Category Archives: FAQ

Card Reader Plastic Cleaning Card

How to Clean Your Reader Card Machine

Posted on by

How to clean your reader card machine: tips and steps to follow

POS machine is a terminal reader equipped with barcode or OCR code technology, and has cash or barter limit cashier function. Its main task is to provide data services and management functions for commodity and media transactions, and to perform non-cash settlements.

It is required in many places, especially large shopping malls, and it is used very frequently. It has been used for a long time. There will be dust and debris, etc., and it needs to be cleaned at this time.

Tools/Materials

method/stepIf the display screen is too dirty and difficult to clean, you can use our IPA Cleaning Wipes. And then slowly scrub on the display screen, wipe off the dirt, and then wipe the display screen with a dry cloth.

  1. 1

    Tear open the special cleaning card packaging, take out the cleaning card

  2. 2

    Insert a clean cleaning card into the card slot directly under the POS machine and wipe it back and forth until the card slot is clean

  3. 3

    Then use the same method to take out the cleaning card and insert it into the card slot on the side of the POS to wipe back and forth until the card slot is clean.

     

Precautions

  • After the first wipe, if the cleaning card is still very clean, you can continue to use the cleaning card for the second step.

The POS machine must always be clean and clean, which is considered good maintenance.

The display screens are the same, and the display screen must be kept clean.

Since the POS cash register is an electronic device, there are many special attentions in cleaning.

Cleaning cards and products for all POS machines including credit card chip readers, smart card readers, EMV chip card readers, …

After the second step of wiping, the cleaning card is discarded.

Thermal Printers Cleaning Cards Zebra Magicard Evolis

Posted on by

Thermal printers cleaning cards zebra magicard evolis card printer cleaning card

Card reader cleaning cards will securely and also effectively get rid of dust, magnetic oxides, oils, creams, and various other pollutants improved magnetic head.
Cleaning cards are an affordable method to keep your card visitors as well as prolong the life of magnetic heads.

Card Reader Plastic Cleaning Card

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

It will clean:

Swipe Atm machines Credit/Debit card viewers POS terminals PVC card printer Access control card viewers Gasoline station devices Pay phones Resort door locks Parking system equipment IC card readers Smart card viewers A lot more hand-operated swipe visitors and insertion viewers.

Usage: To cleanse the swipe readers: Just swipe the cleansing card with the card viewers back and forth, until there are no deposits in card reader.
To cleanse the insertion visitors: Place the cleaning card into the visitor, after that stopped. Repeat this action numerous times, until there are no residues in card visitor. After cleaning, just get rid of the card.

We recommend: Once daily for external or high use card readers.

Compatible Alcohol T-card Cleaning Kits for Zenius/Primacy Printer

Posted on by

Evolis High Trust Original/Compatible Alcohol T-card Cleaning Kits for Zenius/Primacy Printer

POS/ATM Machine CR80 Cleaning Card

CR80  is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.

Key Specifications/Special Features:

Specifications

1. Factory direct price.
2. All Evolis kits.
3. Free samples.

Materials: cellulose polyester+PVC+cellulose.
Technology: hot press compound.
Package: aluminum foil bag.
Packing: 10 T cards/bag.

Compatible printers: Evolis Zenius and Primacy

Keeping your printer clean will ensure printer functionality and prolong the lifespan.

Keep your card printer clean with the Evolis ACL004 T-Card cleaning kit. Containing 10 T shaped cleaning cards, this kit saves you money by extending the life of your Evolis printer and print head. The T shape of these cards allows you to remove dust, oils and debris from the inside of the machine, which can potentially be harmful if left untreated. This cleaning kit is an excellent solution for maintaining the outstanding print quality of your card printer.

Evolis ACL004 adhesive cleaning ‘T’ cards offer an easy and inexpensive way to maintain your printer’s optimal printing functionality.
Evolis ACL004 cleaning cards feature a low-tack adhesive that cleans dust and other debris from your Evolis printer’s card rollers.
To help avoid damage to your printhead and help ensure the quality of your printed cards.

