How To Clean The Zebra P330i Card Printer?

Posted on November 17, 2022November 17, 2022 by Adminsoft

How to clean a zebra p330i card printer?

After printing 1000 color cards or 5000 monochrome cards, the Zebra P330i LCD will display “cleaning printer”.

And you should clean the printer as soon as possible to ensure good print results.

Then this is a problem, how to clean the Zebra P330i card printer?

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

Steps for cleaning Zebra P330i:

1. Leaving the printer on, press and hold the button for three seconds, the LCD will now display “remove ribbon then close head”,

2. Open the printer lid, lift up the print head carriage then remove the ribbon spools and close the print head carriage. After the ribbon is removed, the LCD will display “MD feeder, and press the button”.

3. Open the card feeder lid and remove all but the bottom card. This card should remain in the feeder until you press the button to eject it from the printer. Do not attempt to pull the card out, or you may damage the feeder.

After the card is removed, the LCD will display” load cleaning card in feeder”.

4. Remove the small cleaning card from its packaging and place it in the car feeder, the feeder belt will move the cleaning card halfway into the feeder.

This is the correct position, do not try to force the card fully into the printer. Once the card cleans the feed belt, it will move through the printer and continue cleaning other components, the LCD will display “cleaning printer” during this process.

After the cleaning card is finished, it will automatically be ejected, the LCD will then display “press button to continue”.

5. Remove the long cleaning card from its packaging, press the button and the message will change to “feed long cleaning card into exit”. Now insert the long cleaning card into the printer exit slot, the long cleaning card will automatically move back and forth as it cleans. The LCD will again display “cleaning printer” during this process.

6. Once the long cleaning card has been ejected, the LCD will change to “ready”. Now you can reinsert the ribbon spools, reload cards and resume printing if you still see spots in your cards after cleaning the printer, you may want to clean the printhead to remove deposits.

7. Before cleaning the print head, turn the printer off, lift the carriage and remove the print ribbon. Then squeeze the plastic stick on the cleaning swab to push the liquid into the tip, now gently move the moistened swap side to side across the printhead elements.

8. Wait two minutes for the print head to dry. Turn the printer back on, and reinsert the ribbon spools.

Consistent and routine cleaning of your printer will maximize print quality and prolong the life of critical printer parts.

Multi-function Cleaning Wipe -IPA

Posted on November 17, 2022November 18, 2022 by Adminsoft

IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

Multi-function cleaning wipe -IPA

The use of cleaning wipes is very wide, not only can be used for card printers, and thermal printers to wipe the print head, machine body,
but also can be used to wipe the phone, computer screens, and so on.

In addition to cleaning can also be used for the above places can also be used for a lot of places clean wipes.

Multi-function cleaning wipes.

IPA-M3 size: 127mm * 152mm.

containing 99.9% IPA solution, the use of tin foil bags (to avoid IPA volatile) independent packaging.

Store in a cool place, with a shelf life of 2-3 years.

Yousite is the direct manufacturer of clean wipes, clean wipes production is made by hand.

Each process has professional monitoring and control and strives to do all excellent products.

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable)

Posted on November 17, 2022November 17, 2022 by Adminsoft

Pre-saturated IPA Snap Swab(3″/4.5″ are avialable).

IPA-4.5 Snap swab – 4.5″. Pre-saturated IPA Snap Swab(3″/4.5″ are available). The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

The Plastic Handle on these Swabs is filled with 99.9% IPA Solution.

Simply Squeeze or Snap the Plastic Handle and the Foam Head becomes saturated with just the right amount of Cleaning Solution.

Clean the Thermal Print Head by using a back & fourth motion to effectively remove dirt and debris accumulated on the print head thus extending the life of the print head and maintaining a readable image.

Thermal Printer Pre-saturated IPA Cleaning Swab

Lint free, non-abrasive, and pre-saturated with 99.7% IPA (isopropyl alcohol), the foam tips will thoroughly but gently clean delicate parts.

