How To Clean The Zebra P330i Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

How to clean a zebra p330i card printer?

After printing 1000 color cards or 5000 monochrome cards, the Zebra P330i LCD will display “cleaning printer”.

And you should clean the printer as soon as possible to ensure good print results.

Then this is a problem, how to clean the Zebra P330i card printer?

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

Steps for cleaning Zebra P330i:

1. Leaving the printer on, press and hold the button for three seconds, the LCD will now display “remove ribbon then close head”,

2. Open the printer lid, lift up the print head carriage then remove the ribbon spools and close the print head carriage. After the ribbon is removed, the LCD will display “MD feeder, and press the button”.

3. Open the card feeder lid and remove all but the bottom card. This card should remain in the feeder until you press the button to eject it from the printer. Do not attempt to pull the card out, or you may damage the feeder.

After the card is removed, the LCD will display” load cleaning card in feeder”.

4. Remove the small cleaning card from its packaging and place it in the car feeder, the feeder belt will move the cleaning card halfway into the feeder.

This is the correct position, do not try to force the card fully into the printer. Once the card cleans the feed belt, it will move through the printer and continue cleaning other components, the LCD will display “cleaning printer” during this process.

After the cleaning card is finished, it will automatically be ejected, the LCD will then display “press button to continue”.

5. Remove the long cleaning card from its packaging, press the button and the message will change to “feed long cleaning card into exit”. Now insert the long cleaning card into the printer exit slot, the long cleaning card will automatically move back and forth as it cleans. The LCD will again display “cleaning printer” during this process.

6. Once the long cleaning card has been ejected, the LCD will change to “ready”. Now you can reinsert the ribbon spools, reload cards and resume printing if you still see spots in your cards after cleaning the printer, you may want to clean the printhead to remove deposits.

7. Before cleaning the print head, turn the printer off, lift the carriage and remove the print ribbon. Then squeeze the plastic stick on the cleaning swab to push the liquid into the tip, now gently move the moistened swap side to side across the printhead elements.

8. Wait two minutes for the print head to dry. Turn the printer back on, and reinsert the ribbon spools.

Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

Multi-function Cleaning Wipe -IPA

Posted on November 17, 2022November 18, 2022 by Adminsoft

IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

Multi-function cleaning wipe -IPA

The use of cleaning wipes is very wide, not only can be used for card printers, and thermal printers to wipe the print head, machine body,
but also can be used to wipe the phone, computer screens, and so on.

In addition to cleaning can also be used for the above places can also be used for a lot of places clean wipes.

Multi-function cleaning wipes.

IPA-M3 size: 127mm * 152mm.

containing 99.9% IPA solution, the use of tin foil bags (to avoid IPA volatile) independent packaging.

Store in a cool place, with a shelf life of 2-3 years.

Yousite is the direct manufacturer of clean wipes, clean wipes production is made by hand.

Each process has professional monitoring and control and strives to do all excellent products.

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable)

Posted on November 17, 2022November 17, 2022 by Adminsoft

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable).

IPA-4.5 Snap swab – 4.5″. Pre-saturated IPA Snap Swab(3″/4.5″ are available). The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

Simply Squeeze or Snap the Plastic Handle and the Foam Head becomes saturated with just the right amount of Cleaning Solution.

Clean the Thermal Print Head by using a back & fourth motion to effectively remove dirt and debris accumulated on the print head thus extending the life of the print head and maintaining a readable image.

Thermal Printer Pre-saturated IPA Cleaning Swab

Lint free, non-abrasive, and pre-saturated with 99.7% IPA (isopropyl alcohol), the foam tips will thoroughly but gently clean delicate parts.

Available in 2 Sizes: 3.0” or 4.5”
Packing: 25 Swabs per Ziplock Bag; 50 Swabs/Box
Part Number: IPASS-3.0 and
Part Number: IPASS-4.5 respectively.

Features:

100 PPI, Open Cell Polyurethane Rectangular Foam Tipped. Non-Abrasive.
Typical Applications: Computer Keyboards. Optical and Magnetic Head Devices. Electronic Components.

