Home » Card Reader Cleaning Card » Page 3

How to Clean a Credit Card Reader & Thermal Printer?

Posted on January 16, 2023May 5, 2023 by Adminsoft

In card printer systems, the card printer is the key terminal device. Through the background program setting, the card printer can print personal information such as portrait photos, names, and units on the card surface, which can be used as identity confirmation and realize various smart application functions. The daily cleaning of the card printer is the key to ensure its service life, which should be our great attention.

Use of cleaning kits

To keep your card printer working best, perform a maintenance cleaning after every roll of ribbon or 250 pages printed. The kits in the cleaning kit can help you complete standard cleaning routines more efficiently and thoroughly. Please clean the printer properly according to the following methods. The whole cleaning process only takes a few minutes.

Cleaning pens soaked in 99.99% acetone alcohol .
The cleaning card is used to clean the inside of the machine and the cleaning rollers.
Cleaning wipes soaked in 99.99% isopropyl alcohol are used to clean the conveyor rollers inside the machine.

How to clean the print head?

Printhead cleaning pen contains Isopropanol alcohol proven to effectively clean the printhead from dirt, ink, and other contaminants that have built up over time.

Have you noticed an unprinted line on your print card, if so, it’s time to clean your print head.

We should clean the print head after every 250 prints of the printer to ensure the print quality.

1: Open the top cover of the printer.
2: Use the print head cleaning pen to gently wipe the glass body of the print head several times, wipe left and right. To remove dust accumulated on the print head.
3: When the print head is completely dry, the job of cleaning the print head is finished.

How to clean the pressure roller?

Preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

The printer prerol should be cleaned after printing each roll or 250 cards, if the surface of the printer pressure wheel looks dirty, the surface of the printer pressure wheel should be cleaned in time. Follow the steps below to clean the printer pressure rollers.

Open the card, remove the card, and find the card’s two drive rollers.
Remove the ribbon (and transfer film).
Find the pressure rollers.
Use the cleaning wipes from the cleaning bag to clean the two drive rollers in the printer card magazine.
When cleaning, press ON/CANCEL (on/off) or pause/resume (online) to rotate the pressure wheel and wipe with a clean gauze.
Wait for the pressure wheel to dry and load the ribbon.
After cleaning all drive rollers, close all chassis covers.

Maintaining the Cleanliness of the Cleaning rollers?

Compatible Cleaning Kit Contains Adhesive cards – 85x150mm, 10 Cleaning Swabs, 10 Cleaning wipes. Magicard Prima Cleaning Kit.

Put the cleaning rollers into the printer, the cleaning wheel will absorb the dust particles on the card during printing, thus prolonging the life of the print head and improving the quality of the punched card.
Pay attention to whether there are a lot of dust particles on the cleaning wheel, or wash it after every 250 cards are printed.
Note your printer model. It may have one or two cleaning rollers.

1: Open the top cover of the machine.
2: Remove the ribbon and printer cleaning roller from the printer.
3: Locate and remove the cleaning wheel between the two belt drive rollers.
4: Tear off a thin layer of paper from the cleaning card, and stick the cleaning card on the drag cleaning card with the cleaning wheel turned over, so that the dirt and dust on the cleaning wheel are adsorbed on the cleaning card.

What are the benefits of regular printer maintenance?

1. Best performance

A clean printer leads to optimal efficiency and performance. As a by-product of normal printing, printers often accumulate residue (consumable dust, adhesives, etc.). Regular cleaning of your Credit Card Reader or ID printer can help prevent poor quality issues and can increase productivity by limiting the number of interruptions to your workflow. Likewise, the printer itself will perform optimally when the thermal/thermal transfer printhead has a clean and clear label output path.

2. Save maintenance cost

When your printers are clean, they are less likely to malfunction. Ensuring that the printheads and hardware inside the printer are clean saves critical time and money from being wasted without costly replacements and time-consuming integration into a new printer.

3. Extend the life of the printer

Credit Card Reader printers are built to last. Regular cleaning routines help extend the life of mission-critical equipment by ensuring that hardware and its vital accessories are free of debris and particles that can accelerate wear.

