We often use barcode printers in our office life, but we often ignore the maintenance of the printer. In fact, doing a good job of cleaning will greatly improve your work efficiency. Let’s take a look at how to clean it!
1. Cleaning of the print head
To clean the print head regularly and regularly, cleaning kits can use cleaning swab and alcohol. Turn off the power of the barcode printer, keep the same direction when wiping (to avoid dirt residue when wiping back and forth), turn up the print head, remove the ribbon and label paper, and use a cleaning swab soaked in print head cleaning solution (or cleaning wipes ) ), wipe the print head lightly until it is clean, and then gently dry the print head with a clean cotton swab. Keeping the barcode print head clean can get good printing effect, and the most important thing is to prolong the life of the print head.
Printhead Wipes & Cleaning Swabs for Printers
Use a cleaning swab or a swab dampened with isopropyl alcohol to wipe the print element from top to bottom. Also rotate the rollers and clean the platen thoroughly with a cleaning swab. You can use cleaning cards and cleaning pens instead of cleaning swabs, which can better remove stubborn dirt.
Printhead Cleaning Pen with Chisel for Quickly Removing Contaminants from Thermal Printers Including Label Printe.
2. Cleaning of the sensor
The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The sensor includes a ribbon sensor and a label sensor. See the instruction manual for its location. The cleaning method is to wipe the sensor head with a cotton swab soaked in alcohol, and then dry it.
3. Printer glue stick cleaning
The printer glue stick can improve the printing effect. During the printing process, the label paper will leave a lot of powder on the glue stick. If it is not cleaned in time, it will hurt the print head. Cotton swabs and alcohol can be used to clean the glue stick of the printer. After cleaning, it must be wiped dry.
4. Printer roller cleaning
After cleaning the print head, clean the rollers with a cotton swab (or wipes) soaked in 99.9% alcohol. The method is to rotate the roller by hand while scrubbing, and then dry it after it is clean. The cleaning interval of the above two steps is generally once every three days. If the barcode printer is used frequently, it is best to clean it once a day.
5. Drive system cleaning
Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission, and there is dust, which directly affects the printing effect, so it needs to be cleaned frequently. Usually once a week, the method is to use a cotton swab (or cotton cloth) soaked in alcohol to wipe the shafts of the transmission, the surface of the channel and the dust in the chassis, and then dry it after cleaning.
6. Clean the paper feed guide
There are generally no major problems in the guide groove, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it must be cleaned in time. When cleaning, just pull it out with a finger.
In card printer systems, the card printer is the key terminal device. Through the background program setting, the card printer can print personal information such as portrait photos, names, and units on the card surface, which can be used as identity confirmation and realize various smart application functions. The daily cleaning of the card printer is the key to ensure its service life, which should be our great attention.
Use of cleaning kits
To keep your card printer working best, perform a maintenance cleaning after every roll of ribbon or 250 pages printed. The kits in the cleaning kit can help you complete standard cleaning routines more efficiently and thoroughly. Please clean the printer properly according to the following methods. The whole cleaning process only takes a few minutes.
The cleaning card is used to clean the inside of the machine and the cleaning rollers.
Cleaning wipes soaked in 99.99% isopropyl alcohol are used to clean the conveyor rollers inside the machine.
How to clean the print head?
Printhead cleaning pen contains Isopropanol alcohol proven to effectively clean the printhead from dirt, ink, and other contaminants that have built up over time.
Have you noticed an unprinted line on your print card, if so, it’s time to clean your print head.
We should clean the print head after every 250 prints of the printer to ensure the print quality.
1: Open the top cover of the printer. 2: Use the print head cleaning pen to gently wipe the glass body of the print head several times, wipe left and right. To remove dust accumulated on the print head. 3: When the print head is completely dry, the job of cleaning the print head is finished.
How to clean the pressure roller?
Preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.
The printer prerol should be cleaned after printing each roll or 250 cards, if the surface of the printer pressure wheel looks dirty, the surface of the printer pressure wheel should be cleaned in time. Follow the steps below to clean the printer pressure rollers.
Open the card, remove the card, and find the card’s two drive rollers.
Remove the ribbon (and transfer film).
Find the pressure rollers.
Use the cleaning wipes from the cleaning bag to clean the two drive rollers in the printer card magazine.
When cleaning, press ON/CANCEL (on/off) or pause/resume (online) to rotate the pressure wheel and wipe with a clean gauze.
