Home » Grocery & Big Box Retail Cleaning Card » Page 2

How To Clean A Chip Card Reader

Posted on December 10, 2022May 5, 2023 by Adminsoft

How to clean a chip card reader?

What are the precautions for the use of IC card readers 1. Plug-in card holder

1. For the plug-in card holder, care should be taken to prevent the card from being inserted too hard. Too much force will damage the in-position switch of the card holder, and it will also damage the card to a certain extent.

2. Pay attention to keep the card clean. If the chip of the card is not clean, not only the card will not work normally, but also the contact point of the card holder will be polluted.

3. It is very important to operate after the card is in place. If the reader powers on the card under unstable conditions, it may cause damage to the card.

4. After the operation of the card in the plug-in card holder is completed, the application program should first send a command to the reader to power off the card, and then pull out the card after power off. Pulling out the card without power off may cause damage to the card.

2. Push-push deck

1. The push-push card holder adopts the push-in card, and the card will pop out when the card is pushed in again when it is taken out. This structure reduces the friction between the card and the electric shock, and has certain advantages in protecting the card. But it can also damage the card if not used correctly.

2. The most common error is that when taking out the card, instead of pushing it in again to make the card pop up automatically, and directly pulling the card out, this situation will seriously damage the card and the card holder.

3. Pay attention to keep the card clean. The card holder of any structure will eventually be in close contact with the chip of the card, so if the chip of the card is not clean, it will pollute the contacts of any kind of card holder.

3. The environment and method of using the IC card

Proper storage and correct use of cardholders are the most economical and effective means to prolong the service life and reliability of IC cards. Proper storage, no random bending, no random contact with the contacts, no random access to strong static electricity environment, pay attention to keep the card surface clean, etc., will help to improve the reliability of the IC card and prolong its service life.

4. Use of cleaning card

The cleaning card is a cleaning measure used after the reader has been used for a period of time and the contacts of the deck are polluted. The method of using the cleaning card is: insert the cleaning card into the reader-writer when the power is cut off, and then clean the electric contact of the deck after inserting it back and forth.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

The cleaning card is made of polyester, polyethylene, polypropylene or hard paper.

The base material of the CR80 cleaning card is PVC, and the two sides are laminated with wood pulp polyester spunlace cloth, which is soaked in IPA solution.

Inserted into the card machine, and inserted and pulled out several times to clean the card. It is very convenient to clean the contact surface of the machine, and the effect is obvious, which can effectively ensure the long-term normal operation of the card machine.

How to Clean a Card Reader?

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

1
1. The IC card reader should be placed on a fixed platform, away from strong magnetic fields. The working environment should be kept tidy, and the surface of the machine should be kept clean.
2
2. Do not allow foreign matter to enter the IC card reader from the cardholder entrance. Including water, oil, etc.
3
3. Regularly clean the deck to keep reading and writing correct. Method: Dip the “cleaning card” with a little alcohol, insert it into the card holder, move back and forth, left and right for several times, then pull it out, wait for a few minutes and then use it.
4
4. If the IC card reader is faulty, please hand it over to the maintenance personnel.
5
5. If it needs to be transported, please use the original packaging to avoid severe impact.

Precautions

To prolong the life of the IC card reader, you must maintain the IC card reader.

IC card (Integrated Circuit Card,), also known as smart card, smart card (Intelligent card), microcircuit card or microchip card, etc.

Datacard/Fargo/DNP Compatible Adhesive Cleaning Card

Posted on December 6, 2022May 5, 2023 by Adminsoft

Datacard/Fargo/DNP Compatible Adhesive Cleaning Card
Specifications

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

Adhesive Cleaning Card

Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)

1.Used for Datacard,Fargo,Zebra ZXP3/DNP Card Printers
2.Good Quality and Competitive price

Adhesive Cleaning Card

Description:
Card Readers require preventative maintenance for keeping the Magnetic Heads clean
and debris free from contamination build up.

Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and
increase the service life of the magnetic heads

Features

CR80 is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.

