Swabs are specially designed for cleaning effectively dirt, magnetic oxides, oils, debris,
lotions and other contaminants from all kinds of ID card printers, scanners, readers, and barcoders.
It is a cost-effective way to maintain your card readers and increase the span life of the magnetic heads.
IPA snap swab is one of our card reader Cleaning kits products which also contains cleaning cards,
adhesive cleaning tacky rollers, IPA wipes, and cleaning pens for all kinds of different printers such as Zebra, Magicard, Fargo, Datacard, Evolis, EDI, etc.

Features

Cleaning Card

-Excellent absorbency than the 100%polyester cleaning card.

Electronic-grade IPA Snap Swab.

-Easy, Effective, and Safety.

Aluminum Foil.

-Strong tightness and keep it longer.

Hot-press compound.

-Make sure the most excellent cleaning effect.

Present IPA wipes.

-preventive maintenance for your printer.

Thermal Printer Head Cleaning Pen 99% IPA Solution

Posted on November 16, 2022June 23, 2023 by Adminsoft

The IPA cleaning pen is specially used to clean the thermal print head of all thermal printers, including card printers, barcode printers, label printers, receipt printers, Kiosk printers. It is used to remove ink, dirt, and contamination built up on a thermal printer’s print head.

How do you use a thermal printer cleaning pen?

To clean thermal print heads, swipe the cleaning pen across the entire print head surface. Adding a little pressure as you move the pen across the print head will gently scrub off the burnt-on particles. Repeat if necessary. To clean the pen tip, wipe across the clean paper surface.

【1】.Products Description Cleaning Pen

IPA Printhead Cleaning Pen Holder is filled with 99.9% electronic grade IPA solution.

A.Cleaning pens prolong equipment life and reduce maintenance costs. They remove contaminates from transaction equipment, which have been proven when used regularly they save money.
B.Regular Cleaning extends the service life of the print head and provides a better graphic image quality.

99% IPA Solution Thermal Printer Head Cleaning Pen

【2】.Technical Specification

1. Barrel Length: 143mm;
2.Packing:12 pieces per box;
3. Barrel Diameter: 14.3mm;
4. IPA Volume : 5.0 +/- 0.5 ml;
5. Printhead, PCB, IC, SMC, etc.

IPA cleaning pen is a reusable option for cleaning the thermal print head, each pen can be used 6 to 10 times. After each use, you can scrape the nib on a white clean paper to remove the ink residue on the nib for reuse next time.

【3】.Products Application

All ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print Heads.
All types of thermal printers.
Brand ID card printers: Zebra, Fargo, Magicard, Evolis, etc.
Pcb, IC, cleaning fields.

Used for Routine Preventive Maintenance Cleaning on all types of ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print heads.

99% IPA Solution Thermal Printer Head Cleaning Pen Kits

【4】.Directions

1. To clean the pen tip, wipe across the clean paper surface. Recommended usage is every time a new roll of labels or thermal is needed OR to correct lines or imperfections in the printed copy
2. Repeat if necessary.
3. To clean thermal print heads, swipe the cleaning pen across the entire print head surface.

Card Reader Cleaning Card Kits

Posted on April 12, 2022May 5, 2023 by Adminsoft

Yousite company card reader cleaning card set

Yousite company card reader cleaning card is a cleaning card product specially designed to clean the magnetic strips inside various card readers.

Nowadays, various mobile ATMs and large supermarkets have credit card machines and related magnetic card reading devices, which bring great convenience to our daily trading and financial activities. But maintenance of any device after use is crucial.

It will not cause corrosion or damage to the magnetic strip inside the card reader. Wear and tear will affect the service life of the instrument. At the same time, the Yousite card reader machine cleaning card is easy to use, just open the package, insert the ATM cleaning card soaked in solvent into the ATM or poss machine multiple times, and it can be cleaned and used many times.

Professional card printer cleaning kit manufacturer

Yousite company is a professional manufacturer of card printer cleaning kits, especially brand card printer compatible cleaning kits: Zebra, Evolis, Datacard, Fargo, Magicard, etc.