4. Print clear and readable labels

When a barcode verification detector or handheld scanner is running, dust under the printhead can cause barcodes to fail or scan incorrectly. Cleaning the printer hardware will help prevent labels from being voided and incorrectly reprinted. A clean printer also prevents barcodes from not scanning properly due to dust under the printhead. Reducing the chances of these bad barcodes being shipped out can help prevent large fines later imposed by consignees for deliveries.

5. Reduced need for maintenance

Minimize business disruption by cleaning your printers on a regular basis. When printers are clean and running at maximum capacity, mission-critical equipment is working hard to maximize revenue. When a printer fails, every minute of failure affects your bottom line. In the event of a printer failure, your main concern is minimizing downtime.

Regular cleaning of your printer will not only help your printer last longer, it will also ensure that your labels are always legible.

How To Clean Your Printer Rollers?

Posted on January 12, 2023January 12, 2023 by Adminsoft

There are more and more types of thermal printers now, and many customers only know how to use thermal printers, but they don’t know how to maintain thermal printers. For this reason, the person in charge of the website of Yousite company proposed that building a special website for thermal printers would be more helpful to serve our customers.

What is the basis for this thermal printer website to be conceived? We will classify the main brand products. For example, we are selling a set of cleaning products for well-known printers such as Zebra, Alice, and Megaca. Let visitors find the products they want at a glance. In addition, we will sort out some other cases. For example, where else can our cleaning card be applied.

In order to help customers solve problems quickly, we will also collect questions raised by customers and answer them.
We are a professional manufacturer of thermal printer cleaning kits, so we have the responsibility to serve each of our customers well!

How To Clean Your Printer Rollers?

1. Required cleaning kits

1. Cleaning card 2. IPA Cleaning swab 3. Cleaning rollers.

2. Use of cleaning kits

1. First open the printer and take out the ribbon.

2. Tear off the packing bag and put the cleaning card into the card input box of the printer. 3. Open the properties of the card printer driver; Device Settings.

4. Select the Tools tab and click the Printer Cleaning button to clean.

6. Take out the cleaning cotton swab, squeeze the cotton swab stick, and let the liquid flow out to the head of the cotton swab.

7. Use a cleaning swab to gently wipe the print head of the printer (wipe in one direction).

8. Wait for the liquid to dry and the body cleaning is complete.

Notice? The cleaning process requires two cleaning cards. A cleaning card is the same size as a general plastic card, we call it a “cleaning card”. The other card is larger and wider at one end, we call it the “Long Cleaning Card“.

How do you remove ink from printer rollers?

1. Leave the printer powered on, or turn it on if it is not on.

2. The cleaning process can be started in one of the following ways:

Press and hold the printer’s panel button for a few seconds until the message REMOVE RIBBONTHEN CLOSE HEAD appears on the LCD.

Go to the P330i Printer Tools software from your computer and click the CLEAN button. The LCD will display the REMOVE RIBBON THEN CLOSE HEAD message.

3. Open the main cover, release the print head holder, and then remove the ribbon. Close the printhead holder. The LCD panel will display EMPTY FEEDER&PRESS BUTTON (clear Empty feeder and button pressed) message.

4. Open the card feeder cover, and then remove the card from the card feeder. The last card is difficult to remove and can be left in the feeder. Press the panel button on the front of the printer. Cards left in the feeder will be ejected. The LCD panel will display the message LOAD CLEANING CARD IN FEEDER.

5. Place the cleaning card pre-soaked in detergent into the card feeder. The cleaning card will be automatically fed into the printer and the cleaning process will start

(After the cleaning card is fed in, there is a delay of a few seconds before the cleaning move operation begins). During the cleaning process, the LCD will display the message CLEANING PRINTER.

6. When this part of the cleaning process is complete, the cleaning card will eject and the LCD will display the message PRESS EUTTONTO CONTINUE.

7. After the user presses the panel button, the LCD will display the message FEED LONG CLEANING CARD IN EXIT. Insert the longer end of the long cleaning card into the card exit (located directly above the output hopper). When the user inserts a “regular” cleaning card into the card outlet, the LCD will display INVALID

CARD, PRESS BUTTON (card incorrect, button pressed) message until the user presses the panel button and inserts a long card into the card outlet.

8. The long cleaning card will be automatically fed into the printer and the printing process will begin. The LCD will display the CLEAN PRINTER message again.

9. When the cleaning process is complete, the long cleaning card will pop out and the LCD will display a READY message, indicating that the printer is ready to resume normal printing operations.