Thermal Printer Pre-saturated IPA Cleaning Swab

Posted on November 17, 2022November 17, 2022 by Adminsoft

Thermal Printer Pre-saturated IPA Cleaning Swab

Specifications

-isopropyl alcohol clean swab;
-.Single packed;
-.For ZXP3/7/8, P330i, P330m & P430i printers;
-.NO MOQ;

-FREE SAMPLES

1. Put Quality as the first consideration;
2. Rich export experience of more than 10 years in manufacturing and selling cleanroom and esd products.
3. OEM & ODM, customized design/logo/brand and packaging are acceptable.
4. Advanced production equipment, strict quality testing, and control system to make sure superior quality.
5. Competitive price: we are a professional cleanroom/ESD products manufacturer in China, there is no middleman’s profit,
and you can get the most reasonable price from us.
6. Good quality: We have ISO certification, good quality can be guaranteed, and it will help you keep the market share well.
7. Fast delivery time: we have our own factory, which saves your time to discussing with the trading company, we will try our best to meet your request.

IPA Snap Swab

Posted on November 17, 2022November 24, 2022 by Adminsoft

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to kill bacteria & viruses · Disinfects small & difficult to reach electronics.

IPA alcohol cleaning swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

SNAP Swabs 4.5″ IPA Filled Reservoir Handle (50 swabs)TDS Download

1. For cleaning contaminants from printers
2. 2-3ml 99.9% IPA solution
3. Aluminium Foil Packing

Description

Evolis A5003 Cleaning kit IPA Self-saturated alcohol foam swab. Includes 25 cleaning swabs with a spatula foam tip and isopropanol;

Yousite IPA Snap Swabs are specially designed for cleaning effectively dirt, magnetic oxides, oils, debris,
lotions and other contaminants from all kinds of ID card printers, scanners, readers, and barcoders.
It is a cost-effective way to maintain your card readers and increase the span life of the magnetic heads.
IPA snap swab is one of our card reader Cleaning kits products which also contains cleaning cards,
adhesive cleaning tacky rollers, IPA wipes, and cleaning pens for all kinds of different printers such as Zebra, Magicard, Fargo, Datacard, Evolis, EDI, etc.

Features

Cleaning Card

-Excellent absorbency than the 100%polyester cleaning card.

Electronic-grade IPA Snap Swab.

-Easy, Effective, and Safety.

Aluminum Foil.

-Strong tightness and keep it longer.

Hot-press compound.

-Make sure the most excellent cleaning effect.

Present IPA wipes.

-preventive maintenance for your printer.

Thermal Printer Head Cleaning Pen 99% IPA Solution

Posted on November 16, 2022June 23, 2023 by Adminsoft

The IPA cleaning pen is specially used to clean the thermal print head of all thermal printers, including card printers, barcode printers, label printers, receipt printers, Kiosk printers. It is used to remove ink, dirt, and contamination built up on a thermal printer’s print head.

How do you use a thermal printer cleaning pen?

To clean thermal print heads, swipe the cleaning pen across the entire print head surface. Adding a little pressure as you move the pen across the print head will gently scrub off the burnt-on particles. Repeat if necessary. To clean the pen tip, wipe across the clean paper surface.

【1】.Products Description Cleaning Pen

IPA Printhead Cleaning Pen Holder is filled with 99.9% electronic grade IPA solution.

A.Cleaning pens prolong equipment life and reduce maintenance costs. They remove contaminates from transaction equipment, which have been proven when used regularly they save money.
B.Regular Cleaning extends the service life of the print head and provides a better graphic image quality.

99% IPA Solution Thermal Printer Head Cleaning Pen

【2】.Technical Specification

1. Barrel Length: 143mm;
2.Packing:12 pieces per box;
3. Barrel Diameter: 14.3mm;
4. IPA Volume : 5.0 +/- 0.5 ml;
5. Printhead, PCB, IC, SMC, etc.

IPA cleaning pen is a reusable option for cleaning the thermal print head, each pen can be used 6 to 10 times. After each use, you can scrape the nib on a white clean paper to remove the ink residue on the nib for reuse next time.

【3】.Products Application

All ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print Heads.
All types of thermal printers.
Brand ID card printers: Zebra, Fargo, Magicard, Evolis, etc.
Pcb, IC, cleaning fields.

Used for Routine Preventive Maintenance Cleaning on all types of ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print heads.