Wait for the pressure wheel to dry and load the ribbon.
After cleaning all drive rollers, close all chassis covers.
Maintaining the Cleanliness of the Cleaning rollers?
Put the cleaning rollers into the printer, the cleaning wheel will absorb the dust particles on the card during printing, thus prolonging the life of the print head and improving the quality of the punched card. Pay attention to whether there are a lot of dust particles on the cleaning wheel, or wash it after every 250 cards are printed. Note your printer model. It may have one or two cleaning rollers.
1: Open the top cover of the machine. 2: Remove the ribbon and printer cleaning roller from the printer. 3: Locate and remove the cleaning wheel between the two belt drive rollers. 4: Tear off a thin layer of paper from the cleaning card, and stick the cleaning card on the drag cleaning card with the cleaning wheel turned over, so that the dirt and dust on the cleaning wheel are adsorbed on the cleaning card.
What are the benefits of regular printer maintenance?
1. Best performance
A clean printer leads to optimal efficiency and performance. As a by-product of normal printing, printers often accumulate residue (consumable dust, adhesives, etc.). Regular cleaning of your Credit Card Reader or ID printer can help prevent poor quality issues and can increase productivity by limiting the number of interruptions to your workflow. Likewise, the printer itself will perform optimally when the thermal/thermal transfer printhead has a clean and clear label output path.
2. Save maintenance cost
When your printers are clean, they are less likely to malfunction. Ensuring that the printheads and hardware inside the printer are clean saves critical time and money from being wasted without costly replacements and time-consuming integration into a new printer.
3. Extend the life of the printer
Credit Card Reader printers are built to last. Regular cleaning routines help extend the life of mission-critical equipment by ensuring that hardware and its vital accessories are free of debris and particles that can accelerate wear.
4. Print clear and readable labels
When a barcode verification detector or handheld scanner is running, dust under the printhead can cause barcodes to fail or scan incorrectly. Cleaning the printer hardware will help prevent labels from being voided and incorrectly reprinted. A clean printer also prevents barcodes from not scanning properly due to dust under the printhead. Reducing the chances of these bad barcodes being shipped out can help prevent large fines later imposed by consignees for deliveries.
5. Reduced need for maintenance
Minimize business disruption by cleaning your printers on a regular basis. When printers are clean and running at maximum capacity, mission-critical equipment is working hard to maximize revenue. When a printer fails, every minute of failure affects your bottom line. In the event of a printer failure, your main concern is minimizing downtime.
Regular cleaning of your printer will not only help your printer last longer, it will also ensure that your labels are always legible.
Product Name: Printer Head Cleaning Card for ATM/Card reader/Printer
These double sided pre-saturated Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides and other contaminants that build up on magnetic and optic reader heads.
Card readers require preventive maintenance to keep the heads clean and debris not build up from contamination. Presaturated cleaning cards are a cost-effective way to maintain readers and extend head life.
They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.
·Presaturated magnetic head cleaning cards. ·Presaturated cards instantly clean heads on point-of-sale credit card readers, access control/ID card readers and all open systems. ·Just swipe to clean. ·The individually packed cards are non-abrasive and incredibly easy to use.
What are features of Cleaning Card?
Card Dimensions (L x W)
2 1/8 “ x 3 3/8”
Card Thickness
0.028” (+ 0.002 / – 0.001)
Card Construction
Polyester / PVC/ Cellulose
Saturation
99% Isopropyl AlcoholUV test card
Saturation Volume
3 ML (+/- 0.5 ML)
Inner Pack
25 Saturated cards/50 Saturated cards
MInner Pack Weight
0.68 lbs UV test card
Inner Pack Dimensions
H: 3 11/32” W: 5 ¼” D: 2 3/8”
Inner Pack Construction
Standard Clay Coated Chipboard Box
MOQ
200pcs
Standard Packing
25 pcs per box ,100 boxes per case, or 50 pcs per box, 50 boxes per case
We specialize in producing all kinds of cleaning cards, which are suitable for all kinds of card reading equipment. Since we applied for and obtained the national patent in 1996 , we have been committed to the development of this field, and have won praise from customers for our diversified products, stable quality, timely delivery and flexible service. Regular use of cleaning cards to clean your machine will keep your machine in working condition and prolong its lifespan. We can clean all these devices with cleaning cards: bank card terminals, money counters, ATMs , POS terminals, card printers, thermal printers, fuel dispensers, access control devices, pay phones, vending machines, ticket vending machines, hotel doors Locks, key cards, etc.
