Evolis Complete Cleaning Kit

Evolis Primacy Card Printer Regular Cleaning

Evolis Primacy Card Printer Periodic cleaning method through machine panel operation.

The Primacy machine is operated through the machine panel for regular cleaning. Please follow the steps below for regular cleaning:

Repeated runs through the printer with the cleaning card clean the cleaning roller, maintaining print quality and extending the life of the printhead.

How to Clean the Evolis Primacy Printer. Insert the cleaning card in the opened feeder, adhesive face upwards. This starts the cleaning. Adhesive card.

1. Open the printer cover.

2. Take out the ribbon.

3. Close the cover and make sure to hear a click.

4. Open the card feeder on the printer.

5. Use the ruler to adjust the card thickness to the maximum position.

6. Take out all the cards in the card feeder.

7. Double-click the cleaning button on the control panel, and then insert the cleaning card .

8. Peel off the film on the cleaning card, insert the cleaning card into the card feeder according to the picture, with the sticky side facing up.

9. The used cleaning card will automatically pop into the output tray. Regular cleaning is done.

Card Printer Cleaning Roller

Card Printer Cleaning Roller

Card Printer Cleaning Roller

The card printer cleaning wheel is a product specially designed to clean the card when producing the card. Put the cleaning wheel into your printer, the cleaning wheel will absorb the dust particles on the card during printing, which will prolong the life of your print head and improve the quality of your card punching.

It is highly recommended to perform a printer cleaning every time the ribbon is replaced. In addition to using the cleaning card to clean the card channel, each cleaning also includes replacing the card cleaning roller.

Watch out for a lot of dust particles on your cleaning wheel, or clean it after every 250 cards printed.  

Note your printer model, it may have one or two cleaning rollers.

Instructions:  

1. Open the top cover of the machine.  

2. Remove the ribbon and printer cleaning roller from the printer.  

3. Locate and remove the cleaning roller between the two ribbon drive rollers.  

4. Peel off a layer of thin paper on the cleaning card, attach the cleaning card to the cleaning wheel and drag the cleaning card overturned to make it absorb the dirt and dust on the cleaning wheel to the cleaning card.

HiTi CS-220E Card Printer Ribbon not Detected

HiTi CS-220E Card Printer Ribbon not Detected

HiTi developed the CS-220E card printer and reported that the ribbon was not detected when it was powered on

HiTi card printer CS-220E reports 0201 No ribbon detected when the machine is turned on.

If this error occurs, the machine failure can be eliminated from the following points.

1. Check whether the ribbon is installed in the machine, if not, please install the ribbon correctly.

2. Whether the ribbon in the machine is installed correctly, if the ribbon is installed incorrectly, please install the ribbon correctly.

3. The ribbon in the machine is broken, connect the broken part, stick it with tape, and reinstall the ribbon correctly.

4. You can calibrate the sensor for the machine in the printing preferences.

If the machine still reports an error after eliminating the above points, please contact our technical department in time!

Yousite company offers many OEM cleaning card solutions to suit your needs, including private label cleaning card.We are producing card printer cleaning kits and supplying all major brands Manufacturer of a full range of cleaning supplies. We can customize and produce standard size IPA according to customer’s requirements Soak cleaning card, sticky rollers, sticky card, IPA cleaning pen and IPA cleaning cloth

Printer Clean Swabs

Printer Clean Swabs/Cleaning Stick for Card Printer/Thermal Printer

Printer clean swabs/cleaning stick for card printer/thermal printer

Specifications

1. cleaning help for large format printers.
2. cleaning swab stick/Cleaning wipes/non-woven cloth.
3. best price and fast delivery.

IPA isopropyl alcohol: As a chemical solvent in many industries, especially during electronics assembly and repair services.

The most typically made use of chemical solvent is isopropanol (IPA Swab).

It is very easy to liquify various polar and non-polar contaminants. Generally utilized to liquify and also remove light oil, finger prints, cutting liquid, flux deposits, carbon down payments and release representatives. It is also easily miscible with water, so it can additionally be used as a desiccant.

For applications on electronic printed circuit card (PCB) components, we use isopropyl alcohol to clean flux residues from PCB repair work and remodeling. Remove solder paste or sticky substances from SMT mesh. Our Maintenance with Isopropyl Alcohol cleans SMT reflow ovens, wave soldering jaws. Precision soldering tips, trays and any other flux buildup and carbonization that tends to collect during automated soldering.