Cleaning Card
-Excellent absorbency than the 100%polyester cleaning card

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.

Electronic-gradeIPA Snap Swab
-Easy,Effective,Safety;

Aluminium Foil
-Strong tightness and keep it longer;

Hot-press compound
-Make sure the most excellent cleaning effect;

Cleaning Wipes kit removes any dust to maintain excellent image quality, ensuring your ID card printer runs smoothly. Printer cleaning consumables.

Presat IPA wipes
-preventive maintenace for your printer.

Zebra Card Printer Cleaning Card

Posted on December 3, 2022May 5, 2023 by Adminsoft

P330i/P120i/P100i Zebra Card Printer Cleaning Card

P330i Printer Cleaning Tutorial

Needed cleaning tools

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

1. Cleaning up card
2. Cleansing IPA swab
3. Cleaning rubber rollers

Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.

Use of cleaning tools

1. Initially open the printer and also obtain the ribbon.
2. Detach the packing bag and also put the cleaning card into the card input box of the printer.
3. Open the properties of the card printer motorist– >; device setups.
4. Select the Devices tab, and click the Printer Cleaning button to clean.

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.

6. Get the cleansing swab, squeeze the cotton bud stick, and let the liquid drain to the head of the cotton swab.
7. Make use of a swab to carefully wipe the print head of the printer (wipe in one direction).
8. Await the liquid to dry and the body cleansing is finished.

Note – Two cleaning cards are needed for the cleaning procedure. A cleansing card coincides in size with a basic plastic card, we call it a “cleaning card”. The various other card is bigger as well as wider at one end, we call it the “Long Cleaning Card“.

Cleaning Process

1. Leave the printer powered on, or transform it on if it is out.

2. You can begin the cleansing procedure with one of the adhering means:
Press and hold the printer’s panel button for a couple of secs up until the message get rid of RIBBONTHEN CLOSE HEAD appears on the LCD.
Go to the P330i Printer Devices software application from your computer system as well as click the CLEAN button. The LCD will certainly show the REMOVE BOW AFTER THAT SHUT HEAD message.

3. Open up the major cover, release the printhead owner, and eliminate the bow. Close the printhead owner. The LCD panel will display the
EMPTY message.

4. Open up the card feeder cover, and afterward remove the card from the card feeder. The last card is tough to get rid of and can be left in the feeder. Press the panel switch on the front of the printer. Cards left in the feeder will be expelled. The LCD panel will certainly display the message tons CLEANSING CARD IN FEEDER.

5. Place the pre-soaked cleaning card right into the card feeder. The cleaning card will immediately be fed right into the printer and the cleaning procedure will certainly begin (there is a hold-up of a few secs after feeding the cleaning card prior to the cleaning step beginning). Throughout cleaning, the LCD will certainly display the message cleansing PRINTER.

6. When this part of the cleansing process is full, the cleaning card will pop out as well as the LCD will certainly present the message PRESS SWITCH TO CONTINUE.

7. After the user presses the panel button, the LCD will certainly show the message FEED LONG CLEANING CARD IN LEAVE. Place the longer end of the lengthy cleansing card into the card leave (located straight over the outcome hopper). When the user inserts a “normal” cleansing card right into the card slot, the LCD will display the INVALID
CARD, PRESS BUTTON message till the individual presses the panel button and also inserts a long card right into the card port.

8. The lengthy cleansing card will be immediately fed right into the printer and also the printing process will begin. The LCD will present the CLEAN PRINTER message once more.

9. When the cleaning procedure is total, the long cleaning card will pop out, and also the LCD will certainly show a READY message, indicating that the printer prepares to resume normal printing procedures.
Note – Two cleansing cards are required for the cleaning process. A cleansing card coincides with size as a general plastic card, we call it a “cleaning card“. The other card is larger as well as broader at one end, we call it the “Long Cleansing Card”.