99% IPA Solution Thermal Printer Head Cleaning Pen Kits

【4】.Directions

1. To clean the pen tip, wipe across the clean paper surface. Recommended usage is every time a new roll of labels or thermal is needed OR to correct lines or imperfections in the printed copy
2. Repeat if necessary.
3. To clean thermal print heads, swipe the cleaning pen across the entire print head surface.

Card printer cleaning kit manufacturer

Posted on November 16, 2022November 18, 2022 by Adminsoft

Card printer cleaning kit manufacturer
Card printer cleaning kit manufacturer

Yousite is a professional manufacturer of card printing machine cleaning kit,

Especially the brand card printer cleaning kit: Zebra, Evolis, Datacard, Fargo, Magicard and so on.

Cleaning kit includes: cleaning card, clean foam swab, cleaning cloth, cleaning pen, sticky dust cleaning card, sticky dust cleaning wheel and so on.

You can choose the appropriate cleaning products according to the brand, model and style of the machine.

CR80 Single-sided Or Double-sided Adhesive Cleaning Card

Posted on November 12, 2022June 23, 2023 by Adminsoft

CR80 single-sided double-sided adhesive cleaning card

Yousite company is a direct manufacturer of card printer cleaning kits, and the products can completely replace the original products. Not only the product price is low and the quality is high, but it can also reduce the transportation cost. Everything is based on the interests of customers. As long as there is a need, we will try our best to satisfy you. Yousite company only makes high-quality products!

CR80 adhesive cleaning card is divided into single-sided and double-sided. The standard size is 54*86mm, made of high-quality PVC cards and imported low-viscosity adhesive paper, 50 pieces/box. Use with any machine in need. The most used ones are Evolis/DNP/HITI Chengyan CS200E and so on.

CR80 Single-sided Or Double-sided Adhesive Cleaning Card

Card Reader Cleaning Cards

CR80 adhesive cleaning cards are made of imported low-viscosity adhesive paper, unlike some inferior adhesive paper used in the market to reduce costs. When cleaning, the machine may be jammed, and the machine may be damaged if it is serious. So please do not choose them just because of their low price, quality is the most important thing. The price is a little bit different, why don’t you choose a quality product? In this way, you can not only use it with confidence but also use it comfortably!

Thermal printers, card printers, and thermal printers, are mainly used for cleaning cards, cleaning pens, and cleaning foam swabs to clean up

CR80 cleaning card is a very practical cleaning card with the same size as ID card, bank card and subway card, so it can be used in a wide range of applications, such as printers, self-service cash machines, self-service ticket machines, vending machines, etc. Cargo planes, etc., are very easy to use, and the cleaning effect is also very good. Now the CR80 cleaning card produced by Shenzhen Yousite company has two kinds of packaging, one is the packaging bag with Yousite company LOGO printed on it, and the other is neutral packaging with some simple instructions on it, and there is no Yousite company company any sign of .

If you want to use your own LOGO in the process of ordering, it is also possible. As long as your order quantity reaches a certain standard, we can customize exclusive packaging bags according to your specific needs to meet your needs. Multi-packaging looks forward to your consultation and cooperation.

Email(beck): beck@yaostbio.com

How Do You Clean A Bill Counter?

Posted on November 12, 2022May 5, 2023 by Adminsoft

Bill counter cleaning

The money counter is an indispensable tool in the financial field. Money counters are widely used in banks, companies and other financial enterprises such as securities companies and funds.

However, during the process of use, the sensor head on the banknote counter will inevitably be polluted by the dust and dirt on the banknotes, and may become insensitive or jammed.

Therefore, daily maintenance and cleaning are required to prevent malfunctions.

The method of removing dust from the banknote counter is as follows:

1. The dust of the ultraviolet lamp can be cleaned with a brush or a rag, but the power cord of the machine must be unplugged first to avoid electric shock;

2. After clearing the dust on the lamp tube, the dust box of the machine can be cleaned. For the banknote counter with a dust suction device, the dust sucked by the dust suction device is installed in the dust box, which can be disassembled. Come down and clean up.

Note: The mechanism of the banknote counter is relatively complicated. Do not touch the place that cannot be touched with a brush or a rag, otherwise it is easy to damage the machine.

What products do you need to use to clean the banknote counter without damaging the banknote counter itself?

