How To Clean Credit Card Chip Reader Machine?

Posted on April 6, 2023November 27, 2023 by Adminsoft

Cleaning a credit card chip reader is important to ensure it functions properly and reads cards accurately. Here’s a simple guide on how to clean a credit card chip reader:

Materials Needed:

Isopropyl alcohol solution (at least 70% concentration): Isopropyl alcohol is an effective disinfectant and evaporates quickly, making it suitable for electronic components.
Lint-free cloth or cotton swabs: These are ideal for applying the alcohol and cleaning the chip reader without leaving lint or fibers behind. Printhead Cleaning Wipes
Compressed air (optional): This can be used to remove dust or debris from the chip reader.

Steps:

Power Off the Device:
- Before cleaning the chip reader, power off the device to ensure safety.
Remove the Card Reader Cover (if applicable):
- If the chip reader has a removable cover, carefully remove it. Be sure to consult the device’s user manual for guidance on removing any parts.
Dampen the Cloth or Cotton Swab:
- Moisten a lint-free cloth or cotton swab with the isopropyl alcohol. Make sure it’s not dripping wet, but damp enough to clean the surface. Cleaning Printhead Swabs
Wipe the Chip Reader Surface:
- Gently wipe the surface of the chip reader with the damp cloth or cotton swab. Pay attention to the chip slot and surrounding areas where dirt and debris may accumulate. Ensure that no alcohol seeps into the device.
Use Compressed Air (Optional):
- If there is visible dust or debris in hard-to-reach areas, you can use compressed air to blow it away. Hold the device in a way that prevents debris from being blown deeper into the reader.
Allow Time to Dry:
- After cleaning, allow the chip reader to air dry thoroughly before reassembling or turning it back on. This should only take a few minutes as isopropyl alcohol evaporates quickly.
Reassemble and Test:
- If you removed any covers or components, reassemble the chip reader as per the user manual. Once assembled, power on the device and test the chip reader with a card to ensure it reads accurately.

IPA Cleaning Wipes

IPA solution alcohol cleaning wipes is an industrial life dual-use cleaning consumable product produced by Shenzhen Yousite Technology Co., Ltd. This cleaning wipes is soaked in IPA alcohol cleaning solution in advance, and then processed through the hot-pressing sealing process, which is very convenient to use right away.IPA wipes are used for cleaning in cleanrooms and other controlled environments because of their enhanced ability to clean a wide range of contamination from critical surfaces, and the isopropyl alcohol evaporates quickly. They remove dust, grease and fingerprints, and are particularly effective on stainless steel.
Dry the machine: After cleaning, make sure the machine is completely dry before turning it back on. You can use a dry cloth to wipe away any excess cleaning solution.
Test the machine: Once the machine is dry, turn it on and test it to make sure it’s functioning properly. You can use a test credit card to ensure the chip reader is reading the card accurately.

Additional Tips:

Frequency: Clean the chip reader regularly, but avoid excessive cleaning, as this may cause unnecessary wear on the device.
Avoid Harsh Chemicals: Stick to isopropyl alcohol as it’s safe for electronic components. Avoid using water or harsh cleaning agents that could damage the chip reader.

Remember to clean your credit card chip reader machine regularly to keep it functioning properly and ensure accurate readings of credit cards.

HiTi CS-290e Card Printer Cleaning Steps

Posted on February 11, 2023February 11, 2023 by Adminsoft

HiTi CS-290E cleaning operation steps

1. First find the printer icon in the computer’s equipment and printers, right-click the mouse to print preferences.

2. After the printing preferences are opened, select the tool item and click the cleaning tool.

3. The cleaning step will be started, take out the ribbon in the machine according to the prompt and keep the ribbon door open.

4. Click Next, tear off the 3M film of the cleaning card according to the prompts, and then put it into the card box.

5. Click Next to start the cleaning procedure.

6. The cleaning card will automatically enter the machine for cleaning.

7. The cleaning card will come out from the outlet, click Finish to complete the cleaning.

HITI Cleaning cards kits:

To guarantee a perfect function of the HITI CS200e & HITI CS220e card printer, your printer should be cleaned after 1000 card prints at the latest.