Notice? If the user does nothing at this point (for example, no long cleaning card inserted), the LCD will change to display CLEAN PRINTER after the timeout. The printer can print, but the LCD will continue to display CLEAN PRINTER. This limited cleaning process does not perform a thorough cleaning, but it can be done without the “Long Cleaning Card”.

To return the display to READY requires the user to perform the complete cleaning process from step 2 above through step 9 below using both the long and short cleaning cards.

Card Printer Cleaning Card Manufacturer with OEM Service

Posted on January 10, 2023May 5, 2023 by Adminsoft

China trusted factory direct printer cleaning card production company

Shenzhen Yousite company is a company with more than 20 years of professional experience in developing, producing and selling dust-free clean room products.

Yousite company specializes in producing all kinds of cleaning swabs, cleaning cards , cleaning consumables and other industrial cleaning supplies.

Our company has its own independent laboratory and production base. At present, our main business is including card printer cleaning cards, cleaning wheels, cleaning kits, etc.

All our products are produced in 100-class clean rooms, and the production process is all carried out in accordance with relevant dust-free production specifications to ensure the maximum quality of products.

At present,as an OEM manufacturer for some large multinational companies, because our company’s products are reliable and guaranteed.

So our products are exported to developed countries and regions in Europe and America. If you need cleaning swabs, cleaning cards and cleaning kits, please contact us in time. I believe that our company will not let you down.

What kind of product is the CR80 cleaning card?

CR80 cleaning card is a relatively common cleaning consumable in the industry.

Used in various types of card printers and card inlets of POSE machines, clean hotel door systems and IC cards.

Cleaning of fuel dispensers, automatic ticket machines, etc., are very versatile. And this kind of cleaning card is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

1. The main material of CR80 cleaning card: it is wood pulp polyester mixed material, soaked in IPA solution.

2. The size of the CR80 cleaning card is: 54 x 86 x 0.96 mm, and the net weight of the bare package is 4.6g.

3. The packaging of the CR80 cleaning card is: single-piece aluminum foil bag, 50 pieces/box, 50 boxes/carton.

4. The size of the CR80 cleaning card outer packing box is: 345*270*470.

Advantages

Efficient: It can quickly remove dust, oil and water,

Safety: No corrosion to metal, rubber, plastic, nylon, resin and various electronic components.

Pure: Completely evaporates without residue, dries quickly.

Convenience: easy to carry, easy to use, easy to store.

Characteristics: Odor: Solution smell.

Uses: Widely used in cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health and various public places.

Instructions

How to use: Tear open the notch of the packaging bag, take out the cleaning card, insert it into the slot of the card reader, and then enter the automatic cleaning state.

Guidelines for use: 2-3 times/day in a high-density dust environment; 1-2 times/day in a medium-density dust environment; 1 time/day in a low-density dust environment.

Precautions: Do not approach fire and heat sources when using.

Cleaning Cards Manufacturers and Suppliers in the China

Posted on January 6, 2023May 5, 2023 by Adminsoft

We specialize in producing all kinds of cleaning cards, which are suitable for all kinds of card reading equipment. Since we applied for and obtained the national patent in 1996 , we have been committed to the development of this field, and have won praise from customers for our diversified products, stable quality, timely delivery and flexible service. Regular use of cleaning cards to clean your machine will keep your machine in working condition and prolong its lifespan. We can clean all these devices with cleaning cards: bank card terminals, money counters, ATMs , POS terminals, card printers, thermal printers, fuel dispensers, access control devices, pay phones, vending machines, ticket vending machines, hotel doors Locks, key cards, etc.

CR80 Cleaning cards

Yousite Professional Card Reader Cleaning Kit

Dirt and dust can get trapped in the card reader, causing it to malfunction and errors. ATM machine cleaning card CR80 is a kind of cleaning product.

A card reader is a type of electronic device that reads all kinds of magnetic cards. It is very common and practical in daily life, precisely because this kind of equipment is common and used frequently, if it is not maintained and cleaned, it is inevitable that there will be problems such as insensitivity of card reading or other malfunctions. Therefore you need professional card reader cleaning products.

