Tag Archives: Zebra Printhead Cleaning

IPA Alcohol Cleaning Swab

IPA Alcohol Cleaning Swab

Posted on by

Printer Cleaning Swabs

Now many corporate offices have barcode printers, but usually they forget to maintain our barcode printers. The maintenance of barcode printers is very necessary. Doing a good job in daily maintenance will make our barcode printers work more efficiently. Use it for longer! Today, the editor will take you to take a look at the cleaning method of the barcode printer.

1. Clean the paper feed guide of the barcode printer Generally, there will be no major problems in the paper feed guide of the barcode printer, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it is necessary to clean the guide groove in time , When cleaning, just pull it out by hand.

IPA Alcohol Cleaning Swab

IPA Alcohol Cleaning Swab

2. Cleaning of the print head of the barcode printer

We need to clean the print head of the barcode printer regularly. And the tools only need cleaning swabs or cleaand alcohol. When cleaning the print head of the bar code printer, pay attention to turn off the power of the bar code printer first, turn up the print head, remove the ribbon and label paper, and wipe the print head lightly with a swab (IPA Alcohol Cleaning Swab) soaked in the print head cleaning solution. until clean, then gently dry the print head with a clean swab. Note that when we wipe the print head, try to keep it in the opposite direction. Keeping the barcode print head clean can get a good printing effect, and most importantly, it can prolong the life of the print head.

3. Cleaning of sensors in barcode printers

The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The cleaning tools and methods are similar to those of the print head.

4. Clean the drive system of the barcode printer

Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission. And there is dust, which directly affects the printing effect. So it needs to be cleaned frequently. Usually once a week, the method is to use alcohol-soaked swabs or IPA Cleaning Wipes to scrub the shafts of the drive, the surface of the channel, and the dust in the chassis, and then wipe dry with a clean swab or IPA Cleaning Wipes .
The above content is the cleaning parts and cleaning methods of the barcode printer. I hope it will be helpful to everyone. If you have other questions, you are welcome to contact us at any time. We Mingtu Enterprise purchases office furniture, office supplies, office equipment, etc. , has more than ten years of purchasing experience, providing one-on-one customer service, welcome to consult~
Best Way To Clean Credit Card Reader

Best Way To Clean Credit Card Reader

Posted on by

When the card printer LCD screen displays “CLEAN PRINTER” or the printed image is not clear or complete. It is necessary to use a special cleaning card to clean the printer. In addition, during the printing process, when the sensor is dirty and the card is frequently stuck in the flipper and the “Mechanical” mechanical error is reported, it is also necessary to use a special cleaning card to clean it.

How to clean your credit card machine: tips and steps to follow.

The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer.  So please try not to place the printer in a workplace with too much dust or strong sunlight.

  • Regular cleaning of the printer will keep the printer in top condition, produce better quality results and avoid breakdowns.
  • Before cleaning the printer, please clean the dust around the inside of the printer. (The surrounding dust may be rotated during printing, floating in the machine, and adsorbed on the print head due to static electricity, causing the print head to break the needle ) Cleaning wipes . Then use the cleaning card to clean the card reader ribbon.
  • Recommended to use cleaning cards to clean all shafts in the machine. Replace the cleaning roller after each roll of ribbon. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings .
  • Cleaning of any printer consists of three parts. The cleaning rollers cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine. Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong the service life of the print head. It is recommended to purchase related cleaning kits .
  • Before cleaning the printer, please use a cleaning swab to clean the dust inside and around the printer. (The dust floating inside the printer may generate static electricity during the printer’s working process. The dust is easy to attach to the print head and cause the print head to break the needle.) And then clean it with a cleaning kit.
  • Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card. And the cleaning effect cannot be achieved.

Be careful not to damage the print head when opening or closing the cover.

Do not carry hard objects such as watches and rings when inspecting the machine.  It is easy to touch the print head and damage the print head.

Where is The Cleaning Card Manufacturer?

Where is The Cleaning Card Manufacturer?

Posted on by

Where is the cleaning card manufacturer? Which is the better quality

Where are the manufacturers of cleaning card products? Which one is better in quality! Clean Kachina brand – Yousite! Yousite company specializes in the production of cleaning cards , dust-free cotton swabs, cleanroom cotton swabs, etc., with reliable quality, selling well all over the country, and being praised by new and old customers! Welcome new and old customers to consult and purchase: beck@yaostbio.com .

1. In terms of product quantity

The number of cleaning card products must be effectively increased and expanded, not only to meet the growing needs of domestic printer manufacturers, but also to adapt to the latest developments in foreign printer production, actively expand exports, and actively provide foreign printer companies with what they need. Printer cleaning card products required.