Compatibility of isopropanol

Isopropyl alcohol swab is generally suitable with the majority of products utilized in digital products.

Printer Clean Swabs/Cleaning Stick for Card Printer/Thermal Printer

Printer Clean Swabs/Cleaning Stick for Card Printer/Thermal Printer

When solvents are incompatible with the substrate, they may cause cracking (microcracks), soften the material, or in the case of seals or gaskets, cause them to expand, shrink, or become brittle.

Quality or kind of isopropanol

There are several varieties and also grades of isopropanol, which are generally differentiated according to the amount of water in the remedy and other chemicals or non-volatile materials measured.

Isopropyl alcohol is hydrophilic or miscible with water, so it is simple to get water right into an azeotropic solution. When you see “70% isopropanol” on the tag, it describes the content of isopropanol related to dissolved water – that is, 70% isopropanol plus 30% water.

Water eliminated to create an extra pure isopropanol to develop the so-called “anhydrous” isopropanol.

IPA including 0.2% or 50% water has little impact on the look and smell of the material, however will considerably affect the surface area stress, or its moistening capability and also drying time. The more water containing isopropanol, the higher the surface area tension. This creates the solvent to come to be a lot more dry rather than wet or flaky, which might trigger areas. Cleaning up mirrors, lenses and also other optical tools “water areas” is specifically troublesome.

With the increase of the portion of water in the alcohol service, the drying time rises significantly. Depending upon the application, this can be a benefit or a drawback. For instance, isopropyl alcohol is frequently used as a flux eliminator to remove change residues around solder joints. Operators often tend to select fast drying, to ensure that they can clean up electronic equipment in time as well as recover it to use asap. In order to decay and eliminate thick, sticky or baked products that require even more time to remain or saturate, slowing down the drying out time normally improves the cleansing impact.
ACS/Reagent Grade – Satisfies or surpasses the pureness criteria established by the American Chemical Society (ACS). This quality applies to food, medication or pharmaceutical use and various other applications needing rigorous quality specifications as well as purity exceeding 95%.

USP Quality – Meets or surpasses the needs of the United States Pharmacopoeia (USP).

NF Quality – Satisfies or goes beyond the demands of the National Formulary (NF).

Lab Grade– The grade most commonly utilized for clinical applications, yet the exact impurity web content is unknown.

Purification quality – likewise referred to as “pure” or “useful quality”, which does not meet official requirements as well as is not enough for food, medication or clinical objectives.

The basic term “alcohol for external usage” typically describes isopropyl alcohol, but individuals who wish to acquire a specific quality of alcohol ought to prevent making use of items marked in this way. Outside alcohol does not refer to a certain grade, or perhaps various types of alcohol, such as ethanol

Customer alcohol for external usage may also have various other components, such as additives, seasonings and colorants, which are potential contaminants.

Cleaning up stick/dust-free cloth/non-woven towel for printer equipments.

10PCS Head Cleaner Cleaning Card for Magnetic Stripe Reader

10PCS Head Cleaner Cleaning Card for Magnetic Stripe Reader

Functions and Benefits: This double-sided pre-saturated cleaning card is created to securely and efficiently get rid of all dust, dust, ink, magentic oxide and other pollutants that build on magnetic heads of various sorts of visitors.

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.

The cleansing cards are created of 45% wood pulp and also 55% polyester, the wood pulp has outstanding absorbency and can slow down the dissipation of IPA.

It is soaked with a 99.9% IPA remedy that properly gets rid of ink, debris, and deposit build-up on card printer transfer rollers.

The plastic handle of the IPA-soaked swab is full of 99.9% IPA remedy, and it can be used according to the cleansing procedure guide.

Instructions:

1. Tear open the bag and obtain the cleansing card.

2. Swipe the cleaning card via the card reader several times, after that turn it around and also repeat again.

3. Eliminate the card.

4. Repeat the above actions if needed.

Advised Usage:

1. As soon as per day for outside or high-usage card viewers.
2. As soon as each week for inner or low-usage card viewers. Warning: Flammable. Shut out of reach of children. Avoid eyes.

Dimension:3.34″ X2.12″ (85.8 mm X 54mm).