Here I recommend the CR80 cleaning card , ipa cleaning swab , cleaning wipes and other packaged products specially produced by Shenzhen Yousite Company. The CR80 cleaning card is used to clean the card slot of the card reader. The cleaning cloth is mainly A simple cleaning of the surface of the card reader. The combination of these products can provide simple, convenient and effective maintenance for various card reader equipment, greatly prolonging the service life of the equipment and reducing the probability of failure. If you need it, please contact the relevant sales personnel of Yousite Company immediately, and we will serve you at any time.

Card Printer Cleaning Roller

Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.

The card printer cleaning rollers is a product specially designed to clean the card when producing the card. Put the cleaning rollers into your printer, the cleaning rollers will absorb the dust particles on the card during printing, which will prolong the life of your print head and improve the quality of your card punching.

Watch out for a lot of dust particles on your cleaning rollers, or clean it after every 250 cards printed.

Note your printer model, it may have one or two cleaning rollers.

Instructions:

1. Open the top cover of the machine.

2. Remove the ribbon and printer cleaning roller from the printer.

3. Locate and remove the cleaning roller between the two ribbon drive rollers.

4. Peel off a layer of thin paper on the cleaning card, attach the cleaning card to the cleaning rollers and drag the cleaning card overturned to make it absorb the dirt and dust on the cleaning rollers to the cleaning card.

China trusted factory direct printer cleaning card production company

Shenzhen Yousite with more than 20 years of professional experience in developing, producing and selling dust-free clean room products. Yousite company specializes in the production of various industrial cleaning products such as cotton swabs, cleaning cards, and cleaning consumables. Our company has its own independent laboratory and production base. At present, our main business is including card printer cleaning cards, cleaning rollers, cleaning kits , etc. All our products are produced in 100-class clean rooms, and the production process is all carried out in accordance with relevant dust-free production specifications to ensure the maximum quality of products.

An OEM manufacturer for some large multinational companies. Because our company’s products are reliable and guaranteed. So our products are exported to developed countries and regions in Europe and America. If you need cleaning cotton swabs, cleaning cards and cleaning kits, please contact us in time. I believe that our company will not let you down.

Email(beck): beck@yaostbio.com

Best Way To Clean Credit Card Reader

Posted on December 10, 2022May 5, 2023 by Adminsoft

When the card printer LCD screen displays “CLEAN PRINTER” or the printed image is not clear or complete. It is necessary to use a special cleaning card to clean the printer. In addition, during the printing process, when the sensor is dirty and the card is frequently stuck in the flipper and the “Mechanical” mechanical error is reported, it is also necessary to use a special cleaning card to clean it.

How to clean your credit card machine: tips and steps to follow.

The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer. So please try not to place the printer in a workplace with too much dust or strong sunlight.

Regular cleaning of the printer will keep the printer in top condition, produce better quality results and avoid breakdowns.
Before cleaning the printer, please clean the dust around the inside of the printer. (The surrounding dust may be rotated during printing, floating in the machine, and adsorbed on the print head due to static electricity, causing the print head to break the needle ) Cleaning wipes . Then use the cleaning card to clean the card reader ribbon.
Recommended to use cleaning cards to clean all shafts in the machine. Replace the cleaning roller after each roll of ribbon. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings .
Cleaning of any printer consists of three parts. The cleaning rollers cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine. Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong the service life of the print head. It is recommended to purchase related cleaning kits .

Before cleaning the printer, please use a cleaning swab to clean the dust inside and around the printer. (The dust floating inside the printer may generate static electricity during the printer’s working process. The dust is easy to attach to the print head and cause the print head to break the needle.) And then clean it with a cleaning kit.
Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card. And the cleaning effect cannot be achieved.

Be careful not to damage the print head when opening or closing the cover.

Do not carry hard objects such as watches and rings when inspecting the machine. It is easy to touch the print head and damage the print head.

How To Clean A Chip Card Reader

Posted on December 10, 2022May 5, 2023 by Adminsoft

How to clean a chip card reader?

What are the precautions for the use of IC card readers 1. Plug-in card holder

1. For the plug-in card holder, care should be taken to prevent the card from being inserted too hard. Too much force will damage the in-position switch of the card holder, and it will also damage the card to a certain extent.

2. Pay attention to keep the card clean. If the chip of the card is not clean, not only the card will not work normally, but also the contact point of the card holder will be polluted.