Cleaning can be started at the printer or via the device driver.

This will remove any dirt and dust that has entered the printer over time. Dirty rollers can no longer transport the cards properly in the card printer.

For Hiti Adehisive Cleaning Card Use In Hiti Cs200e Cs220 Cs200 Cs290e Id Card Printer , Find Complete Details about For Hiti Adehisive Cleaning Card

Cleaning pens: These can be used to clean the Hiti print head from dust and ribbon residue. Please proceed very carefully here, as the print head is extremely sensitive and very expensive. Cleaning pens can be used several times.

Cleaning sticks: These are designed to clean the Hiti printer in hard-to-reach areas and to clean the print head on re-transfer printers. Pressing on the style activates the cleaning fluid.

Application Range of Card Printers

Posted on February 11, 2023February 11, 2023 by Adminsoft

Specifications for the use of card printers

In daily life, there will always be small problems of this kind in electronic equipment, and the card printer is no exception. If we can pay attention to some small details of protection during the cleaning process of using the card printer to make the application more standard and effective. then It can also prolong the service life of our card printer and maintain it better. Here are some application standards of card printers and some tips during use!

Card printer specification:

1) In any case, prevent dust, dirt, food, liquid, etc. from entering the printer.

2) Do not open the top cover in most cases unless the ribbon is replaced.

3) Store consumables (ribbons, cards, etc.) in their packaging until ready to use.

4) Do not use contaminated consumables.

5) Store all consumables in a clean, cool, dry place.

6) Please put the paper and non-material into the printer in a hurry.

7) Do not block the power fan or exhaust hole at the rear of the printer.

8) Place the printer on a stable platform, not on the floor.

9) When placing the printer, keep it away from the exhaust vent (heating pipe, bellows port).

10) Do not use the printer to do things outside its scope of application.

11) When cleaning around the printer, close the cover to prevent debris from entering the printer.

12) Place the printer in a clean office environment and protect it from collisions.

Precautions for using the card machine:

1) Please turn off the power before plugging and unplugging the printing cable of the card printer, so as not to burn the data transmission port of the printer and the printing port of the computer;

2) Be careful not to hit the print head with hard objects when changing the ribbon or cleaning the printer, because the surface of the print head is hard and brittle and easy to be damaged;

3) Do not scrub the card printer with corrosive substances (such as Thinner), and do not use alcohol to clean the card wheel and print head of the printer for a long time;

4) If there are small spots on the printed card, pay attention to clean the card surface or the cleaning wheel inside the machine;

5) If the card printer stops moving for a long time during the printing process, click the computer screen with the mouse;

6) After using the card printer every day, turn off the power of the external power supply to ensure that the power supply is well grounded. If possible, use UPS to ensure the stability of the power supply.

7) The card printer must be cleaned once after printing a thousand copies with a color ribbon, and it needs to be cleaned when using a black ribbon (it is recommended to clean the printer every time the ribbon is replaced).

8) During the cleaning work, it is necessary to use professional cleaning cards for cleaning work, instead of using alternative or white cards for cleaning work. Otherwise, the cleaning work will seriously affect the print head.

The cleaning card can only be used once. It is also necessary to use a special cleaning swab / cleaning pen when cleaning the print head .

How Do You Clean Printer Labels?

Posted on January 28, 2023January 28, 2023 by Adminsoft

When you use a barcode printer, you often encounter some problems. Come and see if you have encountered the same problem, let us solve it together?

1. Ribbon deviation during printing: the main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor cutting quality of the ribbon.

2. The printing is not clear and the quality is poor: there may be the following reasons: (1. The temperature of the print head is too low or the print density is too light; 2. The print head is not installed correctly; 3. The print head needs to be cleaned)

3. There is always a shallow thin line on the label printed by the printer: If your printer has such a problem, it proves that you have not done enough to maintain the printer.