CR80 Cleaning cards
Yousite Professional Card Reader Cleaning Kit
Dirt and dust can get trapped in the card reader, causing it to malfunction and errors. ATM machine cleaning card CR80 is a kind of cleaning product.
A card reader is a type of electronic device that reads all kinds of magnetic cards. It is very common and practical in daily life, precisely because this kind of equipment is common and used frequently, if it is not maintained and cleaned, it is inevitable that there will be problems such as insensitivity of card reading or other malfunctions. Therefore you need professional card reader cleaning products.
Here I recommend the CR80 cleaning card , ipa cleaning swab , cleaning wipes and other packaged products specially produced by Shenzhen Yousite Company. The CR80 cleaning card is used to clean the card slot of the card reader. The cleaning cloth is mainly A simple cleaning of the surface of the card reader. The combination of these products can provide simple, convenient and effective maintenance for various card reader equipment, greatly prolonging the service life of the equipment and reducing the probability of failure. If you need it, please contact the relevant sales personnel of Yousite Company immediately, and we will serve you at any time.
Card Printer Cleaning Roller
Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.
The card printer cleaning rollers is a product specially designed to clean the card when producing the card. Put the cleaning rollers into your printer, the cleaning rollers will absorb the dust particles on the card during printing, which will prolong the life of your print head and improve the quality of your card punching.
Watch out for a lot of dust particles on your cleaning rollers, or clean it after every 250 cards printed.
Note your printer model, it may have one or two cleaning rollers.
Instructions:
1. Open the top cover of the machine.
2. Remove the ribbon and printer cleaning roller from the printer.
3. Locate and remove the cleaning roller between the two ribbon drive rollers.
4. Peel off a layer of thin paper on the cleaning card, attach the cleaning card to the cleaning rollers and drag the cleaning card overturned to make it absorb the dirt and dust on the cleaning rollers to the cleaning card.
China trusted factory direct printer cleaning card production company
Shenzhen Yousite with more than 20 years of professional experience in developing, producing and selling dust-free clean room products. Yousite company specializes in the production of various industrial cleaning products such as cotton swabs, cleaning cards, and cleaning consumables. Our company has its own independent laboratory and production base. At present, our main business is including card printer cleaning cards, cleaning rollers, cleaning kits , etc. All our products are produced in 100-class clean rooms, and the production process is all carried out in accordance with relevant dust-free production specifications to ensure the maximum quality of products.
An OEM manufacturer for some large multinational companies. Because our company’s products are reliable and guaranteed. So our products are exported to developed countries and regions in Europe and America. If you need cleaning cotton swabs, cleaning cards and cleaning kits, please contact us in time. I believe that our company will not let you down.
Now many corporate offices have barcode printers, but usually they forget to maintain our barcode printers. The maintenance of barcode printers is very necessary. Doing a good job in daily maintenance will make our barcode printers work more efficiently. Use it for longer! Today, the editor will take you to take a look at the cleaning method of the barcode printer.
1. Clean the paper feed guide of the barcode printer Generally, there will be no major problems in the paper feed guide of the barcode printer, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it is necessary to clean the guide groove in time , When cleaning, just pull it out by hand.
IPA Alcohol Cleaning Swab
2. Cleaning of the print head of the barcode printer
We need to clean the print head of the barcode printer regularly. And the tools only need cleaning swabs or cleaand alcohol. When cleaning the print head of the bar code printer, pay attention to turn off the power of the bar code printer first, turn up the print head, remove the ribbon and label paper, and wipe the print head lightly with a swab (IPA Alcohol Cleaning Swab) soaked in the print head cleaning solution. until clean, then gently dry the print head with a clean swab. Note that when we wipe the print head, try to keep it in the opposite direction. Keeping the barcode print head clean can get a good printing effect, and most importantly, it can prolong the life of the print head.
3. Cleaning of sensors in barcode printers
The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The cleaning tools and methods are similar to those of the print head.
4. Clean the drive system of the barcode printer
Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission. And there is dust, which directly affects the printing effect. So it needs to be cleaned frequently. Usually once a week, the method is to use alcohol-soaked swabs or IPA Cleaning Wipes to scrub the shafts of the drive, the surface of the channel, and the dust in the chassis, and then wipe dry with a clean swab or IPA Cleaning Wipes .