Shenzhen Yousite company is a professional manufacturer of all kinds of cleaning cards. For the cleaning of currency counters and other equipment, there is a special production of cleaning cards for currency counters. Vacuum-packed after soaking in relevant organic cleaning solutions. The use of this cleaning cloth is very simple. Simply disassemble and wipe gently to clean the sensor head of the money counter, improve the recognition effect, and reduce the chance of equipment failure.

How to Clean Card Reader

Posted on October 19, 2022May 5, 2023 by Adminsoft

Card Reader card machines are designed to extract and decipher your account information contained in the magnetic stripe on your card. The mag stripe reader can become too dirty to accurately read the information, resulting in lost time from having to key the information in by hand. Plus, each card that must be keyed into the system costs the business more to process. To keep sales up and costs down, it is imperative to keep the mag strip reader on a credit card machine clean. Here’s how.

How to clean a card reader?

The cleaning and maintenance of a credit card reader are recommended by the equipment manufacturer to keep the reader in good working order and to prolong the life of the device if done properly and regularly. Your credit card readers come in all shapes and sizes, but they typically have the same type of unit inside the swipe area that has a magnetic head in the care pathway. You can use a Yousite Cleaning Card to swipe the card reader a few times. If your device integrates a smart card reader, you can insert the Cleaning Card into the slot a few times. Wait one minute to let the IPA dry, then your card reader is ready to work.

Supplies & Materials Needed

Here is a complete list of all the supplies and materials you’ll need to clean your Card Reader:

Card reader cleaning card;
Alcohol-based cleaning wipes or cleaners;

Credit Card Reader Cleaning Steps

How to clean a credit card reader

step 1.

Obtain a cloth free of lint and oil. Making sure that you are using the right cleaning medium is a must for getting the best results. The best cleaning medium to use is a chamois cloth or dollar bill or a premade cleaning card.

step 2.

Wrap the cleaning cloth around a credit card. Remove a credit or debit card from your wallet, and wrap the chamois cloth or dollar bill around the card so that it completely covers the front and rear surface of the card with a single layer of cloth.

step 3.

Swipe the card back and forth gently through the reader. Simply slide the card back and forth through the mag reader slot several times as though you were processing a credit sale. Do not push more vigorously or too quickly, or you might damage the reader.

step 4.

Attempt to run a sale transaction. See if the reader will now recognize the information on the back of your card. If not, repeat the process, except add a very small amount of isopropyl alcohol to the cloth. The reader may be dirtier than you think.

step 5.

Get a replacement. If this technique fails, the odds are you have a defective unit that must be replaced. Contact your merchant account provider for a new unit.

what to clean?

CR80 cleaning card is a common cleaning product in the industry.

cr80 cleaning card

The cleaning card can not only be widely used in various types of card printers and card inlets of pose machines, but also can be used in the hotel door system.

Cleaning of IC card refueling machines, automatic ticket machines, etc., have a wide range of uses, and this kind of cleaning card is simple and easy to use, easy to operate, high cleaning effect, and can effectively remove the magnetic stripe of the machine equipment card reader The dust on the surface is dirty, reducing the frequency of equipment failure and prolonging the service life of the machine.

How to use: Tear open the notch of the packaging bag, take out the cleaning card, insert it into the slot of the card reader, and then enter the automatic cleaning state;

Application range: all card readers, card printers, ATM/POS terminals, key card readers, etc.;

Why Clean?

Cleaning your Card Reader is one of the most important steps you can take to protect your printer from damage – it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer. Cleaning your point-of-sale and self-checkout hardware regularly can help protect your employees and customers from contracting contagious diseases and keep them from spreading these diseases to their loved ones when they leave the store. And it can save you money since printer repairs can be costly and take time.

Protect your customers from any possible infections;
Protect and improve your business image, as no one wants to touch dirty card readers;
No one wants to touch dirty card readers.
Keep your employees healthy and less likely to take days off;
Provide your customers with a safe shopping experience;
Extend the lifespan of your POS equipment;
Prevent cross-contamination among all of your customer-facing terminals and other shared physical touchpoints between your employees and your customers;
Contribute to the fight against COVID-19;
Increase the performance of your POS equipment, especially when debris and grease slower or impact its use;