Home » Clean Graphics Card With Alcohol

How Do You Clean Printer Labels?

Posted on January 28, 2023January 28, 2023 by Adminsoft

When you use a barcode printer, you often encounter some problems. Come and see if you have encountered the same problem, let us solve it together?

1. Ribbon deviation during printing: the main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor cutting quality of the ribbon.

2. The printing is not clear and the quality is poor: there may be the following reasons: (1. The temperature of the print head is too low or the print density is too light; 2. The print head is not installed correctly; 3. The print head needs to be cleaned)

3. There is always a shallow thin line on the label printed by the printer: If your printer has such a problem, it proves that you have not done enough to maintain the printer.

When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.

If the printer punches a card and a large area of the card is not printed, there are two possibilities:

1. The print head is seriously damaged.

2. The data cable of the print head is damaged. (The damage of the print head is irreparable. In this case, only a new print head should be replaced.)

The way to avoid this situation is to:

1. Pay attention to cleaning the printer regularly.

2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions).

3. Be careful not to touch the print head when opening or closing the case cover.

4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).

4. Occasionally, some spots will appear on the label printed by the printer: 1. If there are some spots on the card you printed out, it is because there is dust in your printer, which needs to be cleaned in time.

It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage. 2. If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head. 3. The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (each card should be wiped with an eye cloth before printing), so that the printed card will not be flawed.

5. How to solve the problem of ribbon wrinkling

Reasons: 1. The carbon ribbon is not correctly wrapped around the machine; 2. The temperature setting is not correct; 3. The pressure and balance setting of the print head is not correct; 4. The media is not correctly set to feed the paper.

Solutions: 1. Reinstall the medium correctly; 2. Adjust the printing temperature to meet the printing requirements as much as possible; 3. Reset the lower pressure required for printing; 4. Reset the correct paper feeding amount of the medium.

If you have other questions, you can log in to our official website and get in touch with us: barcode printer

Clean the barcode printer regularly to ensure the printing quality:

1. When doing other things to expose the print head, remove rings, watches, long necklaces, status cards and any metal objects that touch the print head. Do not turn off the power of the printer when it is exposed near the print head, but to ensure stability. We recommend that you turn off the power. If the power is turned off, the user will lose temporary settings such as label formats and must reload these settings before resuming printing.
2. Only the designated cleaning agent should be used.

Steps to clean the barcode printer card:

1. Turn the power switch to the “ON ( | )” position, then press and hold the multi-function button for 5 seconds.
2. At the beginning of cleaning, the message REMOVE RIBBON THEN CLOSE LID will appear on the LCD.
3. After the ribbon is taken out and the cover is closed, the message EMPTY FEEDER THEN CLOSE COVER will be displayed.
4. If the lid is opened without removing the ribbon and then closed, the REMOVERIBBON THEN CLOSE LID message will continue to be displayed.
5. After removing the ribbon and closing the cover, the firmware will eject the unique card in the printer. The audio EJECTING CARD will be displayed.
6. The LCD will then show FEED LONG CLEANING CARD . In response to a cleaning card, the rollers feed the card into the printer.
7. When the card ejection sensor no longer detects the long cleaning card, the message INSERT FEEDER CLEANING CARD will be displayed. Open the feeder cover and insert the feeder cleaning card.

Cleaning Cards For Banknote Counters

Posted on January 11, 2023May 5, 2023 by Adminsoft

Banknote Counter Cleaning Card, Money Counter Cleaning Card-Yousite

The Banknote counter is an indispensable tool in the financial field. Banknote counters are widely used in banks, companies and other financial enterprises such as securities companies and funds.

However, during the process of use, the sensor head on the banknote counter will inevitably be polluted by the dust and dirt on the banknotes, and may become insensitive or jammed.

Therefore, daily maintenance and cleaning are required to prevent malfunctions.

What products do you need to use to clean the banknote counter without damaging the banknote counter itself?

Shenzhen Yousite Company is a professional manufacturer of all kinds of cleaning cards. For the cleaning of currency counters and other equipment, there is a special production of cleaning cards for currency counters. Vacuum-packed after soaking in relevant organic cleaning solutions. The use of this cleaning wipes is very simple. Simply disassemble and wipe gently to clean the sensor head of the Banknote counter, improve the recognition effect, and reduce the chance of equipment failure.