The cleaning kit includes: cleaning cards, cleaning swabs, cleaning wipes, cleaning pens, sticky cleaning cards, sticky cleaning rollers, and more.

Choose suitable cleaning products according to the brand, model and style of the machine. If you are not sure what products to use on your machine, just contact us and we will tell you which cleaning products to use and how to use them. We have rich experience and technology, so you can’t go wrong choosing us.

Cleaning Card For ZEBRA

Posted on April 11, 2021November 19, 2022 by Adminsoft

Cleaning card for ZEBRA

Zebra printer cleaning kits cleaning cartridges, rollers, cards, and swabs.

Use a Zebra cleaning kit to keep your Zebra printer’s innards free of dried ink and print head-clogging debris, extending the life of your card printers and improving overall image quality.

Zebra Card Printers (formerly Eltron) start with innovative engineering to provide quality, on-demand card printing solutions for a variety of card types.

They personalize and laminate virtually every type of media, including blank and preprinted PVC cards, magnetic stripes, proximity, smart cards, and specialty key tags.

Zebra Card Printers are designed, manufactured, and marketed by Zebra Card Printer Solutions. Zebra Technologies is the worldwide leader in barcode label printers and plastic card printers used in automatic identification and plastic card personalization applications. For detailed information on ZEBRA card printers cleaning card, please contact us!

HDP5000 Card Printer Cleaning Kit Special Items

Posted on March 18, 2021November 18, 2022 by Adminsoft

HDP5000 Card Printer Cleaning Kit special items

Fargo card printer in the print industry is also a very good quality printer, but the printer itself received the surrounding environment, such as prolonged use of the print head has accumulated a lot of dust, or due to other causes the printer can not be used, it needs to be clean up.

This paper is to tell you about a special cleaning kit Fargo HDP5000 This item has what Card Printer.

89200/88933 Cleaning Kit 4 Printer Head Cleaning Swabs · 10 Cleaning Cards · 10 Cleaning Pads · 3 Alcohol Cleaning Cards · Compatible with HDP6600 & HDP8500.

First, the four printhead cleaning swabs to clean the printer head.

The printhead is an important part of the card printer, the printhead must be cleaned on a regular basis.

Second, the 10 clean wipes for cleaning the printer’s interior and exterior.

Some fine dust is because of the electrostatic adsorption inside the printer or external, which will lead to a printer or inside the dust being very thick.
Third, 10 sheets of clean paper cards, clean the printer roller.

The wheel is transmitted card components, if the wheel itself carries dust, card-making, will inevitably affect the quality.

Four, or three alcohol cleaning cards, to clean the printer roller.

Our main point is to use the sticky card to the printer wheels are clean. If the effect is not very satisfactory, using alcohol to clean the card can be icing on the cake.

For more card printer cleaning kit items, welcome to our company or contact our sales staff on the site.

Print Issues On Card Printer

Posted on March 18, 2021November 18, 2022 by Adminsoft

Print Issues On Card Printer

The print is too light

1. Printer may need cleaning
2. Increase color intensity
3. Ribbon may be old or defective; replace a new ribbon
4. Increase head resistance.

Spotty on barcode

1. Printer may need cleaning
2. Cards or transport roller have contamination. Use cleaning cards.
3. Monochrome settings may need adjustment.
4. Increase head resistance.

White or colored spots on cards

1. Cards or print heads have contamination. Use cleaning cards.
2. Spots may be shown due to dirt on the transport roller. The transport roller may need cleaning.

Yellow spots

This may be caused by oil residue on the transport roller. Use a cleaning card to clean the transport roller.

White horizontal lines

1. Dust or particles are stuck to the printhead. Use a Cleaning Card to clean the printer or use a Cleaning Pen or Cleaning Swab to clean the printhead manually.
2. Printhead has damaged elements and needs to be replaced.

Blurry letters or images

The card may not be traveling properly due to dirty rollers. This disturbs the timing of when the color panels on the ribbon lay down on the card as it prints. Run a cleaning procedure.