Active Component: Isopropyl alcohol.

Advised for:

All Card Visitors Swipe Atm Machines POS Terminals Access Control Units Hotel Door Locks Pay at the Pump PVC Card Printers Several Other Applications.

The Special Cleaning Card For Printer

Cleaning Card For All Types Of POS, Debit, ATM and Interact Systems

Clean cards for all types of POS, debit, ATM, and interactive systems

Maintaining the cleanliness of card readers in POS systems, ATMs, debit terminals, and interactive kiosks is essential for optimal performance and longevity. Regular use of specialized cleaning cards helps prevent misreads, reduce downtime, and extend equipment life.

Recommended Cleaning Cards:

Here are some effective cleaning cards suitable for various devices:

Yousite Card Reader Cleaning Cards are designed to remove contamination from a wide variety of card readers including smart card readers, POS credit and debit card readers, ATM readers and more.

This safe and effective product, inserted like any credit card, will clean the entire surface of the read pin and magnetic head.

These double-sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides, and other contaminants

Introducing Yousite Card Reader Cleaning Cards.

How to Clean Card Reader

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm sensitive electronics and moving parts within the printer.

This revised design has increased thickness to improve stability and create firmer, even pressure through the reader.

The cards feature a streamlined design with a more consistent thickness, adding to the card's versatility.

This consistency makes it suitable for m reader styles and far exceeds the effectiveness of any other card on the market.

Cleaning Frequency:

Regular maintenance is key. It's advisable to clean card readers weekly or after every 500 transactions, depending on usage volume and environmental factors. Routine cleaning helps maintain device efficiency and prolongs its operational life.

Incorporating these cleaning cards into your maintenance routine will enhance the reliability and lifespan of your card-reading equipment.

Evolis ACL004 T Cleaning Cards

T Cleaning Cards for Evolis Printers

T Cleaning Cards for Evolis Printers

Compatible Evolis Primacy card printer cleaning card

Product type: T-shaped long cleaning card, short sticky card, long sticky card

Model code: T-shaped long cleaning card (ACL004), adhesive cleaning card (ACL003), long adhesive cleaning (A5070)

Description: T-shaped long cleaning card (54x326mm), adhesive cleaning cards 54 x 90mm, long adhesive cleaning (54x170mm)

Scope of application: cleaning the card passage of the printer

EVOLIS includes T-Cards for deep cleaning the card transport rollers on Evolis Zenius and Primacy printers.

Keeping your Evolis printer clean saves you money by extending the life of your print head and other moving parts.

Fortunately, proper maintenance of your Evolis printer takes very little time.

Evolis Cleaning Kit contains T-Cards and works with Evolis Zenius and Primacy card printers during deep cleaning cycles.

Product functions and features

1. Can effectively clean and maintain equipment
2. Removing dirt can reduce the read failure of the device
3. Simple operation, economical and effective

Yousite is a direct manufacturer of card printer cleaning kits, and the products can completely replace the original products. Not only the product price is low and the quality is high, but it can also reduce the transportation cost. Everything is based on the interests of customers. As long as there is a need, we will try our best to satisfy you. Yousite only makes high-quality products!

Evolis A5002 or CR80

Transport Rollers Cleaning Card

Maintaining the cleanliness of your card printer's transport rollers is essential for ensuring smooth card feeding and high-quality prints. Transport roller cleaning cards are specifically designed tools pre-saturated with cleaning solutions to effectively remove dust, debris, and other contaminants from these critical components.

What Are Transport Roller Cleaning Cards?

Transport roller cleaning cards are specialized maintenance tools pre-saturated with cleaning solutions, typically containing high-purity Isopropyl Alcohol (IPA). These cards are engineered to remove contaminants such as dirt, ink residue, adhesives, and other debris that accumulate on the transport rollers of card printers. Regular use of these cleaning cards helps maintain optimal print quality and prolongs the lifespan of the printer components.

Transport Rollers Cleaning Card

For use with all Evolis card printers · For the cleaning of card transport rollers · Pre-saturated cleaning cards packaged in an individual tear-open pouch.
The subway is a city's emerging traffic tool, carrying millions of flows daily. Subway cards as carrier material to take the subway, which greatly improves the convenience of people's travel. However, due to the metro card carrying a lot of dust, the credit card for a long time will cause the card slot card the accumulation of large amounts of dust, affecting the efficiency of a passenger car.