Keep in mind – If the user does nothing right now (as an example, no lengthy cleansing card put), the LCD will transform to display CLEAN PRINTER after a timeout. The printer can print, however the LCD will remain to display CLEAN PRINTER.
This limited cleaning process does not execute a detailed cleansing. However, it can be done without the “lengthy cleaning card”.
To return the screen to READY, the user is required to perform the complete cleansing procedure from step 2 above with step 9 listed below making use of both lengthy and brief cleaning cards.

10. The cleansing card can just be used as soon as and also must be disposed of after usage.

Product Packaging Information: 25pcs/box.100 boxes/ctn.

Distribution Information:

2-3 weeks for shipment after order confirmation Requirements.

1. Blending polyester, spun shoelace, cellulose, and PVC card.
2. For cleaning impurities from Zebra printers.
3. P330i/P120i/P100i clean.

Description.

The saturated disposable cleaning card: for cleansing effectively dust, magnetic oxides, oils, particles, creams, as well as other pollutants from all kinds of ID card printers, scanners, visitors, and barcodes.

It is an economical way to maintain your card viewers and also boost the life span of the magnetic heads.

Thermal Printer and Check Scanner Cleaning Card

Posted on December 3, 2022May 5, 2023 by Adminsoft

Thermal Printer and Check Scanner Cleaning Card

Detailed introduction to Thermal Printer and Check Scanner Cleaning Card:

Thermal Printer Cleaning Cards were developed to provide a preventive Maintenance cleaning to remove dirt and debris from print heads.

By cleaning Your Thermal Printer on a regular basis you are maintaining the print image, Extending the life of the print head, and will have accurate and readable Print/barcode images.

Cleaning Card width should be determined by the maximum width of your thermal print head.

We can provide various sizes to fit most the thermal printer type. Cleaning cards, ATM/POS terminals cleaning cards Card Reader.

Cleaning Cards, suitable for all card readers, card printers, ATM/POS terminals, petroleum machines, smart cards, etc.

Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads

Thermal printers cleaning cards zebra magicard evolis card printer cleaning card
Card reader cleaning cards will safely and effectively remove dirt, magnetic oxides, oils, lotions, and other pollutants built on the magnetic heads.
Cleaning cards are a cost-effective way to maintain your card readers and prolong the life of magnetic heads.

It will clean:
Swipe ATMs Credit/Debit card readers POS terminals PVC card printer Access control card reader Gas station equipment Pay phones Hotel door locks Parking system equipment IC card readers Smart card readers More manual swipe readers and insertion readers Usage: To clean the swipe readers: Simply swipe the cleaning card through the card reader back and forth,until there are no residues in card reader.
To clean the insertion readers: Insert the cleaning card into the reader,then quit. Repeat this action several times,until there are no residues in card reader. After cleaning, simply dispose of the card. We recommend: Once per day for external or high usage card readers.

Card Readers Cleaning card

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.

Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads Card reader cleaning cards will clean:

Credit & Debit Card Swipe Terminals
POS Terminals
Swipe ATM Machines
Petroleum Pump Card Readers
Credit Vending Machines
Security/Time/Badge Readers
Smart Card Readers
Telephone Card Readers
Slot Machines
Hotel Door Locks
Key Card Readers

Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.

Yousite Examine Scanner cleaning card This Presaturated Cleansing Card is layout to clean effectively as it transfers through the feed course cleaning up the Sensitive Magnetic Heads, Lens, and also Move Rollers. This card protects against processing hold-ups and misreads as it gets rid of contaminants from check viewers/ scanner/MICR feed courses, rollers, as well as heads. A larger Surface Area Cleaning Card with a Broader Width and Longer Size design permitted the Scanner to Clean better and More Effectively. Preventive Upkeep Cleansing Cards have been accepted by OEMs to supply a Positive Cleansing Efficiency and also expand the Life span of the Examine Scanner.

Remove dust, debris, and oils that build up over time during the normal operation of your remote deposit check scanner. Check Scanner Cleaning Kit

Sizes Setup are readily available with a Basic thickness of Tolerance: 0.012″ +/- 0.003″ or (0.305 +/- 0.0762 in mm).