How to Clean Card Reader

Ic Reader Cleaning Card Hotel Door Lock

Posted on by

Ic reader cleaning card hotel door lock

Specializing in the production of various types of cleaning cards, suitable for all types of card reading equipment.

Since we applied for and obtained the national patent in 2009, we have been committed to the development of this field, and have won praise from customers for our diversified products, stable quality, timely delivery and flexible service.

Regular use of cleaning cards to clean your machine will keep your machine in working condition and prolong its service life.

Ic Reader Cleaning Card Hotel Door Lock

Ic Reader Cleaning Card Hotel Door Lock

We can clean all these devices with cleaning cards: bank card terminals, cash counters, ATMs, POS terminals, card printers, thermal printers, fuel dispensers, access control devices, pay phones, vending machines, ticket vending machines, hotel doors Locks, key cards, etc.

1.This card presaturated with IPA
2.It has excellent absorbency
3.Keep the heads clean and health
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up.

Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads

Cleaning card Selling Point :

1. Our material is Blend cellulose polyester spunlace, not 100%polyester
2. Extremely absorbent, It is higher than 100% polyester
3. Volatile time is longer, It is good for cleaning.
4. Our packing is aluminum foil, It is good for storage

Classification introduction of non-contact IC card and contact IC

Non-contact IC card, also known as radio frequency card, is composed of IC chip and induction antenna, which are packaged in a standard PVC card, and the chip and antenna have no exposed parts. It successfully combines radio frequency identification technology and IC card technology, which ends the problem of passive (no power supply in the card) and contact-free, and is a major breakthrough in the field of electronic devices. The card is close to the surface of the reader at a certain distance (usually 5-10cm), and the data reading and writing operations are completed through the transmission of radio waves.

Contactless IC cards:

1). Radio frequency encryption (RF ID)—ID card. The information access of the radio frequency card is accomplished through radio waves. There are no mechanical points of contact between the host and the RF. Such as HID, INDARA, TI, EM, etc. The meal card (thicker) and access control card used by most campuses are ID cards.

2). Radio frequency memory card (RF IC)—–non-contact IC card. Radio frequency memory cards also access information by radio. It increases the radio frequency transceiver circuit on the basis of the memory card. Such as MIFARE ONE. The bus cards used in some cities in the early days, and the meal cards and hot water cards used in some campuses are radio frequency memory cards.

3). The radio frequency CPU card (RF CPU)—–an active card, which adds a radio frequency transceiver circuit on the basis of the CPU card. The CPU card has its own operating system COS, so it can be called a real smart card. Bus cards in big cities, financial IC cards, and meal cards in very few campuses are radio frequency CPU cards. The difference between contact IC card and non-contact IC card: The reliability of contact IC card and non-contact IC card is better than that of magnetic card, and it has a wide range of applications.

The non-contact IC card chip is encapsulated in PVC material, and the radio wave of the chip in the card can be remotely sensed with the card reading device to read the data. In contrast, non-contact IC cards have good confidentiality, high security performance, large storage capacity, and fast transmission speed.

Where Is The CR80 Cleaning Card Used?

Zebra Evolis Printhead Cleaning with Solution CR80

Posted on by

Zebra Evolis Printhead Cleaning with solution CR80 Thermal Printer Cleaning card

Product Name: Card Printer ATM Machine Swipe Machine Cleaning Card;

Product Model: CR8O Cleaning Card Product Material: PVC card + non-woven fabric;

Commodity Efficiency: Can quickly remove dust, oil and water, even parts that cannot be touched by hands Clean and clean

Packing method: Neutral packaging, aluminum foil bag Sealed packing: 50 pieces/box 2500 pieces/box 50 boxes/box

Product specifications: 85mmx54mmx0.711mm (length x width x thickness) (General card printers card machines ATM machines can Applicable)

CR80 cleaning card aluminum foil bag sealed independent packaging, easy to tear, easy to carry

Our material is Blend cellulose polyester spunlace, not 100%polyester.

How to Clean Card Reader

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

Sorbency is excellent . Volatile time is longer.
Cleaning Card CR80
50 Cleaning Cards Per Box
54 X 85 X 0.711 mm
Part Number : CR80
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up. Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads

Evolis Complete Cleaning Kit

Evolis Primacy Card Printer Regular Cleaning

Posted on by

Evolis Primacy Card Printer Periodic cleaning method through machine panel operation.