Evolis A5002 or CR80

Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.

These double-sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides, and other contaminants that build up on magnetic and optic reader heads. They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.

Facing this problem, how to solve it?

Yousite’s cleaning card can easily dispose of this puzzle. We are specializing in the production of cleaning cards, cleaning swabs, and cleaning kit manufacturers, for the subway card slot that is easy to dirty, and we are also through continuous testing, making our cleaning cards more easily, and more suitable for all subway stations. When the cleaning card slot is, you can first use our cleaning card clean, and then use a clean foam swab to erase the dust around the corner. If some induction card readers, don't put try our cleaning cloth, the effect is very good.
In addition, ticket machines, and vending machines in the subway is also can clean our products, if there are good cooperation intentions, may wish to discuss cooperation with Yousite. technology!

Recommended Cleaning Frequency:

It's advisable to clean your card printer's transport rollers at regular intervals, such as every time you change the ribbon or after a specific number of prints as recommended by the printer manufacturer. Regular maintenance helps in sustaining print quality and extending the printer's operational life.

Usage Instructions:

  1. Power Down the Printer: Ensure the printer is turned off and unplugged to prevent any electrical issues.

  2. Prepare the Cleaning Card: Remove the cleaning card from its packaging.

  3. Insert the Cleaning Card: Place the card into the card feed path as you would with a regular card.

  4. Initiate Cleaning Cycle: If your printer has a cleaning function, activate it. Otherwise, manually feed the card through the printer to allow it to clean the transport rollers.

  5. Repeat if Necessary: For heavily contaminated rollers, multiple passes may be required.

  6. Dispose of the Used Card: After use, discard the cleaning card appropriately.

  7. Power Up and Test: Plug in and turn on the printer, then run a test print to ensure optimal performance.

Product Options:

Here are some transport roller cleaning cards available in the market:

The Special Cleaning Card For Printer

Thermal Printer Cleaning Cards

Maintaining your thermal printer's performance and print quality requires regular cleaning, and thermal printer cleaning cards are an effective solution for this purpose.

What Are Thermal Printer Cleaning Cards?

Thermal printer cleaning cards are specially designed tools pre-saturated with cleaning solutions, typically containing high-purity Isopropyl Alcohol (IPA). These cards are engineered to remove contaminants such as dirt, ink residue, adhesives, and other debris that accumulate on the print heads, paper guides, and paper paths of thermal printers. Regular use of these cleaning cards helps in maintaining optimal print quality and prolongs the lifespan of the printer components.

Thermal Printer Cleaning Cards

Clean your Thermal Printer with every media roll change or at least twice per month. Printers become dirty from "paper dust" and adhesives as well as environmental contaminants such as airborne grease particles.

This cleaning card removes burnt-on paper particles and adhesive residue that build up on a printer’s thermal print head.

The minimum temperature of the print head is 158 degrees Fahrenheit. Which will burn foreign material to the print head causing streaks and fading of the printed label or receipt.

The cleaning card is the most versatile method of cleaning a print head as it does not require the print head to be easily accessible or exposed.

Thermal Printer Cleaning Cards IPA

In most cases, with the power off, you insert it as you would the print media and just pull the card through.

The most commonly used size of thermal printer print head. It is suitable for most thermal printers, including barcode printers, label printers, receipt printers. The card is soaked in the IPA solution to make it effectively remove the residual oxide on the print head. It has a flat surface and thin thickness, reducing material costs while also meeting cleaning requirements. Because the print head and platen rollers are also flat. Good absorbency and long-lasting cleaning.

It is recommended by thermal printer manufacturers to clean the print head with every change of paper or label stock for crisply printed material.
For the most thorough cleaning use the Yousite Thermal Printer Cleaning Cards.

These unique cleaning cards will not only clean the print head but rotate the platen rollers as they clean to remove contaminates that normally would just migrate back to the print head.

The combination of scrubbing waffles and the ability to rotate the platen rollers makes this product by far the choice of OEMs.