– 2.0 x 6.0 (inches) or 50.8 x 152.4 (mm).
Component Number: CSCC- 0206.
– 2.5 x 6.0 (inches) or 63.5 x 152.4 (mm).
Component Number: CSCC- 2506.
– 4.0 x 6.0 (inches) or 101.6 x 152.4 (mm).
Component Number: CSCC- 0406.
– 4.375″ X 8″ X 0.018″ or 111 X 203 （ mm).
Part Number: CSCC- 437508.
– 4″ X 8″ X 0.012″.
Part Number: CSCC- 0408.
– 4″ X 10″ X 0.012″.
Component Number: CSCC- 0410.
– 4.5″ X 7.25″ X 0.012″.
Part Number: CSCC-45725.

Pre-saturated as well as individually secured.

Lowers residue build-up without taking apart devices.

Quick, easy, economical preventative upkeep.

Application:

Tags and Invoices thermal printer cleansing card, including Receipt Printers/ Upc code Printers as well as Label Printers, and Tickets.
Printers, Airline Boarding Pass Printers, or Readers Cleansing Cards.

– Suggested Use: Once each day in high-use areas and when each week in reduced-usage areas.

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

Posted on November 28, 2022May 5, 2023 by Adminsoft

Card Reader Cleaning Card

For all card readers, ATM/POS/Door Locks, and card printers

1. Introduction:

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo, and optic sensors on all types of reader mechanisms. Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up.

Thermal printers, card printers, and thermal printers, are mainly used for cleaning cards, cleaning pens, and cleaning foam swabs to clean up

Pre-saturated CARD READER Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of magnetic heads. We manufacture a wide range of cards designed to clean card readers and printers!

2. Applications:

（1）. All Card Readers;
（2）. ATM/POS Terminals;
（3）. Petroleum Pump;
（4）. Time/Badge;
（5）. Slot/Vending;
（6）. Optical/Barcode;
（7）. Smart Card;
（8）. Thermal Printers.

3. Recommended usage:

Once per week for internal, low-usage card readers once per day for external, or high-usage card readers.

4. Directions:

（1）.insert head cleaning card into the card reader 5-6 times, in the same manner, you would a regular credit card
（2）. Remove and discard
（3）.repeat step 1and 2 if necessary

POS/ATM Machine CR80 Cleaning Card

Posted on November 25, 2022May 5, 2023 by Adminsoft

POS/ATM machine CR80 cleaning card

CR80 is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors. These alcohol-free cards safely & effectively clean the internal components of the card readers without damaging its belts and rollers, the card provides a one-step and on-the-spot solution for nearly all maintenance.

Product Name:	CR80 Cleaning Card
Material:	White nonwoven fabric/plastic core/white nonwoven fabric
Usage:	For Card printers and Card Readers cleaning
Certificate:	ISO/SGS
Feature:	Pre-saturated with Electronic-grade Isopropyl Alcohol
Quality:	100 % Tested
Color:	White
Size:	54 mm x 86 mm x 0.711mm

ATM swipe dip card readers cleaning card.

CR80 ATM Cleaning cards are designed to remove dirt, dust, oils, and other contaminants from equipment.

The cleaning card is also an extremely fast, economical, and simple means of cleaning equipment.

The many varieties of equipment available have created a need for the cleaning card to become specialized in order to properly clean.

We are the makers of this technology and are committed to helping you find the proper cleaning card for your equipment.

Alcohol-free pre-saturated CR80 Cleaning Cards are recommended for preventive maintenance of ATMs and slot machines.

It is extremely effective for a high level of dirt collection.

The substrate material of the CR80 cleaning card is PVC, ISO coded, flocked on either side, pre-saturated with alcohol-free solution, and pouched in polyester laminated aluminum foil to provide excellent moisture vapor barrier properties.
1. Cleans efficiently due to brush cleaning effect.
2. Fewer machine failures due to effective dirt removal.
3. Easy handling
4. Our proprietary formulated Cleaner Solution is anti-static, anti-microbial, 100% non-toxic, non-flammable, environmentally friendly, and RoHS compliant.