When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.

If the printer punches a card and a large area of the card is not printed, there are two possibilities:

1. The print head is seriously damaged.

2. The data cable of the print head is damaged. (The damage of the print head is irreparable. In this case, only a new print head should be replaced.)

The way to avoid this situation is to:

1. Pay attention to cleaning the printer regularly.

2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions).

3. Be careful not to touch the print head when opening or closing the case cover.

4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).

4. Occasionally, some spots will appear on the label printed by the printer: 1. If there are some spots on the card you printed out, it is because there is dust in your printer, which needs to be cleaned in time.

It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage. 2. If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head. 3. The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (each card should be wiped with an eye cloth before printing), so that the printed card will not be flawed.

5. How to solve the problem of ribbon wrinkling

Reasons: 1. The carbon ribbon is not correctly wrapped around the machine; 2. The temperature setting is not correct; 3. The pressure and balance setting of the print head is not correct; 4. The media is not correctly set to feed the paper.

Solutions: 1. Reinstall the medium correctly; 2. Adjust the printing temperature to meet the printing requirements as much as possible; 3. Reset the lower pressure required for printing; 4. Reset the correct paper feeding amount of the medium.

If you have other questions, you can log in to our official website and get in touch with us: barcode printer

Clean the barcode printer regularly to ensure the printing quality:

1. When doing other things to expose the print head, remove rings, watches, long necklaces, status cards and any metal objects that touch the print head. Do not turn off the power of the printer when it is exposed near the print head, but to ensure stability. We recommend that you turn off the power. If the power is turned off, the user will lose temporary settings such as label formats and must reload these settings before resuming printing.
2. Only the designated cleaning agent should be used.

Steps to clean the barcode printer card:

1. Turn the power switch to the “ON ( | )” position, then press and hold the multi-function button for 5 seconds.
2. At the beginning of cleaning, the message REMOVE RIBBON THEN CLOSE LID will appear on the LCD.
3. After the ribbon is taken out and the cover is closed, the message EMPTY FEEDER THEN CLOSE COVER will be displayed.
4. If the lid is opened without removing the ribbon and then closed, the REMOVERIBBON THEN CLOSE LID message will continue to be displayed.
5. After removing the ribbon and closing the cover, the firmware will eject the unique card in the printer. The audio EJECTING CARD will be displayed.
6. The LCD will then show FEED LONG CLEANING CARD . In response to a cleaning card, the rollers feed the card into the printer.
7. When the card ejection sensor no longer detects the long cleaning card, the message INSERT FEEDER CLEANING CARD will be displayed. Open the feeder cover and insert the feeder cleaning card.

China Cleaning Card Manufacturers & Suppliers Wholesale

Posted on January 19, 2023January 19, 2023 by Adminsoft

The printer cleaning card has a wide range of uses. Whether it is in life or industrial production, it is very convenient for us to prepare the printer cleaning card in advance. Due to the rapid development of the Internet, many friends are also good at purchasing on the Internet, hoping to quickly find wholesalers of printer cleaning cards.

How to quickly find printer cleaning card wholesale manufacturers?

Cleaning Card production workshop

Perform a quick search to find the product you’re looking for.

Under normal circumstances, search engines will have many manufacturers to display for you to choose from.

As the sales director of Yousite, we hope that you may wish to compare with our products when purchasing printer cleaning cards.

As a professional wholesaler of printer cleaning cards in China, Shenzhen yous definitely has a good advantage in the production of purification cleaning cards and printer cleaning cards.

From the selection of raw materials to the processing and production of crafts, we are checking every link step by step.

The company’s leadership has always required the production workshop to “not purchase unqualified raw materials and not make unqualified products”, which has become the motto of every Yousite employee to a certain extent.

How to use the card printer cleaning card?

card printer cleaning kits

The cleaning card is a cleaning product processed by high-tech production technology. It can quickly and effectively clean up the dust, oil and moisture on the surface of electronic instruments, meters, precision instruments, printers and other equipment. Let’s take a look at the printer cleaning card. usage method.

How to use the printer cleaning card: Tear open the notch of the packaging bag, take out the cleaning card, insert it into the slot of the card reader, and then enter the automatic cleaning state.

Guidelines for the use of printer cleaning cards: 2-3 times/day in a high-density dusty environment; 1-2 times/day in a medium-density dusty environment; 1 time/day in a low-density dusty environment.

Precautions for using the printer cleaning card: Do not approach fire or heat sources when using it.

How To Clean A Barcode Printer?

Posted on January 17, 2023January 28, 2023 by Adminsoft

We often use barcode printers in our office life, but we often ignore the maintenance of the printer. In fact, doing a good job of cleaning will greatly improve your work efficiency. Let’s take a look at how to clean it!

1. Cleaning of the print head

　To clean the print head regularly and regularly, cleaning kits can use cleaning swab and alcohol. Turn off the power of the barcode printer, keep the same direction when wiping (to avoid dirt residue when wiping back and forth), turn up the print head, remove the ribbon and label paper, and use a cleaning swab soaked in print head cleaning solution (or cleaning wipes ) ), wipe the print head lightly until it is clean, and then gently dry the print head with a clean cotton swab. Keeping the barcode print head clean can get good printing effect, and the most important thing is to prolong the life of the print head.

Printhead Wipes & Cleaning Swabs for Printers

Use a cleaning swab or a swab dampened with isopropyl alcohol to wipe the print element from top to bottom. Also rotate the rollers and clean the platen thoroughly with a cleaning swab. You can use cleaning cards and cleaning pens instead of cleaning swabs, which can better remove stubborn dirt.

Printhead Cleaning Pen with Chisel for Quickly Removing Contaminants from Thermal Printers Including Label Printe.

2. Cleaning of the sensor

　　The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The sensor includes a ribbon sensor and a label sensor. See the instruction manual for its location. The cleaning method is to wipe the sensor head with a cotton swab soaked in alcohol, and then dry it.

3. Printer glue stick cleaning

The printer glue stick can improve the printing effect. During the printing process, the label paper will leave a lot of powder on the glue stick. If it is not cleaned in time, it will hurt the print head. Cotton swabs and alcohol can be used to clean the glue stick of the printer. After cleaning, it must be wiped dry.

4. Printer roller cleaning

After cleaning the print head, clean the rollers with a cotton swab (or wipes) soaked in 99.9% alcohol. The method is to rotate the roller by hand while scrubbing, and then dry it after it is clean. The cleaning interval of the above two steps is generally once every three days. If the barcode printer is used frequently, it is best to clean it once a day.

5. Drive system cleaning

Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission, and there is dust, which directly affects the printing effect, so it needs to be cleaned frequently. Usually once a week, the method is to use a cotton swab (or cotton cloth) soaked in alcohol to wipe the shafts of the transmission, the surface of the channel and the dust in the chassis, and then dry it after cleaning.

6. Clean the paper feed guide

There are generally no major problems in the guide groove, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it must be cleaned in time. When cleaning, just pull it out with a finger.

How To Clean A Thermal Printers(video)?

Card And Smart Card Reader Cleaning Cards

Posted on January 12, 2023May 5, 2023 by Adminsoft

Card And Smart Card Reader Cleaning Cards

Product Name: Printer Head Cleaning Card for ATM/Card reader/Printer

These double sided pre-saturated Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides and other contaminants that build up on magnetic and optic reader heads.

Cleaning Cards for Magnetic Stripe Credit Card Readers

Card readers require preventive maintenance to keep the heads clean and debris not build up from contamination. Presaturated cleaning cards are a cost-effective way to maintain readers and extend head life.

They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.

·Presaturated magnetic head cleaning cards.
·Presaturated cards instantly clean heads on point-of-sale credit card readers, access control/ID card readers and all open systems.
·Just swipe to clean.
·The individually packed cards are non-abrasive and incredibly easy to use.

What are features of Cleaning Card?

Card Dimensions (L x W)	2 1/8 “ x 3 3/8”
Card Thickness	0.028” (+ 0.002 / – 0.001)
Card Construction	Polyester / PVC/ Cellulose
Saturation	99% Isopropyl AlcoholUV test card
Saturation Volume	3 ML (+/- 0.5 ML)
Inner Pack	25 Saturated cards/50 Saturated cards
MInner Pack Weight	0.68 lbs UV test card
Inner Pack Dimensions	H: 3 11/32” W: 5 ¼” D: 2 3/8”
Inner Pack Construction	Standard Clay Coated Chipboard Box
MOQ	200pcs
Standard Packing	25 pcs per box ,100 boxes per case, or 50 pcs per box, 50 boxes per case

What is Cleaning Card application?

1. All Card Readers

2. ATM/POS Terminals

3. Petroleum Pump

4. Time/Badge

5. Slot/Vending

6. Optical/Barcode

7. Smart Card

8. Thermal Printers

What are Alcohol Wipes For?

Posted on January 10, 2023January 11, 2023 by Adminsoft

Alcohol wipes are pre-saturated with a mix of alcohol as well as water. They’re used for a wide variety of purposes as well as have a number of advantages.

Alcohol wipes essentially

Alcohol wipes are as versatile as they work for people who intend to:

Guarantee a regular alcohol-to-water service proportion
Promptly and easily tidy surfaces
Promote germ-free environments
In most cases, alcohol wipes are generally utilized to:
Sterilize tough surface areas
Remove finger prints
Polish glass wares

What are alcohol wipes constructed out of?

Many

IPA Cleaning Wipes

alcohol wipes are made from a polyester tear-resistant and lint-free polyester “material.” The clean is after that taken in a solution of isopropyl alcohol as well as deionized water.

The higher the portion on the alcohol wipe container, the even more alcohol there is in the service. For example, 99.9% isopropyl alcohol wipes have a lot more alcohol than 70% wipes.

Nevertheless, 70% alcohol is much more effective at eliminating microorganisms than 90%. This is because the added water in the remedy helps reduce the chain reaction. When this process is reduced, alcohol can more thoroughly permeate virus.

What is isopropyl alcohol (IPA)?

Isopropyl alcohol is a chemical substance that liquifies soils like:

Oils

Finger prints

Change deposits

Carbon down payments
As well as much more
Isopropyl alcohol is likewise called IPA or CAS # 67-63-0 and it has a variety of objectives as well as benefits. Since isopropyl alcohol functions as a solvent, it’s extremely efficient at degreasing as well as sterilizing surface areas.

However, it is essential to keep in mind that alcohol is highly flammable. People who pick to use alcohol wipes must keep them safely far from less heavies, candles, as well as other open flames.

What are alcohol wipes for?

There is a wide array of alcohol-soaked wipe applications such as:

Cleansing optical fiber
Cleaning up hard surface areas
Cleansing blend splicers
Cleaning up computer system key-boards as well as mice
Cleaning up screen screens
And also much more
Cleaning up get in touch with surface areas
High-touch surfaces often accumulate microorganisms, dust, as well as bacteria. Nevertheless, alcohol wipes can help in reducing the quantity of bacteria that collects with time.

Door manages

Coffee makers

Visitor badges

Composing tools

Lift switches

Use alcohol wipes to coat such surfaces and also decrease the risk of condition spread. They are especially helpful when it concerns public places (e.g. food store) as well.

Cleaning up optical surface areas
Touches, water marks, as well as fingerprints affect the appearance of optical surface areas (like eyeglasses). Many people utilize alcohol wipes to counteract this with other transparent surfaces like:

Glassware

Windows

Chemistry lab devices
Natural resources in water can create streaks on glass. This is one reason that many alcohol wipes are made with distilled or deionized water.