Product Options:

Here are some thermal printer cleaning cards available in the market:

Usage Instructions:

  1. Power Down the Printer: Ensure the printer is turned off and unplugged to prevent any electrical issues.

  2. Prepare the Cleaning Card: Remove the cleaning card from its packaging.

  3. Insert the Cleaning Card: Place the card into the paper feed path as you would with regular media.

  4. Initiate Cleaning Cycle: If your printer has a cleaning function, activate it. Otherwise, manually feed the card through the printer to allow it to clean the print head and paper path.

  5. Repeat if Necessary: For heavily contaminated printers, multiple passes may be required.

  6. Dispose of the Used Card: After use, discard the cleaning card appropriately.

  7. Power Up and Test: Plug in and turn on the printer, then run a test print to ensure optimal performance.

Recommended Cleaning Frequency:

It's advisable to clean your thermal printer at regular intervals, such as every time you change the media (labels, paper rolls, etc.), or after a specific number of prints as recommended by the printer manufacturer. Regular maintenance helps in sustaining print quality and extending the printer's operational life.

Incorporating thermal printer cleaning cards into your routine maintenance schedule is a cost-effective way to ensure consistent performance and longevity of your printing equipment.

Zebra 105912-913 Premier Cleaning Kit

Zebra T-shape Long Cleaning Card

The Zebra T-Shape Long Cleaning Card is a specialized maintenance tool designed to clean Zebra card printers effectively. Its unique T-shape allows it to reach and clean areas within the printer that are otherwise difficult to access, ensuring optimal performance and print quality.

Long TShape Cleaning Kits for P120i Card Printer 105912-312, 50/Bag(50pcs Cleaning Cards, Length 320mm): Cleaning Kits .

Zebra T-shape long Cleaning Card

1. Blending polyester, spun lace, cellulose, and PVC card.
2. For cleaning contaminants from Zebra printers.
3. Hot-press compound.

Description

Zebra 105912-913 Premier Cleaning Kit

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

The saturated disposable cleaning card is designed for cleaning effectively dirt, magnetic oxides, oils, debris, lotions, and other contaminants from all kinds of ID card printers, scanners, readers, and barcodes. It is a cost-effective way to maintain your card readers and increase the service life of the magnetic heads We can produce different cleaning cards for different printer numbers according to your requirements.

Features

  • Material Composition: Typically made from a blend of spunlace, polyester, cellulose, and PVC materials, providing excellent absorbency and durability.

  • Pre-saturated with IPA Solution:  Infused with an electronic-grade Isopropyl Alcohol (IPA) solution, which effectively removes dirt, magnetic oxides, oils, debris, and other contaminants from the printer components.

  • Packaging: Each cleaning card is individually sealed in an aluminum foil pouch, ensuring longevity and preventing contamination before use.

Usage Instructions:

  1. Power Down the Printer: Before cleaning, turn off the printer and unplug it from the power source to ensure safety.

  2. Access the Card Path: Open the printer’s card feeder or input hopper to access the card path.

  3. Insert the Cleaning Card: Place the T-shape long cleaning card into the card feeder just as you would with a standard card.

  4. Initiate the Cleaning Cycle: Refer to your specific Zebra printer model’s manual to start the cleaning cycle. Some models have a dedicated cleaning button or option within the printer’s software interface.

  5. Run the Cleaning Card Through the Printer: Allow the cleaning card to pass through the printer. The pre-saturated card will absorb and remove contaminants from the rollers and internal components.

  6. Repeat if Necessary: For printers with significant buildup, it may be beneficial to run a second cleaning card to ensure all contaminants are removed.

  7. Dispose of the Used Cleaning Card: After use, discard the cleaning card appropriately. Single-use

  8. Power Up and Test: Plug the printer back in, power it on, and run a test print to ensure optimal performance.

Recommended Cleaning Frequency:

  • Regular Maintenance: For environments with heavy printer usage, it’s advisable to clean the printer every 1,000 card prints or once a month, whichever comes first.

  • Signs of Contamination: If you notice print anomalies such as streaks, missing colors, or other print defects, perform a cleaning cycle immediately.

Purchasing Options:

Zebra T-Shape Long Cleaning Cards are available through various suppliers. Here are a few options:

  • YOUSUTO: Offers T-shape long cleaning cards compatible with Zebra printers.

  • Amazon: Various sellers offer presaturated long T-shape cleaning kits suitable for Zebra card printers.

Regular use of these cleaning cards helps maintain the longevity and performance of your Zebra card printer, ensuring consistently high-quality prints.