Available in 2 Sizes: 3.0” or 4.5”
Packing: 25 Swabs per Ziplock Bag; 50 Swabs/Box
Part Number: IPASS-3.0 and
Part Number: IPASS-4.5 respectively.

Features:

100 PPI, Open Cell Polyurethane Rectangular Foam Tipped. Non-Abrasive.
Typical Applications: Computer Keyboards. Optical and Magnetic Head Devices. Electronic Components.

Thermal Printer Pre-saturated IPA Cleaning Swab

Posted on November 17, 2022November 17, 2022 by Adminsoft

Thermal Printer Pre-saturated IPA Cleaning Swab

Specifications

-isopropyl alcohol clean swab;
-.Single packed;
-.For ZXP3/7/8, P330i, P330m & P430i printers;
-.NO MOQ;

-FREE SAMPLES

1. Put Quality as the first consideration;
2. Rich export experience of more than 10 years in manufacturing and selling cleanroom and esd products.
3. OEM & ODM, customized design/logo/brand and packaging are acceptable.
4. Advanced production equipment, strict quality testing, and control system to make sure superior quality.
5. Competitive price: we are a professional cleanroom/ESD products manufacturer in China, there is no middleman’s profit,
and you can get the most reasonable price from us.
6. Good quality: We have ISO certification, good quality can be guaranteed, and it will help you keep the market share well.
7. Fast delivery time: we have our own factory, which saves your time to discussing with the trading company, we will try our best to meet your request.

IPA Snap Swab

Posted on November 17, 2022November 24, 2022 by Adminsoft

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to kill bacteria & viruses · Disinfects small & difficult to reach electronics.

IPA alcohol cleaning swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

SNAP Swabs 4.5″ IPA Filled Reservoir Handle (50 swabs)TDS Download

1. For cleaning contaminants from printers
2. 2-3ml 99.9% IPA solution
3. Aluminium Foil Packing

Description

Evolis A5003 Cleaning kit IPA Self-saturated alcohol foam swab. Includes 25 cleaning swabs with a spatula foam tip and isopropanol;

Yousite IPA Snap Swabs are specially designed for cleaning effectively dirt, magnetic oxides, oils, debris,
lotions and other contaminants from all kinds of ID card printers, scanners, readers, and barcoders.
It is a cost-effective way to maintain your card readers and increase the span life of the magnetic heads.
IPA snap swab is one of our card reader Cleaning kits products which also contains cleaning cards,
adhesive cleaning tacky rollers, IPA wipes, and cleaning pens for all kinds of different printers such as Zebra, Magicard, Fargo, Datacard, Evolis, EDI, etc.

Features

Cleaning Card

-Excellent absorbency than the 100%polyester cleaning card.

Electronic-grade IPA Snap Swab.

-Easy, Effective, and Safety.

Aluminum Foil.

-Strong tightness and keep it longer.

Hot-press compound.

-Make sure the most excellent cleaning effect.

Present IPA wipes.

-preventive maintenance for your printer.

Thermal Printer Head Cleaning Pen 99% IPA Solution

Posted on November 16, 2022June 23, 2023 by Adminsoft

The IPA cleaning pen is specially used to clean the thermal print head of all thermal printers, including card printers, barcode printers, label printers, receipt printers, Kiosk printers. It is used to remove ink, dirt, and contamination built up on a thermal printer’s print head.

How do you use a thermal printer cleaning pen?

To clean thermal print heads, swipe the cleaning pen across the entire print head surface. Adding a little pressure as you move the pen across the print head will gently scrub off the burnt-on particles. Repeat if necessary. To clean the pen tip, wipe across the clean paper surface.

【1】.Products Description Cleaning Pen

IPA Printhead Cleaning Pen Holder is filled with 99.9% electronic grade IPA solution.

A.Cleaning pens prolong equipment life and reduce maintenance costs. They remove contaminates from transaction equipment, which have been proven when used regularly they save money.
B.Regular Cleaning extends the service life of the print head and provides a better graphic image quality.