The Primacy machine is operated through the machine panel for regular cleaning. Please follow the steps below for regular cleaning:

Repeated runs through the printer with the cleaning card clean the cleaning roller, maintaining print quality and extending the life of the printhead.

How to Clean the Evolis Primacy Printer. Insert the cleaning card in the opened feeder, adhesive face upwards. This starts the cleaning. Adhesive card.

1. Open the printer cover.

2. Take out the ribbon.

3. Close the cover and make sure to hear a click.

4. Open the card feeder on the printer.

5. Use the ruler to adjust the card thickness to the maximum position.

6. Take out all the cards in the card feeder.

7. Double-click the cleaning button on the control panel, and then insert the cleaning card .

8. Peel off the film on the cleaning card, insert the cleaning card into the card feeder according to the picture, with the sticky side facing up.

9. The used cleaning card will automatically pop into the output tray. Regular cleaning is done.

HiTi CS-220E Card Printer Ribbon not Detected

HiTi CS-220E Card Printer Ribbon not Detected

Posted on by

HiTi developed the CS-220E card printer and reported that the ribbon was not detected when it was powered on

HiTi card printer CS-220E reports 0201 No ribbon detected when the machine is turned on.

If this error occurs, the machine failure can be eliminated from the following points.

1. Check whether the ribbon is installed in the machine, if not, please install the ribbon correctly.

2. Whether the ribbon in the machine is installed correctly, if the ribbon is installed incorrectly, please install the ribbon correctly.

3. The ribbon in the machine is broken, connect the broken part, stick it with tape, and reinstall the ribbon correctly.

4. You can calibrate the sensor for the machine in the printing preferences.

If the machine still reports an error after eliminating the above points, please contact our technical department in time!

Yousite company offers many OEM cleaning card solutions to suit your needs, including private label cleaning card.We are producing card printer cleaning kits and supplying all major brands Manufacturer of a full range of cleaning supplies. We can customize and produce standard size IPA according to customer’s requirements Soak cleaning card, sticky rollers, sticky card, IPA cleaning pen and IPA cleaning cloth

Common Faults And Solutions of ZEBRA Barcode Printers

Posted on by

Common faults and solutions of ZEBRA barcode printers

When we use Zebra printers, we will inevitably encounter some operational problems or printer failures because we are not familiar with the printer or have used the printer for a long time. Now Xiaobian has sorted out various common Zebra printer faults and solutions for you

 

Fault 1: The printing software cannot print Chinese characters

Analysis: Many printing software use the Windows print driver to print Chinese characters through the printing software, so you need to choose a suitable printing program to print Chinese characters.

Solution: Use a good driver, such as Seagull driver, or use BarOne software to directly drive the printer.

 

Fault 2: Replace the label paper, and the carbon ribbon appears after printing

Analysis: The label printer recognizes the label paper, and the ribbon sensor has a memory function. When replacing the label paper and ribbon, it cannot be recognized.

Solution: The paper needs to be remeasured. Use the Zebra label printer S such as 400, under normal startup, press the MODE button three times and then press the FEED button. At this time, a lot of paper will come out. When the paper comes out, it will be the measurement paper, and the information will be automatically recorded on the sensor of the printer. Need to measure the paper again, it can be used normally.

 

Fault 3: When printing a large label, only half of it is printed

Analysis: This is because the memory of the label printer is too small. When the label is too large, some information cannot be stored and lost.

Solution: Increase the memory of the label printer.

Common Faults and Solutions of Zebra Printers

 

Fault four: unclear printing, poor quality

Analysis: There are three possibilities, first, the print head may not be installed correctly; second, the temperature is too low; third, the quality of the label paper and ribbon is poor.

Solution: For one, readjust the position of the print head, paying special attention to the consistency of left and right height; for the second, increase the printing temperature, that is, increase the printing density; for the third, replace better label paper and ribbon.