The above content is the cleaning parts and cleaning methods of the barcode printer. I hope it will be helpful to everyone. If you have other questions, you are welcome to contact us at any time. We Mingtu Enterprise purchases office furniture, office supplies, office equipment, etc. , has more than ten years of purchasing experience, providing one-on-one customer service, welcome to consult~
Manufacturer Directly Sale Zebra Card Printer Cleaning Kits
Use the Zebra Cleaning Kit to keep the inside of your Zebra printer free of dried up ink and debris that clogs the printheads. Which will extend the life of your printer.
Detail Description
Zebra printer cleaning cartridges, rollers, cards and swabs extend the life of your card printers and improve overall image quality.
Characteristics
Printhead—the most important and most expensive part in a card printer. Needs regular maintenance.
Compatible Zebra Cleaning Kits is specially designed to clean the printhead debris, the barrel is filled with IPA solution, it can be used for about 10 times for cleaning the printhead.
For applications on electronic printed circuit card (PCB) components, we use isopropyl alcohol to clean flux residues from PCB repair work and remodeling.
If the printer print head is hidden inside the printer, you can use a cleaning swab as the handle is more flexible.
used on most of Zebra card printers.
Zebra Clean Print Head pen
Applications
Zebra Cleaning Kits105999-310 and 105999-311 is specially used for removing the residue built up on the card printer print head, it can be used on Zebra card printers ZC100&ZC300 series.
Compatible Zebra cleaning kit provides an easy and inexpensive option to maintain the performance and functionality of your ID card printer.
Zebra Card Feed Hopper Short T Cleaning Card. To clean the card feed hopper on Zebra ZXP1, ZXP3 card printers.
Simply insert the card feeder cleaning card into the card slot and run the cleaning cycle. Turn the cleaning card over and repeat the cleaning cycle again. And the printer is ready to use when cleaning is complete.
Our card feeder short T cleaning cards laminated with PVC and polyester wood pulp composite cloth. Which has excellent water absorption and toughness. And the wood pulp can absorb IPA solution to slow down the evaporation time.
Fargo Print Head Cleaning Swabs is easy, self-saturating foamtipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.
Cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.
To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.
The user then runs the swab over the print head until it is clean.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…
Adhesive Cleaning Card
Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)
1.Used for Datacard,Fargo,Zebra ZXP3/DNP Card Printers 2.Good Quality and Competitive price
Adhesive Cleaning Card
Description: Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up.
Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads
Features
CR80 is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.
Cleaning Card -Excellent absorbency than the 100%polyester cleaning card
Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.
Detailed introduction to Thermal Printer and Check Scanner Cleaning Card:
Thermal Printer Cleaning Cards were developed to provide a preventive Maintenance cleaning to remove dirt and debris from print heads.
By cleaning Your Thermal Printer on a regular basis you are maintaining the print image, Extending the life of the print head, and will have accurate and readable Print/barcode images.
Cleaning Card width should be determined by the maximum width of your thermal print head.
We can provide various sizes to fit most the thermal printer type. Cleaning cards, ATM/POS terminals cleaning cards Card Reader.
Cleaning Cards, suitable for all card readers, card printers, ATM/POS terminals, petroleum machines, smart cards, etc.
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…
Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads
Thermal printers cleaning cards zebra magicard evolis card printer cleaning card Card reader cleaning cards will safely and effectively remove dirt, magnetic oxides, oils, lotions, and other pollutants built on the magnetic heads. Cleaning cards are a cost-effective way to maintain your card readers and prolong the life of magnetic heads.
It will clean: Swipe ATMs Credit/Debit card readers POS terminals PVC card printer Access control card reader Gas station equipment Pay phones Hotel door locks Parking system equipment IC card readers Smart card readers More manual swipe readers and insertion readers Usage: To clean the swipe readers: Simply swipe the cleaning card through the card reader back and forth,until there are no residues in card reader. To clean the insertion readers: Insert the cleaning card into the reader,then quit. Repeat this action several times,until there are no residues in card reader. After cleaning, simply dispose of the card. We recommend: Once per day for external or high usage card readers.
Card Readers Cleaning card
This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads Card reader cleaning cards will clean:
Credit & Debit Card Swipe Terminals
POS Terminals
Swipe ATM Machines
Petroleum Pump Card Readers
Credit Vending Machines
Security/Time/Badge Readers
Smart Card Readers
Telephone Card Readers
Slot Machines
Hotel Door Locks
Key Card Readers
Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.