3. It is very important to operate after the card is in place. If the reader powers on the card under unstable conditions, it may cause damage to the card.

4. After the operation of the card in the plug-in card holder is completed, the application program should first send a command to the reader to power off the card, and then pull out the card after power off. Pulling out the card without power off may cause damage to the card.

2. Push-push deck

1. The push-push card holder adopts the push-in card, and the card will pop out when the card is pushed in again when it is taken out. This structure reduces the friction between the card and the electric shock, and has certain advantages in protecting the card. But it can also damage the card if not used correctly.

2. The most common error is that when taking out the card, instead of pushing it in again to make the card pop up automatically, and directly pulling the card out, this situation will seriously damage the card and the card holder.

3. Pay attention to keep the card clean. The card holder of any structure will eventually be in close contact with the chip of the card, so if the chip of the card is not clean, it will pollute the contacts of any kind of card holder.

3. The environment and method of using the IC card

Proper storage and correct use of cardholders are the most economical and effective means to prolong the service life and reliability of IC cards. Proper storage, no random bending, no random contact with the contacts, no random access to strong static electricity environment, pay attention to keep the card surface clean, etc., will help to improve the reliability of the IC card and prolong its service life.

4. Use of cleaning card

The cleaning card is a cleaning measure used after the reader has been used for a period of time and the contacts of the deck are polluted. The method of using the cleaning card is: insert the cleaning card into the reader-writer when the power is cut off, and then clean the electric contact of the deck after inserting it back and forth.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

The cleaning card is made of polyester, polyethylene, polypropylene or hard paper.

The base material of the CR80 cleaning card is PVC, and the two sides are laminated with wood pulp polyester spunlace cloth, which is soaked in IPA solution.

Inserted into the card machine, and inserted and pulled out several times to clean the card. It is very convenient to clean the contact surface of the machine, and the effect is obvious, which can effectively ensure the long-term normal operation of the card machine.

How to Clean a Card Reader?

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

1
1. The IC card reader should be placed on a fixed platform, away from strong magnetic fields. The working environment should be kept tidy, and the surface of the machine should be kept clean.
2
2. Do not allow foreign matter to enter the IC card reader from the cardholder entrance. Including water, oil, etc.
3
3. Regularly clean the deck to keep reading and writing correct. Method: Dip the “cleaning card” with a little alcohol, insert it into the card holder, move back and forth, left and right for several times, then pull it out, wait for a few minutes and then use it.
4
4. If the IC card reader is faulty, please hand it over to the maintenance personnel.
5
5. If it needs to be transported, please use the original packaging to avoid severe impact.

Precautions

To prolong the life of the IC card reader, you must maintain the IC card reader.

IC card (Integrated Circuit Card,), also known as smart card, smart card (Intelligent card), microcircuit card or microchip card, etc.

Where is The Cleaning Card Manufacturer?

Posted on December 9, 2022December 9, 2022 by Adminsoft

Where is the cleaning card manufacturer? Which is the better quality

Where are the manufacturers of cleaning card products? Which one is better in quality! Clean Kachina brand – Yousite! Yousite company specializes in the production of cleaning cards , dust-free cotton swabs, cleanroom cotton swabs, etc., with reliable quality, selling well all over the country, and being praised by new and old customers! Welcome new and old customers to consult and purchase: beck@yaostbio.com .

1. In terms of product quantity

The number of cleaning card products must be effectively increased and expanded, not only to meet the growing needs of domestic printer manufacturers, but also to adapt to the latest developments in foreign printer production, actively expand exports, and actively provide foreign printer companies with what they need. Printer cleaning card products required.

2. In terms of product quality

Keep your Fargo ID card printer running smoothly with this 86177 Cleaning Kit with 3 long cleaning cards, 10 adhesive cleaning cards, and 4 cleaning swabs.

In terms of product quality, we must also strive for excellence. To manufacture advanced and high-quality products, the quality must be stable and reliable, not only to meet the precise requirements of the process, but also to ensure the processing quality of the printer. Rod head goes one step further to improve product quality and cleaning effect.

3. In terms of product categories

The types of cleaning card products must also be continuously increased, not only horizontally, but also vertically, to increase the breadth and depth of products, to continuously expand and extend on the original basis, and more importantly, to check for deficiencies and fill in gaps, and strive to be complete. .