99% IPA Solution Thermal Printer Head Cleaning Pen

【2】.Technical Specification

1. Barrel Length: 143mm;
2.Packing:12 pieces per box;
3. Barrel Diameter: 14.3mm;
4. IPA Volume : 5.0 +/- 0.5 ml;
5. Printhead, PCB, IC, SMC, etc.

IPA cleaning pen is a reusable option for cleaning the thermal print head, each pen can be used 6 to 10 times. After each use, you can scrape the nib on a white clean paper to remove the ink residue on the nib for reuse next time.

【3】.Products Application

All ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print Heads.
All types of thermal printers.
Brand ID card printers: Zebra, Fargo, Magicard, Evolis, etc.
Pcb, IC, cleaning fields.

Used for Routine Preventive Maintenance Cleaning on all types of ID Card Printers and Barcode, Label, and Receipt Thermal Printers Print heads.

99% IPA Solution Thermal Printer Head Cleaning Pen Kits

【4】.Directions

1. To clean the pen tip, wipe across the clean paper surface. Recommended usage is every time a new roll of labels or thermal is needed OR to correct lines or imperfections in the printed copy
2. Repeat if necessary.
3. To clean thermal print heads, swipe the cleaning pen across the entire print head surface.

CR80 Card Reader Cleaning Cards

Posted on September 12, 2022June 23, 2023 by Adminsoft

There are different types of printers, such as thermal printers, inkjet printers, card printers, etc. Thermal printers are mainly cleaned with cleaning pens and cleaning swabs, while card printers and inkjet printers can be cleaned with cleaning cards. There are many cleaning card manufacturers on the market now, how to buy a dedicated printer cleaning card?

In general, each type of printer has different models, and the inlet and outlet of the printer also have different widths, so a corresponding printer cleaning card is required . Some friends will ask, can’t I make a card of the same size to clean it?

This question is obviously very easy to answer. When we clean the printer, compared with the professional cleaning card, the special printer cleaning card can not only stick dust, but also use IPA soaking card for secondary cleaning. The effect is that other products cannot Competitive .

Yousite company professional card reader cleaning kit

A card reader is a type of electronic device that specializes in reading various magnetic cards, such as ATM card readers, POS machines, card readers and other equipment. It is very common and practical in daily life, precisely because this kind of equipment is common and used frequently, if it is not maintained and cleaned, it is inevitable that there will be problems such as insensitivity of card reading or other malfunctions. Therefore you need professional card reader cleaning products.

card reader cleaning card

Here I recommend the CR80 cleaning card , IPA soaked cotton swabs , cleaning wipes and other set products specially produced by Shenzhen Yousite company . The CR80 cleaning card is used to clean the card slot of the card reader. Just put the cleaning card into the card slot, and it can be cleaned easily after repeated several times. The soaked swab can be used to clean some hard-to-touch parts. The cleaning cloth is mainly A simple cleaning of the surface of the card reader. The combination of these products can provide simple, convenient and effective maintenance for various card reader equipment, greatly prolonging the service life of the equipment and reducing the probability of failure. If you need it, please contact the relevant sales personnel of Yousite Company immediately, and we will serve you at any time.

Universal Cleaning Card For All Card Reader

Posted on July 12, 2022May 5, 2023 by Adminsoft

The card printer cleaning card is very important to the maintenance of the card equipment. Generally, during the printing process, the equipment itself must be cleaned after a fixed number of finished products are printed.

Generally, there are 54*86mm soaked IPA cleaning cards, 3M sticky cleaning cards, and T-type or I-type long cards for overall cleaning of the transmission wheel.

CR80 Universal Cleaning Card

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

CR80 Card Reader Cleaning Card has a wide range of uses, and can be used for cleaning ATM machines, POS machines, subway top-up machines, thermal punch-in machines, card readers, hotel access control systems, top-up machines, gas station IC cards and other products.