Yousite Examine Scanner cleaning card This Presaturated Cleansing Card is layout to clean effectively as it transfers through the feed course cleaning up the Sensitive Magnetic Heads, Lens, and also Move Rollers. This card protects against processing hold-ups and misreads as it gets rid of contaminants from check viewers/ scanner/MICR feed courses, rollers, as well as heads. A larger Surface Area Cleaning Card with a Broader Width and Longer Size design permitted the Scanner to Clean better and More Effectively. Preventive Upkeep Cleansing Cards have been accepted by OEMs to supply a Positive Cleansing Efficiency and also expand the Life span of the Examine Scanner.
Remove dust, debris, and oils that build up over time during the normal operation of your remote deposit check scanner. Check Scanner Cleaning Kit
Sizes Setup are readily available with a Basic thickness of Tolerance: 0.012″ +/- 0.003″ or (0.305 +/- 0.0762 in mm).
– 2.0 x 6.0 (inches) or 50.8 x 152.4 (mm). Component Number: CSCC- 0206. – 2.5 x 6.0 (inches) or 63.5 x 152.4 (mm). Component Number: CSCC- 2506. – 4.0 x 6.0 (inches) or 101.6 x 152.4 (mm). Component Number: CSCC- 0406. – 4.375″ X 8″ X 0.018″ or 111 X 203 （ mm). Part Number: CSCC- 437508. – 4″ X 8″ X 0.012″. Part Number: CSCC- 0408. – 4″ X 10″ X 0.012″. Component Number: CSCC- 0410. – 4.5″ X 7.25″ X 0.012″. Part Number: CSCC-45725.
Pre-saturated as well as individually secured.
Lowers residue build-up without taking apart devices.
Quick, easy, economical preventative upkeep.
Application:
Tags and Invoices thermal printer cleansing card, including Receipt Printers/ Upc code Printers as well as Label Printers, and Tickets. Printers, Airline Boarding Pass Printers, or Readers Cleansing Cards.
– Suggested Use: Once each day in high-use areas and when each week in reduced-usage areas.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo and optic sensors on all types of reader mechanisms. Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up.
Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.
Pre-saturated ATM/ CARD READER Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads Individually packaged Non-abrasive Safe on plastics Fast evaporation Card Reader / ATM cleaning card All Card Readers ATM/POS Terminals Petroleum Pump Time/Badge Slot/Vending Optical/Barcode Smart Card
How to use card printer cleaning card
1. Required cleaning tools
Magicard M9005-761 Card Printer Cleaning Kit 10 T-Type Long Card, 1 Cleaning Pen, 5 Cleaning Rollers. For the Magicard Rio, Tango and Avalon printers.
1. First open the printer and take out the ribbon.
2. Tear off the packing bag and put the cleaning card into the card input box of the printer.
3. Open the card printer driver’s properties -> device settings.
4. Select the Tools tab, and click Printer
6. Take out the cleaning cotton swab, squeeze the cotton swab stick, and let the liquid flow out to the head of the cotton swab.
7. Use a cotton swab to gently wipe the print head of the printer (wipe in one direction).
The Fargo 081518 cleaning kit includes everything you need to clean the inside of your Fargo DTC printer to keep it working optimally.
8. Wait for the liquid to dry and the body cleaning is complete.
3. Replace the cleaning rubber rollers. It’s roughly like this. If you want to see a specific and clear introduction, you can go to Beijing Fagao Sunshine. They have a clear explanation of the card machine with pictures, which is very clear and easy to understand.
Card Printer Tutorial
If you want to print hard cards, you may need a dedicated card printer to print hard cards.
How to print the credit card machine
first step:
Long press the on/off button of the credit card machine to turn it on. Some card machines have an account number and password, and you need to enter the password to sign in before you can use it.
Step two:
Press the “Confirm” button on the card reader, and then the card reader will enter the menu page, which will generally display: “1. Consumption; 2. Balance inquiry; 3. Cancellation; 4. Sign in; 5. Print; 6. Management; 7. Other” options.
third step:
We use it when we use the credit card machine for consumption, so we can press the “1 key” to select “Consumption”.
the fourth step:
Insert the IC card, if the card does not have a chip, just swipe the card directly in the card slot of the card reader. After the card is swiped successfully, the card number will be displayed on the screen of the card reader, just press “Confirm” after checking.
the fifth step:
That is to say, if the amount you swipe your card is 100, you have to enter 10000 on the credit card machine.
Step six:
After entering the amount, enter the transaction password of the card, confirm that the password is correct, and press the “Confirm” button, and the card reader will successfully swipe the card.
How does the printer swipe the card to print?
Supplement: If you have opened a telephone banking service, you can also complete it through telephone consultation.
How to use the card printer
Card printer consumables have a number of sheets. One set can print 1,000 single-sided cards. In fact, the number of printed cards may be less than 1,000, so budget your own consumables according to your punching volume.
How to clean the card printer
1. Make sure that the power of our printer is turned on.
2. Go back to the computer connected to the printer and click the “Start” menu on the desktop. Then you can see the “Devices and Printers” option in the start menu, click it.
3. After entering the device interface, we can see our printer. Find the printer we want to clean and click the right mouse button, you can see “Printer Properties” in the pop-up menu bar, click it.
4. After entering the printer properties interface, we can find the “Maintenance” option in the interface and click it.
5. In the maintenance interface, we can see the “cleaning” option, click it.
6. After that, an interface will pop up, click the “Execute” option on it.
7. Finally, an interface will pop up saying that our printer is cleaning, just click OK.
1. Click Start in the lower-left corner of the computer. Select Printers and Devices, select the printer driver icon, and what you need to click here is Printing Preferences.
Click the application tool tab, first perform the nozzle inspection on the upper left, at this time the printer will print a piece of paper with a slanted mesh image on it, you can easily see if there are broken lines or incomplete places, if so, you need to Perform nozzle cleaning, which is the second button from the upper left.
How to use the card printer cleaning card
1. Ribbon deviation occurs during printing
The main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor quality of the ribbon cutting.
2. The printing is not clear and the quality is poor
There may be the following reasons:
1. The temperature of the print head is too low or the print density is too light . 2. The print head is not installed correctly
3. There is always a shallow thin line on the label printed by the printer
If your printer has such a problem, it proves that you have not done enough to maintain the printer.
When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.
If the printer punches a card and there is a large area of the card that is not printed, there are two possibilities:
1. The print head is seriously damaged. 2. The data cable of the print head is damaged. If this happens to your printer, please contact our engineers to confirm the damaged part and repair method.
The damage of the print head is irreparable. In this case, only a new print head can be replaced.
The way to avoid this situation is: 1. Pay attention to cleaning the printer regularly. 2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions). 3. Be careful not to touch the print head when opening or closing the case cover. 4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).
If your print head is damaged, you will need to purchase a new print head to replace it.
4. Occasionally, some spots will appear on the label printed by the printer
If there are some spots on your printed cards, it is because your printer has accumulated dust and needs to be cleaned in time. It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage.
If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head.
The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (it is best to wipe each card with an eye cloth before printing), so that the printed card will not be flawed.
5. How to solve the problem of ribbon wrinkling
Reason:
1. 2 Temperature setting is incorrect; 3 Printhead pressure and balance are not set correctly; 4 Media is not set correctly for the feed;
Solution:
1 Reinstall the medium correctly 2 Adjust the printing temperature to meet the printing requirements as much as possible 3 Reset the minimum pressure required for printing 4 Reset the correct paper feeding amount of the medium
6. Why does the ribbon “stick” to the cloth label?
When the barcode machine is printing the cloth label (tape), some types of barcode machines will have the carbon tape and the cloth label stick together.
Let’s take a look at how the carbon ribbon and the cloth label are glued together:
The thermal transfer barcode machine is like a hot stamping machine, except that the hot stamping machine uses gold paper, while the barcode machine uses carbon ribbons. They are all one material that is attached to another material through high temperature. If the printed material is melted at this temperature, it will stick to the carbon ribbon or gold paper.
After clarifying this relationship, we can lower the temperature of the hot spot of the printing hair of the bar code machine or reduce the pressure of the printing head, which can prevent the ribbon from sticking to the cloth label, but sometimes this method is not It is suitable for any barcode machine (low-end barcode machine). At this time, they can pull the cloth label when printing the cloth label (remember to pull it at the beginning of printing!) so that it can also be slightly raised in usefulness.
The most thorough way is to change to an industrial barcode machine with better performance. This kind of barcode machine will not appear in this situation when printing. In addition, if you really don’t want to change it, you can also put the barcode machine in an air-conditioned room. This will improve the situation. Some customers say the conditions are better in winter than in summer! Maybe it’s the ambient temperature.