Refer to MSDS. 5. Cleaner is free from Iso Propyl Alcohol, Ammonia, and Sodium Lauryl Sulfate and safely cleans, removes dust, and dirt stains, and leaves no residue on the surface.

ID Card Printer Cleaning Supplies

Posted on November 22, 2022May 5, 2023 by Adminsoft

ID Card Printer Cleaning Supplies

Yousite carries cleaning kits for ID card printer manufacturers including Zebra (Eltron), Magicard, Fargo, Evolis, and Datacard.

ID Card Printer Cleaning Kits · CR80 Cleaning Card · Cleaning Swab · Cleaning Pen · T-XL Long Cleaning Card · Cleaning Wipes.

ID Card Printer Cleaning Kits · CR80 Cleaning Card · Cleaning Swab · Cleaning Pen · T-XL Long Cleaning Card · Cleaning Wipes.

Specifications

1. For all Card Readers, printers
2. Certificate
3. Pre-saturated and individually sealed
4. Reduces residue

Description

Thermal Printer Cleaning Card.

This specially designed cleaning card cleans thermal print heads that are not easily accessible.

The patented pre-saturated thermal printer cleaning card is saturated with 99.9% isopropyl alcohol. The safe, effective, spun-bonded card allows for the total migration of the cleaning solution and will not dry out before it gets the job done. Simply feed the card through the printer as you would any label or ticket stock, and it will remove contaminants from the print head, guide paths, and rollers.

1. Cleans efficiently due to brush cleaning effect.

2. Fewer machine failures due to effective dirt removal.

3. Easy handling

What Is The Cleaning Card For?

Posted on November 21, 2022May 5, 2023 by Adminsoft

What Is The Cleaning Card For?

The Cleaning Card is essential to the consistent credit card and the debit card reads on your POS Terminal. A credit card has oils and dirt on its surface. With every swipe into your credit card reader, these contaminants are transferred into the card reader and onto the magnetic heads.

This accumulation of dirt and oils is 80% of the reason why these readers fail.

Every time a credit card transaction has manually entered the fees for that transaction are increased by as much as 2%.

The increase in fees and the time it takes for an employee to enter the number manually are essentially eliminated for a fraction of the cost with regular preventive maintenance.

The use of cleaning cards will prolong the life of the reader.

Widely used in various types of card printers, POSE machine card inlet cleaning, hotel access control system cleaning, IC card refueling machine cleaning, automatic ticket machines, etc.

Used in the cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health, and various public places.

It is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

For Credit Card Readers

Designed to thoroughly clean the reading mechanism for credit card readers. A regular preventative maintenance program will eliminate misreads and keep customers happy. Available in both flat and waffle styles.

For Printheads

Designed to remove build-up and contaminants on the thermal printhead within the printer.

When cleaning the card printer, first open the printer to take out the color ribbon, then tear off the packaging bag, and put the cleaning card into the card input box of the printer. Open the printing preferences of the card printer driver, select the Tools tab, and click the Printer Self Cleaning button to clean. The card is automatically ejected after cleaning is completed.

Take out the cleaning swab, squeeze the stick of the cotton swab, and let the liquid flow out to the head of the cotton swab. Use a cotton swab to gently wipe the printer’s print head (wipe in one direction). Wait for the liquid to dry and the cleaning is complete.

Magicard Turbo Cleaning Kit #N9003-564MED. 50 cleaning cards; 3 printhead cleaning pens; For Magicard Turbo printers. All Magicard Printers.

And the static electricity generated by the machine equipment will attract dust to adhere. Those card reader devices will fail to read the card or in case of failure.

Therefore, it is necessary to perform manual maintenance and cleaning from time to time. But simple manual maintenance and cleaning are time-consuming and labor-intensive.

It is also expensive, and the cost performance is very low.