These machines will be insensitive to card reading during frequent use, because they are affected by dust, particles and other pollutants. Many people in U.S. still use the oldest cleaning method. Professional maintenance personnel open the machine for maintenance, and the maintenance cost is very high. , Some even directly replace the system that cannot read the card, which causes a very high cost.

The cleaning card solves the maintenance troubles of non-professionals. It can quickly remove dust and other pollutants from the machine, save time and effort, and bring the machine back to life when the machine fails. It is a good product and has a future. The market for cleaning cards and cleaning kits in foreign countries is very large. There are still some concepts that have not changed. Most people are professionals to maintain and clean with a brush, which is easy to cause damage to the sensitive read-write head, and the gain outweighs the gain.

But now many manufacturers of card machines are beginning to realize this, and more and more people will rely on cleaning cards, making the cleaning cards fully functional!

In order to improve the cleaning effect, our cleaning cards are generally soaked in IPA solution, which not only can quickly remove the dust, but also evaporates quickly, and there will be no residual substances attached to the equipment.

Cleaning ATM Machines Cleaning Cards

Posted on June 12, 2022May 5, 2023 by Adminsoft

Cleaning ATM Machine Cleaning Cards Card Reader Cleaning Kits

Financial instruments, especially ATM and point-of-sale maintenance are critical, Yousite company ATM cleaning kit will not damage counter card readers as isopropyl alcohol product is too strong, which can damage the machine over time.
Yousite company ATM machine cleaning card is simple and easy to use, open the package, take out the ATM cleaning card soaked in solvent and directly clean the ATM or poss, it can be used for multiple cleaning

Financial Cleaning Supplies ATM Card Reader Cleaning Cards

ATMs are everywhere, and magnetic card readers in ATMs are also widely available. Dirt and dust can get trapped in the card reader, causing it to malfunction and errors. Help keep your ATM up and running with proper cleaning and maintenance. The ATM card reader cleaning card produced by Yousite company is a kind of financial cleaning consumables for chemical-free cleaning and better maintenance of ATM card readers.

How To Clean And Maintain Card Reader Equipment?

Card Readers require preventative maintenance for keeping the magnetic heads clean and debris free. CR80 cleaning card.

ATM card reader cleaning card

ATM machine cleaning card CR80 is a kind of cleaning product. Made of PVC material and spunlace cloth at high temperature and processed by high-tech production technology.

Soaked in different solvents and can quickly and safely remove precision. Dust, oil and other dirt on electronic equipment. Electronic instruments, instruments and parts can effectively prevent program disorder. Abnormal operation, control failure, performance degradation, PCB corrosion and other hazards.

Widely used, such as: ATM automatic terminal, POS card reader, magnetic stripe card reader, smart card reader, hotel access control system, gas station, self-service vending machine, etc.

Zebra Evolis Printhead Cleaning with Solution CR80

Posted on May 5, 2022May 5, 2023 by Adminsoft

Zebra Evolis Printhead Cleaning with solution CR80 Thermal Printer Cleaning card

Product Name: Card Printer ATM Machine Swipe Machine Cleaning Card;

Product Model: CR8O Cleaning Card Product Material: PVC card + non-woven fabric;

Commodity Efficiency: Can quickly remove dust, oil and water, even parts that cannot be touched by hands Clean and clean

Packing method: Neutral packaging, aluminum foil bag Sealed packing: 50 pieces/box 2500 pieces/box 50 boxes/box

Product specifications: 85mmx54mmx0.711mm (length x width x thickness) (General card printers card machines ATM machines can Applicable)

CR80 cleaning card aluminum foil bag sealed independent packaging, easy to tear, easy to carry

Our material is Blend cellulose polyester spunlace, not 100%polyester.

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

Sorbency is excellent . Volatile time is longer.
Cleaning Card CR80
50 Cleaning Cards Per Box
54 X 85 X 0.711 mm
Part Number : CR80
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up. Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads