Description
A printhead cleaning film is a specially designed cleaning tool used to clean printheads in a variety of printing devices, including inkjet printers, label printers, barcode printers, and card printers. The film is made of a soft, non-abrasive material that is safe for use on delicate printhead components and is designed to remove ink, dirt, and other debris from the printhead surface.
Card readers require preventive maintenance to keep the heads clean and debris not build up from contamination. Presaturated cleaning cards are a cost-effective way to maintain readers and extend head life.
Printhead Cleaning Film is a specialized cleaning solution designed to remove excess ink, debris, and other contaminants from the printhead of a thermal transfer printer. The film is made of a thin, flexible material that is coated with a cleaning solution that is safe for use on printheads.
To use Printhead Cleaning Film, simply insert the film into the printer and run it through the printer as you would a normal label or card. The film will pass over the printhead, removing any excess ink or debris that may have accumulated on the printhead. The cleaning process takes only a few seconds and can be repeated as needed.
Zebra Thermal Printer Printhead Grinding Sheet 4” x 6”
Printhead Cleaning Film Lapping Film Sheet
Product Features
Use printhead cleaning film to keep your thermal transfer printhead free of dust and dirt. Printhead cleaning film provides an easy.
Thermal Printhead Grinding Pads are specially designed to repair minor scratches on thermal printheads. Grinding sheets can be made into 4”x6” size sheets, which can be customized according to customer requirements. The abrasive film is coated with aluminum oxide, which removes burnt-on contamination and refurbishes the printhead. Each grinding sheet can be used up to 6 times.
Print Head cleaning film
Applications
Thermal Printhead Grinding Pads can be used with all thermal printer printheads.
To use a printhead cleaning film, follow these steps:
- Turn off the printer and unplug it from the power source.
- Remove the printhead from the printer according to the manufacturer’s instructions.
- Open the cleaning film package and remove the film from the package.
- Gently slide the cleaning film over the printhead surface, using a back-and-forth motion to ensure complete coverage of the printhead.
- If necessary, repeat the process with a new section of the cleaning film until the entire printhead surface has been cleaned.
- Reinsert the printhead into the printer according to the manufacturer’s instructions.
- Turn on the printer and print a test page to ensure that the printhead is functioning properly.
It is important to note that printhead cleaning films should be used with caution, as using them improperly or too frequently can damage the printhead. Before using a cleaning film, be sure to check the manufacturer’s recommendations for cleaning and maintenance.
By following these best practices and regularly using a printhead cleaning film, you can help ensure that your printer continues to function properly and remains in good working condition. If you do experience issues despite regular cleaning and maintenance, be sure to consult the manufacturer’s troubleshooting guide or contact their customer support for further assistance.
Use printhead cleaning film to keep your thermal transfer printhead free of dust and dirt.
Thermal transfer printing machine, special cleaning and maintenance kit for barcode machine is newly launched.
Due to the thermal transfer printer, the print head of the barcode printer is a disposable and vulnerable ceramic piece. Due to irregular use and maintenance, the print head will be worn and blocked in a large area. as the picture shows
This is the main reason why the daily use of barcode machines and thermal transfer printers causes broken needles and reduced service life of the print head. Our company has developed special cleaning kits in combination with various brands of barcode printers (TSC, Zebra, Boss, Demas, Markon, Videojet, SATO, Toshiba, etc.). The service life of the print head is greatly improved, and the irregular maintenance of the printer operator is regulated. Reduce the cost of consumables for the majority of enterprise customers.
Cleaning kit contains
1. The cleaning pen can be wiped directly to remove the residue of the print head after the printer is finished and the power is turned off.
2. Print head grinding sheet When there is carbon ribbon chemical residue on the surface of the print head, you can use the abrasive sheet to remove it and repair the print head with false broken needles without damaging the print head
3. Cleaning card The cleaning card is mainly used to clean the residue of the print head rubber roller.
Card Reader Cleaning CR80
Specification
Abrasive sheets can be made into sheets of various sizes: 3″x6″, 4″x6″, 4″x8″, or customized according to customer requirements. The abrasive film is coated with aluminum oxide, which removes burnt-on contamination and refurbishes the printhead. Each grinding sheet can be used up to 6 times.
Why Choose Us?
Shenzhen Yousite company. is an excellent manufacturer of cleaning products, mainly providing customers with clean room swabs, cleaning wipes, and cleaning cards.
We manufacture and develop cleaning products that restore and protect technical equipment and equipment, such as point-of-sale systems, payment capture terminals, check scanners, receipt and label printers, and cleaning supplies for card printing equipment.
1. OEM – Original Equipment Manufacturer
– We can design the label on the packaging and cartons as required for your brand.
– The size can be customized.
Using Printhead Cleaning Film on a regular basis can help prevent printhead damage, streaks, and other printing issues that can occur when excess ink or debris builds up on the printhead. It’s recommended that you use a cleaning film after every 500 prints or at least once a month to ensure that your printer is functioning at its best.
If you have any more questions, please do not hesitate to contact us.
Email(beck): beck@yaostbio.com
Welcome to your inquiry!!
Resources
YOUSITE TDS Thermal printhead Cleaning Film Lapping Film
In addition to using a printhead cleaning film, there are a few other steps you can take to maintain your printer and ensure optimal performance:
- Keep the printer clean: Regularly cleaning the printer can help prevent dust, debris, and other contaminants from getting inside and causing damage. Be sure to follow the manufacturer’s recommendations for cleaning and maintenance.
- Use high-quality ink or toner: Using high-quality ink or toner can help prevent clogs and other issues with the printhead. Be sure to use ink or toner that is recommended by the printer manufacturer.
- Print regularly: Printing regularly can help keep the printhead from drying out and prevent clogs. Be sure to print at least a few pages each week, even if you don’t have anything specific to print.
- Replace cartridges or ribbons when necessary: When ink or toner runs low, be sure to replace the cartridge or ribbon promptly to avoid damage to the printhead.
Reviews
There are no reviews yet.