2. In terms of product quality

Fargo 86177 Cleaning Kit

Keep your Fargo ID card printer running smoothly with this 86177 Cleaning Kit with 3 long cleaning cards, 10 adhesive cleaning cards, and 4 cleaning swabs.

In terms of product quality, we must also strive for excellence. To manufacture advanced and high-quality products, the quality must be stable and reliable, not only to meet the precise requirements of the process, but also to ensure the processing quality of the printer. Rod head goes one step further to improve product quality and cleaning effect.

3. In terms of product categories

The types of cleaning card products must also be continuously increased, not only horizontally, but also vertically, to increase the breadth and depth of products, to continuously expand and extend on the original basis, and more importantly, to check for deficiencies and fill in gaps, and strive to be complete. .

Zebra Card Printer Cleaning Kits Manufacturer Directly Sale

Zebra Card Printer Cleaning Kits Manufacturer Directly Sale

Posted on by

Manufacturer Directly Sale Zebra Card Printer Cleaning Kits

Use the Zebra Cleaning Kit to keep the inside of your Zebra printer free of dried up ink and debris that clogs the printheads. Which will extend the life of your printer.

Detail  Description

Zebra printer cleaning cartridges, rollers, cards and swabs extend the life of your card printers and improve overall image quality.

Characteristics

Printhead—the most important and most expensive part in a card printer. Needs regular maintenance.

Compatible Zebra Cleaning Kits is specially designed to clean the printhead debris, the barrel is filled with IPA solution, it can be used for about 10 times for cleaning the printhead.

Printer Clean Swabs

For applications on electronic printed circuit card (PCB) components, we use isopropyl alcohol to clean flux residues from PCB repair work and remodeling.

If the printer print head is hidden inside the printer, you can use a cleaning swab as the handle is more flexible. 

used on most of Zebra card printers.

used on most of Zebra card printers.

Zebra Clean Print Head pen

Applications

Zebra Cleaning Kits  105999-310  and 105999-311 is specially used for removing the residue built up on the card printer print head, it can be used on  Zebra card printers ZC100&ZC300 series.

Zebra Card Printer Cleaning Card

Compatible Zebra cleaning kit provides an easy and inexpensive option to maintain the performance and functionality of your ID card printer.

Zebra Card Feed Hopper Short T Cleaning Card. To clean the card feed hopper on Zebra ZXP1, ZXP3 card printers.

Simply insert the card feeder cleaning card into the card slot and run the cleaning cycle. Turn the cleaning card over and repeat the cleaning cycle again. And the printer is ready to use when cleaning is complete.

Our card feeder short T cleaning cards laminated with PVC and polyester wood pulp composite cloth. Which has excellent water absorption and toughness. And the wood pulp can absorb IPA solution to slow down the evaporation time.

Card Printer Alcohol Cleaning Swab

Card Printer Alcohol Cleaning Swab

Posted on by

Fargo Card Printer Alcohol Cleaning Swab

Pre-saturated IPA Snap Swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

Specifications

.Sterile Swabs;

.Clean the termal printhead;

. 4.5″ handle with IPA filled;

.free sample;

.OEM available;

Fargo card printer alcohol cleaning swab  , 4.5” IPA Filled Reservoir Handle, 25/box;

YOUSITE TDS IPA Snap Swab 4.5

Fargo Print Head Cleaning Swabs  is easy, self-saturating foamtipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.

Cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.

To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.

The user then runs the swab over the print head until it is clean.

Zebra Card Printer Cleaning Card

Zebra Card Printer Cleaning Card

Posted on by

P330i/P120i/P100i Zebra Card Printer Cleaning Card

P330i Printer Cleaning Tutorial

Needed cleaning tools

Zebra 105912-913 Premier Cleaning Kit

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

1. Cleaning up card
2. Cleansing IPA swab
3. Cleaning rubber rollers

Zebra 105912-003 Cleaning Roller

Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.

Use of cleaning tools

1. Initially open the printer and also obtain the ribbon.
2. Detach the packing bag and also put the cleaning card into the card input box of the printer.
3. Open the properties of the card printer motorist– >; device setups.
4. Select the Devices tab, and click the Printer Cleaning button to clean.

IPA Snap Swab

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.

6. Get the cleansing swab, squeeze the cotton bud stick, and let the liquid drain to the head of the cotton swab.
7. Make use of a swab to carefully wipe the print head of the printer (wipe in one direction).
8. Await the liquid to dry and the body cleansing is finished.

Note – Two cleaning cards are needed for the cleaning procedure. A cleansing card coincides in size with a basic plastic card, we call it a “cleaning card”. The various other card is bigger as well as wider at one end, we call it the “Long Cleaning Card“.

Cleaning Process

1. Leave the printer powered on, or transform it on if it is out.

2. You can begin the cleansing procedure with one of the adhering means:
Press and hold the printer’s panel button for a couple of secs up until the message get rid of RIBBONTHEN CLOSE HEAD appears on the LCD.
Go to the P330i Printer Devices software application from your computer system as well as click the CLEAN button. The LCD will certainly show the REMOVE BOW AFTER THAT SHUT HEAD message.

3. Open up the major cover, release the printhead owner, and eliminate the bow. Close the printhead owner. The LCD panel will display the
EMPTY message.

4. Open up the card feeder cover, and afterward remove the card from the card feeder. The last card is tough to get rid of and can be left in the feeder. Press the panel switch on the front of the printer. Cards left in the feeder will be expelled. The LCD panel will certainly display the message tons CLEANSING CARD IN FEEDER.

5. Place the pre-soaked cleaning card right into the card feeder. The cleaning card will immediately be fed right into the printer and the cleaning procedure will certainly begin (there is a hold-up of a few secs after feeding the cleaning card prior to the cleaning step beginning). Throughout cleaning, the LCD will certainly display the message cleansing PRINTER.

6. When this part of the cleansing process is full, the cleaning card will pop out as well as the LCD will certainly present the message PRESS SWITCH TO CONTINUE.

7. After the user presses the panel button, the LCD will certainly show the message FEED LONG CLEANING CARD IN LEAVE. Place the longer end of the lengthy cleansing card into the card leave (located straight over the outcome hopper). When the user inserts a “normal” cleansing card right into the card slot, the LCD will display the INVALID
CARD, PRESS BUTTON message till the individual presses the panel button and also inserts a long card right into the card port.

8. The lengthy cleansing card will be immediately fed right into the printer and also the printing process will begin. The LCD will present the CLEAN PRINTER message once more.

9. When the cleaning procedure is total, the long cleaning card will pop out, and also the LCD will certainly show a READY message, indicating that the printer prepares to resume normal printing procedures.
Note – Two cleansing cards are required for the cleaning process. A cleansing card coincides with size as a general plastic card, we call it a “cleaning card“. The other card is larger as well as broader at one end, we call it the “Long Cleansing Card”.

Keep in mind – If the user does nothing right now (as an example, no lengthy cleansing card put), the LCD will transform to display CLEAN PRINTER after a timeout. The printer can print, however the LCD will remain to display CLEAN PRINTER.
This limited cleaning process does not execute a detailed cleansing. However, it can be done without the “lengthy cleaning card”.
To return the screen to READY, the user is required to perform the complete cleansing procedure from step 2 above with step 9 listed below making use of both lengthy and brief cleaning cards.

10. The cleansing card can just be used as soon as and also must be disposed of after usage.

Product Packaging Information: 25pcs/box.100 boxes/ctn.

Distribution Information:

2-3 weeks for shipment after order confirmation Requirements.

1. Blending polyester, spun shoelace, cellulose, and PVC card.
2. For cleaning impurities from Zebra printers.
3. P330i/P120i/P100i clean.

Description.

The saturated disposable cleaning card: for cleansing effectively dust, magnetic oxides, oils, particles, creams, as well as other pollutants from all kinds of ID card printers, scanners, visitors, and barcodes.

It is an economical way to maintain your card viewers and also boost the life span of the magnetic heads.

ID Card Printer Cleaning Supplies

ID Card Printer Cleaning Supplies

Posted on by

ID Card Printer Cleaning Supplies

Yousite carries cleaning kits for ID card printer manufacturers including Zebra (Eltron), Magicard, Fargo, Evolis, and Datacard.

ID Card Printer Cleaning Kits · CR80 Cleaning Card · Cleaning Swab · Cleaning Pen · T-XL Long Cleaning Card · Cleaning Wipes.

ID Card Printer Cleaning Kits · CR80 Cleaning Card · Cleaning Swab · Cleaning Pen · T-XL Long Cleaning Card · Cleaning Wipes.

ID Card Printer Cleaning Kits · CR80 Cleaning Card · Cleaning Swab · Cleaning Pen · T-XL Long Cleaning Card · Cleaning Wipes.

Specifications

1. For all Card Readers, printers
2. Certificate
3. Pre-saturated and individually sealed
4. Reduces residue

Description

Thermal Printer Cleaning Card.

This specially designed cleaning card cleans thermal print heads that are not easily accessible.

The patented pre-saturated thermal printer cleaning card is saturated with 99.9% isopropyl alcohol. The safe, effective, spun-bonded card allows for the total migration of the cleaning solution and will not dry out before it gets the job done. Simply feed the card through the printer as you would any label or ticket stock, and it will remove contaminants from the print head, guide paths, and rollers.