 

Fault five: Ribbon wrinkled

Analysis: It may be that the temperature setting of the label printer is not correct, it may be that the ribbon around the machine is not correct, or the media is not set correctly for the amount of paper, it may be that the pressure and balance of the print head are not set correctly

Solution: reinstall the driver, adjust the printing temperature, and adjust the printing pressure.

 

Fault 6: The vertical direction is missing during the printing process of the barcode printer

Analysis: This may be caused by long-term use of the printer or dust coverage on the surface of the print head

Solution: Clean the print head with alcohol swab first , if it is still abnormal, contact the dealer to replace the print head.

 

Fault 7: All the indicators of the label printer are flashing, and the paper cannot be measured

Analysis: If this happens, it means that the sensor cannot be recognized or is broken.

Solution: Clean the sensor first to remove the dust on the surface. If it cannot return to normal, you need to contact the dealer to replace the sensor.

 

Fault 8: LCD does not display and cannot be operated

Analysis: In this case, the motherboard or EPROM is damaged

Zebra Card Printer Cleaning Card

ZEBRA ZC100 Card Printer Cleaning Card

Posted on by

ZEBRA  ZC100 card printer cleaning card

Selling card printers for nearly 10 years, and has accumulated rich after-sales experience and customer feedback cases.

According to our after-sales statistics, users report that 80% of card printing problems can be solved with cleaning cards.

Used for a long time, there may be some residues and dust in daily life inside the machine.

The card feeding channel is a very important part of all the components of the ZC100 card printer, which will directly affect the printing quality. 

ZEBRA (Zebra) ZC100 card printing belongs to the equipment category, regular cleaning can keep the printer in a better condition and prolong the life of the printer.

Zebra cleaning card is a special cleaning card for ZC100 card printing. It is a cleaning product composed of ultra-pure solvents, additives and composite materials with strong adsorption capacity.

It can Quickly and safely remove dust, oil and other contaminants from the ZC100 card printer.

 Integrity shapes the brand, quality opens up the market. Our company has been committed to providing users with high-quality products and satisfactory services. Yousite specializes in the production of printer consumables . If you have more questions about ZC100 card printer cleaning cards, please contact us.

For the steps of using the cleaning card of ZEBRA ZC100 card printer, please pay attention to our company for more technical news.

Zebra Barcode Printer Cannot Print

Posted on by

Zebra Barcode Printer Cannot Print

When we use Zebra in the barcode printer, there is often no response failure after pressing the print button, so how should we deal with this situation?

Many friends who are not familiar with printers may think that the printer is broken, but this is not the case. The following examples are the common faults that Zebra barcode printers cannot print. Take this as an example and hope it will be helpful to everyone.

 1. One of the most common failures of Zebra barcode printers is that the printer reports an error, and there will be various prompts on it, such as RIBBONOUT and PAPEROUT waiting on the panel.

The problem with this is that you cannot measure paper and ribbon failure. When this problem occurs, the first thing you want to do is to see if the label and ribbon are installed correctly. If it still doesn’t work after eliminating the above problems, then the Zebra barcode printer should perform advanced calibration on the label. If it still doesn’t work, you can restore the factory settings of the printer after knowing the printer parameter settings.

After the above method is used, the error is still reported, which is estimated to be a hardware problem. Please check whether there is dust on the label sensor and ribbon sensor, which can be cleaned with denatured alcohol. If this method still does not work, it is estimated that the main board of the barcode printer is broken. 

2. The second common failure of the Zebra barcode printer is that the printer does not respond after printing, and there is no prompt on the printer screen. It is normal to feed the paper after pressing the paper button, which means that the printer does not report an error and the printer is good, and then the computer interface and data cable. If these two faults are excluded, the motherboard of the barcode printer will definitely be broken. 

3. The third common failure of Zebra barcode printers is that the printer does not light up, the backlight of the screen is on, and the others do not respond. In our professional terminology, the main board does not light up. The only reason for the failure is that the chip on the main board of the printer is burned or short-circuited. The printer power board was working, so it was determined that the main board was bad. 

4. The fourth common fault of Zebra barcode printers is that the printer does not light up, and the screen is completely black. The fault is that the power board is broken, and only one power board is shorted.