Yousite company has produced a cleaning product, mainly used to clean various card reader equipment. Just insert the cleaning card into the machine equipment, and it can effectively clean the inside of the card reader several times in a row, and clean the card reader. The material is microfiber, which will not cause damage to the inside of the card reader. It is cheap and easy to use. If you have relevant needs, please contact us in time.

Evolis & Datacard Cleaning Kit

Posted on November 19, 2022May 5, 2023 by Adminsoft

Evolis & Datacard Cleaning Kit

Using our years of experience selling and servicing card printers, Yousite company has put together a set of printer cleaning kits that work as well as the name-brand kits, but cost a lot less!

The cleaning kit works with several Evolis card printers, including Evolis Tattoo, Pebble, Dualys, Securion, and Quantum printers, as well as Datacard SP and SD printers including Datacard SD260, SD360, SP35, SP55, and SP75 printers.

This printer cleaning kit by Yousite includes:

Evolis & Datacard Cleaning Kit Adhesive Cleaning Cards, Snap Swabs, Pen, and Wipes.

Thermal Printer Cleaning Pen – Use the precise tip on this cleaning pen to remove ink and contamination buildup on your thermal printhead.
Snap Swabs – Featuring spatula foam tips and a plastic reservoir filled with isopropyl alcohol, these swabs thoroughly clean your printhead.
IPA Cleaning Cards – Coated with isopropyl alcohol, these cards should be run through your card printer every 1,000 card prints to remove dust and debris from your card transport rollers, clearing your print path.
Wipes – Pre-saturated with cleaning fluid, these wipes remove debris from your paint rollers.

		Wide Adhesive Card support machine models: JVC series card printers such as CX320/CX330, CX7000, XID8300, UV900, XID9300, 580ie; Prima4, etc.
		Small cleaning card Supported machine models: Zebra’s P310, P420, P330i/P430i (need to be used with large cards); DataCard’s SP35, SP30 series card printers; Evolis’ pebble3/pebble4 series card printers; Magacard’s various card types printer.
		Long cleaning card Supported machine models: Zebra’s P330i/P430i (need to be used with short cleaning cards) and other ZXP series card printers; MagaCard’s Enduro, Rio Pro series card printers.
		Long adhesive card Supported machine models: Fargo HDP5000, HDP600, C30e, DTC, Evolis series card printers.
Adhesive Cleaning Rollers		Cleaning Rollers Used for Zebra P series card printer cleaning wheel; special cleaning wheel for MAgCard; special cleaning wheel (cleaning roller) for DataCard.
		Advanced Cleaning Kit (full printer cleaning) Presaturated T-cards, laminated cards, cleaning pens, presaturated cleaning wipes for the new Evolis card printers Zenius, Primacy and Elypso.

Cleaning Cycle For Datacard CP40, CP60 and CP80 Card Printer

Posted on November 17, 2022May 5, 2023 by Adminsoft

Cleaning cycle for Datacard CP40, CP60, and CP80 card printer.

Datacard CP40, CP60, and CP80 series card printers need to clean regularly. It is recommended to clean before a ribbon change or the print quality is poor. You need to prepare Yousite cleaning kits compatible with Datacard: 1 x CR80 cleaning card, and 1 x cleaning sleeve.

Entrust Datacard SP25/35/55/75/CP40/CP60/CP80 Plus Series Cleaning Supplies.

Cleaning The Printer. Run a cleaning card and change the cleaning sleeve when changing the print ribbon.

Then run the cleaning cycle as follow:

1.    Open the printer cover, remove the print ribbon cartridge and remove the cleaning roller.
2.    Remove the blank card stock from the input hopper.
3.    Open the cleaning card package and remove the cleaning card.
4.    Insert the cleaning card into the printer.
5.    Select the “Cleaning Card” option and press the “enter” button.
6.    When the cleaning cycle has been completed, replace the ribbon, replace the cleaning sleeve, and remove the protective paper, then place it back in the printer.
7.    Close the cover and you are ready to print.
For more cleaning kits information. Email(beck): beck@yaostbio.com