Cleaning printers as well as computer system keyboards
Many high-touch office equipment create residue build-up with time. Alcohol wipes assist break down residue and also protect against accumulation in and also on:

Thermal printers

Computer key-boards

Computer mice

Motherboard

Phones

Tasks like printing delivery labels can also lead to deposit. Usage alcohol wipes usually to stop stubborn build-up from occurring.

Cleaning digital gadgets
Lint, deposit, as well as finger prints can influence the method digital gadgets look and operate. Maintain devices without residue by using alcohol wipes on:

Smartphones

Tablet computers

Computer system devices
Present displays

Smart watches

Constantly check tool guidebooks prior to cleansing electronic devices with alcohol wipes.

Deodorising family items
Since alcohol can eliminate odor-causing germs, they can deodorize usual household items like:

Footwear

Gym bags

Exercise devices

Alcohol wipes help get rid of solid odors to leave household items really feeling fresh. Wipe down shoes and workout devices regularly to stop smell build-up.

Cleansing precious jewelry
Fashion jewelry accumulates dust, bacteria, as well as deposit particularly with everyday usage. Alcohol wipes aid keep jewelry sanitary with routine cleansing.

Delicately swab precious jewelry with a soft alcohol clean to get rid of dirt as well as microorganisms from used fashion jewelry. This not just stops bacteria accumulation however it might lengthen the life of fashion jewelry.

Cleaning up oil, dust, and also various other contaminants
Alcohol wipes have lots of various other basic uses like:

Deodorant

Astringent

Liniment

Disinfectant

Due to the fact that alcohol is so flexible, it’s usually utilized to clean:
Make-up brushes

Dry eliminate boards
Footwear

Sponges

Mirrors

Tile

Stainless steel

Sinks

Blinds

Chrome

Can you make use of alcohol wipes on cuts or to clean up a wound?

Many individuals utilize alcohol

wipes to decontaminate insect attacks or care for punctured ears. Nonetheless, alcohol wipes can really damage prone tissue in case of injury. The National Health Service (NHS) advises the following to cleanse a minor injury.

Wash the cut, scrape, or wound in running water for five to 10 mins
Soak gauze or fabric in water or saline service
Gently dab the skin with the clean
Delicately pat dry with a clean towel or tissues
Use a clean and sterile clothing and also apply stress if essential
KEEP IN MIND: Look for medical interest in case of major injury or various other clinical emergency situations.

Can you be allergic to alcohol wipes?

Some people may have an allergic reaction when they are available in contact with scrubing alcohol or isopropyl alcohol wipes. Indications of an allergic reaction to alcohol include:

Hives

Trouble breathing

Swelling of the face, tongue, or throat
Symptoms might accompany scrubing alcohol or isopropyl alcohol. Always speak with a physician in case of an allergy. Although unusual, anaphylaxis is a serious and serious allergic reaction. Look for emergency situation treatment in case of:

Loss of awareness
Stopped breathing

Extreme swelling of the face, tongue, or throat
Alcohol wipes provide a hassle-free way to sanitize as well as brighten surface areas. Use them to remove fingerprints, deposit accumulation, and also microorganisms from high-touch locations. In many cases, alcohol wipes can additionally help in reducing the threat of disease spread in public rooms.

Card Printer Cleaning Card Manufacturer with OEM Service

Posted on January 10, 2023May 5, 2023 by Adminsoft

China trusted factory direct printer cleaning card production company

Shenzhen Yousite company is a company with more than 20 years of professional experience in developing, producing and selling dust-free clean room products.

Yousite company specializes in producing all kinds of cleaning swabs, cleaning cards , cleaning consumables and other industrial cleaning supplies.

Our company has its own independent laboratory and production base. At present, our main business is including card printer cleaning cards, cleaning wheels, cleaning kits, etc.

All our products are produced in 100-class clean rooms, and the production process is all carried out in accordance with relevant dust-free production specifications to ensure the maximum quality of products.

At present,as an OEM manufacturer for some large multinational companies, because our company’s products are reliable and guaranteed.