Special Cleaning Card, Cleaning Kit for Precision Instruments

Posted on December 8, 2022January 23, 2025 by Adminsoft

Special cleaning card and cleaning kit for precision instruments

In the world of precision instruments and electronic equipment, regular maintenance is the cornerstone of peak performance and long-term reliability. Cleaning is an integral part of this maintenance, ensuring that devices remain free from contaminants that could compromise their functionality.

To meet these needs, advanced cleaning products such as cleaning cards and tools have been developed, providing exceptional cleaning performance with simplicity and efficiency.

Our cleaning cards are laminated with PVC and polyester wood pulp composite cloth, which has excellent water absorption and toughness, and the wood pulp can absorb the IPA solution to slow down the evaporation time.

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

我们的清洁卡采用PVC和涤纶木浆复合布层压而成，其具有优异的吸水性和韧性，木浆可吸收IPA溶液，以减缓蒸发时间。

All kinds of precision instruments special cleaning card, by the company’s own R & D, production. It is made of PVC material, special precision instrument, cleaning agent, non-woven flannel and vacuum aluminum plastic packing.

适用于专各种磁条刷卡器，IC卡读写器，银行自助设备，加油机等精密设备磁头、IC触点、读写头的清洁。

Apply to all kinds of magnetic stripe card reader, IC card reader, bank self-service equipment, refueling machines and other precision equipment head, IC contacts, reading and writing head cleaning.

Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)

兼容粘尘卡采用低粘粘性纸，可以清洁证卡打印机传送轮和粘尘轮上的灰尘，以避免损坏打印头并确保打印的质量。根据打印机的操作指南进行清洁即可。

Compatible adhesive cards use low-tack adhesive paper, which can clean the dust on the transfer roller and adhesive roller of the card printer to avoid damage to the print head and ensure the quality of printing. Clean it according to the printer’s operation guide.

能有效的防止精密电子设备由于灰尘、油污和水份引起的设备故障。

It can effectively prevent the breakdown of equipment caused by dust, grease and water.

使用简单方便，有效存贮时间为两年。有一定的溶液性清洁剂刺激性，无腐蚀性。易燃，避光，通风处保存。

It is simple and convenient to use, and the storage time is two years. There is a certain solution detergent, irritating, non corrosive. Flammable, protected from light and stored in a ventilated place.

Why Invest in High-Quality Cleaning Solutions?

Precision instruments and electronic devices represent significant investments for businesses. Protecting these assets through regular maintenance is essential to maximizing their value and performance. High-quality cleaning solutions are an affordable and effective way to achieve this, providing long-term benefits that outweigh their cost.

By incorporating regular cleaning into maintenance routines, businesses can:

Reduce repair and replacement costs.
Minimize equipment downtime.
Enhance operational efficiency.
Maintain customer satisfaction through consistent performance.

Choose the right cleaning products today and experience the difference they can make in maintaining your precision instruments.

Cleaning Cards, Wipes & Supplies for ATM Equipment

Posted on December 3, 2022June 23, 2023 by Adminsoft

High-Quality ATM Cleaning Card

This Presaturated Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo, and optic sensors on all types of reader mechanisms.

The card Reader requires preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads

1. Products Description This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo, and optic sensors on all types of reader mechanisms.

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

2. Cleaning Cards Specification

High-quality Evolis card printer cleaning card/cleaning kit;
Excellent cleaning effect
Credit card size
Cleaning card

CR80 Cleaning Card Printer Cleaning Consumables

3. Cleaning Cards Application

1) All Card Readers
2) ATM/POS Terminals
3) Petroleum Pumps
4) ID Printers
5) Optical/Barcode
6) Hotel Doorlock
7) Slot/Vending Machine

Card Reader cleaning cards Description:


Card Dimensions (L x W)	2 1/8 “ x 3 3/8”
Card Thickness	0.028” (+ 0.002 / – 0.001)
Card Construction	Non-woven / plastic / non-woven
Saturation	99% Isopropyl Alcohol
Saturation Volume	3 ML (+/- 0.5 ML)
Inner Pack	50 saturated cards
Inner Pack Weight	0.68 lbs
Inner Pack Dimensions	H: 3 11/32” W: 5 ¼” D: 2 3/8”
Inner Pack Construction	Standard Clay Coated Chipboard Box

Standard Packing

25 pcs per box,100 boxes per case .