The substrate material of the CR80 cleaning card is PVC, ISO coded, flocked on either side, pre-saturated with alcohol-free solution, and pouched in polyester laminated aluminum foil to provide excellent moisture vapor barrier properties.

1. Cleans efficiently due to brush cleaning effect.

2. Fewer machine failures due to effective dirt removal.

3. Easy handling

Zebra 105912-913 Premier Cleaning Kit

How To Clean The Zebra P330i Card Printer?

Posted on by

How to clean a zebra p330i card printer?

After printing 1000 color cards or 5000 monochrome cards, the Zebra P330i LCD will display “cleaning printer”.

And you should clean the printer as soon as possible to ensure good print results.

Then this is a problem, how to clean the Zebra P330i card printer?

Zebra 105912-913 Premier Cleaning Kit

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

Steps for cleaning Zebra P330i:

1. Leaving the printer on, press and hold the button for three seconds, the LCD will now display “remove ribbon then close head”,

2. Open the printer lid, lift up the print head carriage then remove the ribbon spools and close the print head carriage. After the ribbon is removed, the LCD will display “MD feeder, and press the button”.

3. Open the card feeder lid and remove all but the bottom card. This card should remain in the feeder until you press the button to eject it from the printer. Do not attempt to pull the card out, or you may damage the feeder.

After the card is removed, the LCD will display” load cleaning card in feeder”.

4. Remove the small cleaning card from its packaging and place it in the car feeder, the feeder belt will move the cleaning card halfway into the feeder.

This is the correct position, do not try to force the card fully into the printer. Once the card cleans the feed belt, it will move through the printer and continue cleaning other components, the LCD will display “cleaning printer” during this process.

After the cleaning card is finished, it will automatically be ejected, the LCD will then display “press button to continue”.

5. Remove the long cleaning card from its packaging, press the button and the message will change to “feed long cleaning card into exit”. Now insert the long cleaning card into the printer exit slot, the long cleaning card will automatically move back and forth as it cleans. The LCD will again display “cleaning printer” during this process.

6. Once the long cleaning card has been ejected, the LCD will change to “ready”. Now you can reinsert the ribbon spools, reload cards and resume printing if you still see spots in your cards after cleaning the printer, you may want to clean the printhead to remove deposits.

7. Before cleaning the print head, turn the printer off, lift the carriage and remove the print ribbon. Then squeeze the plastic stick on the cleaning swab to push the liquid into the tip, now gently move the moistened swap side to side across the printhead elements.

8. Wait two minutes for the print head to dry. Turn the printer back on, and reinsert the ribbon spools.

Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

Multi-function Cleaning Wipe -IPA

Multi-function Cleaning Wipe -IPA

Posted on by

IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

Multi-function cleaning wipe -IPA

Multi-function cleaning wipe -IPA

The use of cleaning wipes is very wide, not only can be used for card printers, and thermal printers to wipe the print head, machine body,
but also can be used to wipe the phone, computer screens, and so on.

In addition to cleaning can also be used for the above places can also be used for a lot of places clean wipes.

Multi-function cleaning wipes.

IPA-M3 size: 127mm * 152mm.

containing 99.9% IPA solution, the use of tin foil bags (to avoid IPA volatile) independent packaging.

Store in a cool place, with a shelf life of 2-3 years.

Yousite is the direct manufacturer of clean wipes, clean wipes production is made by hand.

Each process has professional monitoring and control and strives to do all excellent products.

Pre-saturated IPA Snap Swab

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable)

Posted on by

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable).

IPA-4.5 Snap swab – 4.5″. Pre-saturated IPA Snap Swab(3″/4.5″ are available). The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

Simply Squeeze or Snap the Plastic Handle and the Foam Head becomes saturated with just the right amount of Cleaning Solution.

Clean the Thermal Print Head by using a back & fourth motion to effectively remove dirt and debris accumulated on the print head thus extending the life of the print head and maintaining a readable image.

Thermal Printer Pre-saturated IPA Cleaning Swab

Lint free, non-abrasive, and pre-saturated with 99.7% IPA (isopropyl alcohol), the foam tips will thoroughly but gently clean delicate parts.

Available in 2 Sizes: 3.0” or 4.5”
Packing: 25 Swabs per Ziplock Bag; 50 Swabs/Box
Part Number: IPASS-3.0 and
Part Number: IPASS-4.5 respectively.

Features:

100 PPI, Open Cell Polyurethane Rectangular Foam Tipped. Non-Abrasive.
Typical Applications: Computer Keyboards. Optical and Magnetic Head Devices. Electronic Components.