So our products are exported to developed countries and regions in Europe and America. If you need cleaning swabs, cleaning cards and cleaning kits, please contact us in time. I believe that our company will not let you down.

What kind of product is the CR80 cleaning card?

CR80 cleaning card is a relatively common cleaning consumable in the industry.

Used in various types of card printers and card inlets of POSE machines, clean hotel door systems and IC cards.

Cleaning of fuel dispensers, automatic ticket machines, etc., are very versatile. And this kind of cleaning card is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

1. The main material of CR80 cleaning card: it is wood pulp polyester mixed material, soaked in IPA solution.

2. The size of the CR80 cleaning card is: 54 x 86 x 0.96 mm, and the net weight of the bare package is 4.6g.

3. The packaging of the CR80 cleaning card is: single-piece aluminum foil bag, 50 pieces/box, 50 boxes/carton.

4. The size of the CR80 cleaning card outer packing box is: 345*270*470.

Advantages

Efficient: It can quickly remove dust, oil and water,

Safety: No corrosion to metal, rubber, plastic, nylon, resin and various electronic components.

Pure: Completely evaporates without residue, dries quickly.

Convenience: easy to carry, easy to use, easy to store.

Characteristics: Odor: Solution smell.

Uses: Widely used in cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health and various public places.

Instructions

How to use: Tear open the notch of the packaging bag, take out the cleaning card, insert it into the slot of the card reader, and then enter the automatic cleaning state.

Guidelines for use: 2-3 times/day in a high-density dust environment; 1-2 times/day in a medium-density dust environment; 1 time/day in a low-density dust environment.

Precautions: Do not approach fire and heat sources when using.

Generic Thermal Printer Cleaning Swabs

Posted on January 9, 2023May 13, 2024 by Adminsoft

Thermal printers are indispensable tools in various industries, facilitating efficient printing of labels, receipts, and barcodes.

However, to maintain optimal performance and prolong the lifespan of these printers, regular cleaning and maintenance are essential.

In this article, we delve into comprehensive guidelines for cleaning and maintaining thermal printers, focusing on critical components such as the barcode print head, drum, transmission system, and chassis.

Cleaning the Barcode Print Head:

Begin by turning off the printer and lifting the barcode print head.
Remove the ribbon and label paper to access the print head.
Gently wipe the barcode print head using a cleaning swab soaked in a suitable cleaning solution.
Ensure thorough cleaning by gently drying the print head with a clean swab.
To prevent damage from static electricity, remove any rings and consider using a grounding metal belt or anti-static mat during the cleaning process.

Cleaning the Drum and Rollers:

After cleaning the print head, focus on cleaning the drum and rollers.
Use a cleaning swab (cleaning wiper) soaked in 99.9% alcohol to scrub the rollers, rotating them by hand for thorough cleaning.
Dry the rollers completely after cleaning to prevent moisture-related issues.

Cleaning the Transmission System and Chassis:

The transmission system and chassis are prone to accumulating dust and adhesive residue from label paper.
Clean these components at least once a week using alcohol-soaked cleaning swabs.
Pay special attention to shafts, channels, and dust buildup within the chassis.
Ensure all cleaned parts are thoroughly dried to prevent any operational disruptions.

Maintenance Tips for Barcode Print Head:

Clean the barcode print head after each roll of ribbon or thermal paper use to maintain optimal performance.
Remove any jewelry to prevent scratching the print head surface during cleaning.
Utilize a cleaning swab soaked in 70% alcohol for gentle yet effective cleaning.
Avoid using abrasive tools or harsh chemicals that may damage the print head.

Regular cleaning and maintenance are vital for maximizing the performance and longevity of thermal printers.

By following the outlined guidelines for cleaning the barcode print head, drum, rollers, transmission system, and chassis, users can ensure consistent print quality and minimize the risk of mechanical issues.

Implementing these practices as part of a routine maintenance regimen will undoubtedly enhance the reliability and efficiency of thermal printing operations.