Cleaning wipes

IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

IPA-soaked cleaning wipes

Thermal Printer and Check Scanner Cleaning Card

Posted on December 3, 2022May 5, 2023 by Adminsoft

Thermal Printer and Check Scanner Cleaning Card

Detailed introduction to Thermal Printer and Check Scanner Cleaning Card:

Thermal Printer Cleaning Cards were developed to provide a preventive Maintenance cleaning to remove dirt and debris from print heads.

By cleaning Your Thermal Printer on a regular basis you are maintaining the print image, Extending the life of the print head, and will have accurate and readable Print/barcode images.

Cleaning Card width should be determined by the maximum width of your thermal print head.

We can provide various sizes to fit most the thermal printer type. Cleaning cards, ATM/POS terminals cleaning cards Card Reader.

Cleaning Cards, suitable for all card readers, card printers, ATM/POS terminals, petroleum machines, smart cards, etc.

Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads

Thermal printers cleaning cards zebra magicard evolis card printer cleaning card
Card reader cleaning cards will safely and effectively remove dirt, magnetic oxides, oils, lotions, and other pollutants built on the magnetic heads.
Cleaning cards are a cost-effective way to maintain your card readers and prolong the life of magnetic heads.

It will clean:
Swipe ATMs Credit/Debit card readers POS terminals PVC card printer Access control card reader Gas station equipment Pay phones Hotel door locks Parking system equipment IC card readers Smart card readers More manual swipe readers and insertion readers Usage: To clean the swipe readers: Simply swipe the cleaning card through the card reader back and forth,until there are no residues in card reader.
To clean the insertion readers: Insert the cleaning card into the reader,then quit. Repeat this action several times,until there are no residues in card reader. After cleaning, simply dispose of the card. We recommend: Once per day for external or high usage card readers.

Card Readers Cleaning card

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.

Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads Card reader cleaning cards will clean:

Credit & Debit Card Swipe Terminals
POS Terminals
Swipe ATM Machines
Petroleum Pump Card Readers
Credit Vending Machines
Security/Time/Badge Readers
Smart Card Readers
Telephone Card Readers
Slot Machines
Hotel Door Locks
Key Card Readers

Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.

Yousite Examine Scanner cleaning card This Presaturated Cleansing Card is layout to clean effectively as it transfers through the feed course cleaning up the Sensitive Magnetic Heads, Lens, and also Move Rollers. This card protects against processing hold-ups and misreads as it gets rid of contaminants from check viewers/ scanner/MICR feed courses, rollers, as well as heads. A larger Surface Area Cleaning Card with a Broader Width and Longer Size design permitted the Scanner to Clean better and More Effectively. Preventive Upkeep Cleansing Cards have been accepted by OEMs to supply a Positive Cleansing Efficiency and also expand the Life span of the Examine Scanner.

Remove dust, debris, and oils that build up over time during the normal operation of your remote deposit check scanner. Check Scanner Cleaning Kit

Sizes Setup are readily available with a Basic thickness of Tolerance: 0.012″ +/- 0.003″ or (0.305 +/- 0.0762 in mm).

– 2.0 x 6.0 (inches) or 50.8 x 152.4 (mm).
Component Number: CSCC- 0206.
– 2.5 x 6.0 (inches) or 63.5 x 152.4 (mm).
Component Number: CSCC- 2506.
– 4.0 x 6.0 (inches) or 101.6 x 152.4 (mm).
Component Number: CSCC- 0406.
– 4.375″ X 8″ X 0.018″ or 111 X 203 （ mm).
Part Number: CSCC- 437508.
– 4″ X 8″ X 0.012″.
Part Number: CSCC- 0408.
– 4″ X 10″ X 0.012″.
Component Number: CSCC- 0410.
– 4.5″ X 7.25″ X 0.012″.
Part Number: CSCC-45725.

Pre-saturated as well as individually secured.

Lowers residue build-up without taking apart devices.

Quick, easy, economical preventative upkeep.

Application:

Tags and Invoices thermal printer cleansing card, including Receipt Printers/ Upc code Printers as well as Label Printers, and Tickets.
Printers, Airline Boarding Pass Printers, or Readers Cleansing Cards.

– Suggested Use: Once each day in high-use areas and when each week in reduced-usage areas.