Applicable models for product use

Card Printer Cleaning Card Manufacturer with OEM Service

CR80 cleaning card cleans the read head and entire track of a magnetic stripe reader in one pass.

: Zebra, Fago, Evolis, Diebold, IBM, NCR, Omron, Nantian, Fujitsu, Radio and Television Express and other ATM teller machines can be adapted, ordinary card machines, passbook card machines, supermarket POS terminals, banks Passbook printers, passbook readers and other color card printers, ATM teller machines with magnetic strip single-sided cleaning cards, magnetic card machines, ATM teller machine double-sided cleaning cards, passbook printers, double-sided cleaning cards, color card machines single-sided cleaning cards .
It is widely used in cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health and various public places. Product composition and principle Cleaning card It is a cleaning product composed of ultra-pure solvents, additives and composite materials with strong adsorption capacity. It is processed by high-tech production technology. It can quickly and safely remove thermal printers and electronic equipment. , Dust, oil stains and other stains on electronic instruments, meters and parts can effectively prevent program disorder, abnormal operation, control failure, performance degradation, PCB corrosion and other hazards.

product name	Specifications	unit	Package
CR80 magnetic stripe flocking cleaning card	54*86mm	open	Packaging according to customer requirements

Product Features

Efficient: can quickly remove dust, oil and water particles, and can even clean parts that cannot be touched by hands.
Safety: no corrosion to metal, rubber, plastic, nylon, resin and various electronic components.
Pure: completely volatile Non-toxic , fast drying 1.4: Convenience: easy to carry, easy to use, easy to store.
Features: Odor: solution taste Voltage resistance: 350kv flammable.

Instructions for use: 2-3 times/day in high-density dust environment; medium-density dust environment 1 -2 times/day; 1 time/day in a low-density dusty environment.

Precautions: Do not approach fire and heat sources when using.

Card Printer Cleaning Card Manufacturer with OEM Service

Posted on January 10, 2023May 5, 2023 by Adminsoft

China trusted factory direct printer cleaning card production company

Shenzhen Yousite company is a company with more than 20 years of professional experience in developing, producing and selling dust-free clean room products.

Yousite company specializes in producing all kinds of cleaning swabs, cleaning cards , cleaning consumables and other industrial cleaning supplies.

Our company has its own independent laboratory and production base. At present, our main business is including card printer cleaning cards, cleaning wheels, cleaning kits, etc.

All our products are produced in 100-class clean rooms, and the production process is all carried out in accordance with relevant dust-free production specifications to ensure the maximum quality of products.

At present,as an OEM manufacturer for some large multinational companies, because our company’s products are reliable and guaranteed.

So our products are exported to developed countries and regions in Europe and America. If you need cleaning swabs, cleaning cards and cleaning kits, please contact us in time. I believe that our company will not let you down.

What kind of product is the CR80 cleaning card?

CR80 cleaning card is a relatively common cleaning consumable in the industry.

Used in various types of card printers and card inlets of POSE machines, clean hotel door systems and IC cards.

Cleaning of fuel dispensers, automatic ticket machines, etc., are very versatile. And this kind of cleaning card is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

1. The main material of CR80 cleaning card: it is wood pulp polyester mixed material, soaked in IPA solution.

2. The size of the CR80 cleaning card is: 54 x 86 x 0.96 mm, and the net weight of the bare package is 4.6g.

3. The packaging of the CR80 cleaning card is: single-piece aluminum foil bag, 50 pieces/box, 50 boxes/carton.

4. The size of the CR80 cleaning card outer packing box is: 345*270*470.

Advantages

Efficient: It can quickly remove dust, oil and water,

Safety: No corrosion to metal, rubber, plastic, nylon, resin and various electronic components.

Pure: Completely evaporates without residue, dries quickly.

Convenience: easy to carry, easy to use, easy to store.

Characteristics: Odor: Solution smell.

Uses: Widely used in cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health and various public places.

Instructions

How to use: Tear open the notch of the packaging bag, take out the cleaning card, insert it into the slot of the card reader, and then enter the automatic cleaning state.

Guidelines for use: 2-3 times/day in a high-density dust environment; 1-2 times/day in a medium-density dust environment; 1 time/day in a low-density dust environment.

Precautions: Do not approach fire and heat sources when using.

How To Clean A Chip Card Reader

Posted on December 10, 2022May 5, 2023 by Adminsoft

How to clean a chip card reader?

What are the precautions for the use of IC card readers 1. Plug-in card holder

1. For the plug-in card holder, care should be taken to prevent the card from being inserted too hard. Too much force will damage the in-position switch of the card holder, and it will also damage the card to a certain extent.

2. Pay attention to keep the card clean. If the chip of the card is not clean, not only the card will not work normally, but also the contact point of the card holder will be polluted.

3. It is very important to operate after the card is in place. If the reader powers on the card under unstable conditions, it may cause damage to the card.

4. After the operation of the card in the plug-in card holder is completed, the application program should first send a command to the reader to power off the card, and then pull out the card after power off. Pulling out the card without power off may cause damage to the card.

2. Push-push deck

1. The push-push card holder adopts the push-in card, and the card will pop out when the card is pushed in again when it is taken out. This structure reduces the friction between the card and the electric shock, and has certain advantages in protecting the card. But it can also damage the card if not used correctly.

2. The most common error is that when taking out the card, instead of pushing it in again to make the card pop up automatically, and directly pulling the card out, this situation will seriously damage the card and the card holder.

3. Pay attention to keep the card clean. The card holder of any structure will eventually be in close contact with the chip of the card, so if the chip of the card is not clean, it will pollute the contacts of any kind of card holder.

3. The environment and method of using the IC card

Proper storage and correct use of cardholders are the most economical and effective means to prolong the service life and reliability of IC cards. Proper storage, no random bending, no random contact with the contacts, no random access to strong static electricity environment, pay attention to keep the card surface clean, etc., will help to improve the reliability of the IC card and prolong its service life.

4. Use of cleaning card

The cleaning card is a cleaning measure used after the reader has been used for a period of time and the contacts of the deck are polluted. The method of using the cleaning card is: insert the cleaning card into the reader-writer when the power is cut off, and then clean the electric contact of the deck after inserting it back and forth.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

The cleaning card is made of polyester, polyethylene, polypropylene or hard paper.

The base material of the CR80 cleaning card is PVC, and the two sides are laminated with wood pulp polyester spunlace cloth, which is soaked in IPA solution.

Inserted into the card machine, and inserted and pulled out several times to clean the card. It is very convenient to clean the contact surface of the machine, and the effect is obvious, which can effectively ensure the long-term normal operation of the card machine.

How to Clean a Card Reader?

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

1
1. The IC card reader should be placed on a fixed platform, away from strong magnetic fields. The working environment should be kept tidy, and the surface of the machine should be kept clean.
2
2. Do not allow foreign matter to enter the IC card reader from the cardholder entrance. Including water, oil, etc.
3
3. Regularly clean the deck to keep reading and writing correct. Method: Dip the “cleaning card” with a little alcohol, insert it into the card holder, move back and forth, left and right for several times, then pull it out, wait for a few minutes and then use it.
4
4. If the IC card reader is faulty, please hand it over to the maintenance personnel.
5
5. If it needs to be transported, please use the original packaging to avoid severe impact.

Precautions

To prolong the life of the IC card reader, you must maintain the IC card reader.

IC card (Integrated Circuit Card,), also known as smart card, smart card (Intelligent card), microcircuit card or microchip card, etc.

Where is The Cleaning Card Manufacturer?

Posted on December 9, 2022December 9, 2022 by Adminsoft

Where is the cleaning card manufacturer? Which is the better quality

Where are the manufacturers of cleaning card products? Which one is better in quality! Clean Kachina brand – Yousite! Yousite company specializes in the production of cleaning cards , dust-free cotton swabs, cleanroom cotton swabs, etc., with reliable quality, selling well all over the country, and being praised by new and old customers! Welcome new and old customers to consult and purchase: beck@yaostbio.com .

1. In terms of product quantity

The number of cleaning card products must be effectively increased and expanded, not only to meet the growing needs of domestic printer manufacturers, but also to adapt to the latest developments in foreign printer production, actively expand exports, and actively provide foreign printer companies with what they need. Printer cleaning card products required.

2. In terms of product quality

Keep your Fargo ID card printer running smoothly with this 86177 Cleaning Kit with 3 long cleaning cards, 10 adhesive cleaning cards, and 4 cleaning swabs.

In terms of product quality, we must also strive for excellence. To manufacture advanced and high-quality products, the quality must be stable and reliable, not only to meet the precise requirements of the process, but also to ensure the processing quality of the printer. Rod head goes one step further to improve product quality and cleaning effect.

3. In terms of product categories

The types of cleaning card products must also be continuously increased, not only horizontally, but also vertically, to increase the breadth and depth of products, to continuously expand and extend on the original basis, and more importantly, to check for deficiencies and fill in gaps, and strive to be complete. .

Special Cleaning Card, Cleaning Kit for Precision Instruments

Posted on December 8, 2022May 5, 2023 by Adminsoft

Special cleaning card and cleaning kit for precision instruments

Our cleaning cards are laminated with PVC and polyester wood pulp composite cloth, which has excellent water absorption and toughness, and the wood pulp can absorb the IPA solution to slow down the evaporation time.

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

我们的清洁卡采用PVC和涤纶木浆复合布层压而成，其具有优异的吸水性和韧性，木浆可吸收IPA溶液，以减缓蒸发时间。

All kinds of precision instruments special cleaning card, by the company’s own R & D, production. It is made of PVC material, special precision instrument, cleaning agent, non-woven flannel and vacuum aluminum plastic packing.

适用于专各种磁条刷卡器，IC卡读写器，银行自助设备，加油机等精密设备磁头、IC触点、读写头的清洁。

Apply to all kinds of magnetic stripe card reader, IC card reader, bank self-service equipment, refueling machines and other precision equipment head, IC contacts, reading and writing head cleaning.

Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)

兼容粘尘卡采用低粘粘性纸，可以清洁证卡打印机传送轮和粘尘轮上的灰尘，以避免损坏打印头并确保打印的质量。根据打印机的操作指南进行清洁即可。

Compatible adhesive cards use low-tack adhesive paper, which can clean the dust on the transfer roller and adhesive roller of the card printer to avoid damage to the print head and ensure the quality of printing. Clean it according to the printer’s operation guide.

能有效的防止精密电子设备由于灰尘、油污和水份引起的设备故障。

It can effectively prevent the breakdown of equipment caused by dust, grease and water.

使用简单方便，有效存贮时间为两年。有一定的溶液性清洁剂刺激性，无腐蚀性。易燃，避光，通风处保存。

It is simple and convenient to use, and the storage time is two years. There is a certain solution detergent, irritating, non corrosive. Flammable, protected from light and stored in a ventilated place.

In addition the company also produces clean cloth, clean foam swabs, cleaning rollers and other equipment cleaning tools, diverse styles, to meet the market most of the cleaning needs.

Evolis Primacy Card Printer Regular Cleaning

Posted on March 11, 2022February 11, 2023 by Adminsoft

Evolis Primacy Card Printer Periodic cleaning method through machine panel operation.

The Primacy machine is operated through the machine panel for regular cleaning. Please follow the steps below for regular cleaning:

Repeated runs through the printer with the cleaning card clean the cleaning roller, maintaining print quality and extending the life of the printhead.

How to Clean the Evolis Primacy Printer. Insert the cleaning card in the opened feeder, adhesive face upwards. This starts the cleaning. Adhesive card.

1. Open the printer cover.

2. Take out the ribbon.

3. Close the cover and make sure to hear a click.

4. Open the card feeder on the printer.

5. Use the ruler to adjust the card thickness to the maximum position.

6. Take out all the cards in the card feeder.

7. Double-click the cleaning button on the control panel, and then insert the cleaning card .

8. Peel off the film on the cleaning card, insert the cleaning card into the card feeder according to the picture, with the sticky side facing up.

9. The used cleaning card will automatically pop into the output tray. Regular cleaning is done.