Where Is The CR80 Cleaning Card Used?

Zebra Evolis Printhead Cleaning with Solution CR80

Zebra Evolis Printhead Cleaning with solution CR80 Thermal Printer Cleaning card

Product Name: Card Printer ATM Machine Swipe Machine Cleaning Card;

Product Model: CR8O Cleaning Card Product Material: PVC card + non-woven fabric;

Commodity Efficiency: Can quickly remove dust, oil and water, even parts that cannot be touched by hands Clean and clean

Packing method: Neutral packaging, aluminum foil bag Sealed packing: 50 pieces/box 2500 pieces/box 50 boxes/box

Product specifications: 85mmx54mmx0.711mm (length x width x thickness) (General card printers card machines ATM machines can Applicable)

CR80 cleaning card aluminum foil bag sealed independent packaging, easy to tear, easy to carry

Our material is Blend cellulose polyester spunlace, not 100%polyester.

How to Clean Card Reader

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

Sorbency is excellent . Volatile time is longer.
Cleaning Card CR80
50 Cleaning Cards Per Box
54 X 85 X 0.711 mm
Part Number : CR80
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up. Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads

Evolis Complete Cleaning Kit

Evolis Primacy Card Printer Regular Cleaning

Evolis Primacy Card Printer Periodic cleaning method through machine panel operation.

The Primacy machine is operated through the machine panel for regular cleaning. Please follow the steps below for regular cleaning:

Repeated runs through the printer with the cleaning card clean the cleaning roller, maintaining print quality and extending the life of the printhead.

How to Clean the Evolis Primacy Printer. Insert the cleaning card in the opened feeder, adhesive face upwards. This starts the cleaning. Adhesive card.

1. Open the printer cover.

2. Take out the ribbon.

3. Close the cover and make sure to hear a click.

4. Open the card feeder on the printer.

5. Use the ruler to adjust the card thickness to the maximum position.

6. Take out all the cards in the card feeder.

7. Double-click the cleaning button on the control panel, and then insert the cleaning card .

8. Peel off the film on the cleaning card, insert the cleaning card into the card feeder according to the picture, with the sticky side facing up.

9. The used cleaning card will automatically pop into the output tray. Regular cleaning is done.

Card Printer Cleaning Roller

Card Printer Cleaning Roller

Card Printer Cleaning Roller

The card printer cleaning wheel is a product specially designed to clean the card when producing the card. Put the cleaning wheel into your printer, the cleaning wheel will absorb the dust particles on the card during printing, which will prolong the life of your print head and improve the quality of your card punching.

It is highly recommended to perform a printer cleaning every time the ribbon is replaced. In addition to using the cleaning card to clean the card channel, each cleaning also includes replacing the card cleaning roller.

Watch out for a lot of dust particles on your cleaning wheel, or clean it after every 250 cards printed.  

Note your printer model, it may have one or two cleaning rollers.

Instructions:  

1. Open the top cover of the machine.  

2. Remove the ribbon and printer cleaning roller from the printer.  

3. Locate and remove the cleaning roller between the two ribbon drive rollers.  

4. Peel off a layer of thin paper on the cleaning card, attach the cleaning card to the cleaning wheel and drag the cleaning card overturned to make it absorb the dirt and dust on the cleaning wheel to the cleaning card.

HiTi CS-220E Card Printer Ribbon not Detected

HiTi CS-220E Card Printer Ribbon not Detected

HiTi developed the CS-220E card printer and reported that the ribbon was not detected when it was powered on

HiTi card printer CS-220E reports 0201 No ribbon detected when the machine is turned on.

If this error occurs, the machine failure can be eliminated from the following points.

1. Check whether the ribbon is installed in the machine, if not, please install the ribbon correctly.

2. Whether the ribbon in the machine is installed correctly, if the ribbon is installed incorrectly, please install the ribbon correctly.

3. The ribbon in the machine is broken, connect the broken part, stick it with tape, and reinstall the ribbon correctly.

4. You can calibrate the sensor for the machine in the printing preferences.

If the machine still reports an error after eliminating the above points, please contact our technical department in time!

Yousite company offers many OEM cleaning card solutions to suit your needs, including private label cleaning card.We are producing card printer cleaning kits and supplying all major brands Manufacturer of a full range of cleaning supplies. We can customize and produce standard size IPA according to customer’s requirements Soak cleaning card, sticky rollers, sticky card, IPA cleaning pen and IPA cleaning cloth

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

Thermal ID Card Printer Cleaning Cards

Thermal ID Card Printer Cleaning Cards

Cleaning your printer is an easy way to help maintain optimal printing performance and quality.
Cards carry debris through the printer’s internal print path that can potentially degrade your image
quality, and damage your printhead or other critical parts of your card printer. With routine cleanings
and replacement of cleaning rollers, you can expect optimal image quality and a longer life for your card printer.

Product Description
Product Name
ID Card Printers Cleaning Card CR80 Cleaning Card
P/N
CR80 cleaning card
Size
85mm x 54mm x 0.711mm
Package
50pcs/bag, 50bags/carton

ID Card Printer Reader Cleans ATM Magnetic Head cleaning card

These double sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides and other contaminants that build up on magnetic and optic reader heads. They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.
Presaturated magnetic head cleaning cards.
Presaturated cards instantly clean heads on point-of-sale credit card readers, access control/ID card readers and all open systems.
Just swipe to clean.
The individually packed cards are non-abrasive and incredibly easy to use.

Features

-Blending spunlace,polyester,cellulose and PVC card.
-Better absorbency than other 100% cleaning card.
-Strong adhesivess.
-No polluted by contaminants
-Electronic-grade IPA
-Safety,Effective,Easy
-Aluminium foil packing make it have strong tightness and keep longer time.

Applications:

Credit Card Readers
Vending Machines
ATM / POS Terminal
Hotel Door Locks
Gas Station Equipment
Pay Phones
And many other applications

We have 3 cleaing cards:ATM cleaning cards,card reader/encoder cleaning card;printer cleaning card

10PCS Head Cleaner Cleaning Card for Magnetic Stripe Reader

10PCS Head Cleaner Cleaning Card for Magnetic Stripe Reader

Functions and Benefits: This double-sided pre-saturated cleaning card is created to securely and efficiently get rid of all dust, dust, ink, magentic oxide and other pollutants that build on magnetic heads of various sorts of visitors.

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.

The cleansing cards are created of 45% wood pulp and also 55% polyester, the wood pulp has outstanding absorbency and can slow down the dissipation of IPA.

It is soaked with a 99.9% IPA remedy that properly gets rid of ink, debris, and deposit build-up on card printer transfer rollers.

The plastic handle of the IPA-soaked swab is full of 99.9% IPA remedy, and it can be used according to the cleansing procedure guide.

Instructions:

1. Tear open the bag and obtain the cleansing card.

2. Swipe the cleaning card via the card reader several times, after that turn it around and also repeat again.

3. Eliminate the card.

4. Repeat the above actions if needed.

Advised Usage:

1. As soon as per day for outside or high-usage card viewers.
2. As soon as each week for inner or low-usage card viewers. Warning: Flammable. Shut out of reach of children. Avoid eyes.

Dimension:3.34″ X2.12″ (85.8 mm X 54mm).

Active Component: Isopropyl alcohol.

Advised for:

All Card Visitors Swipe Atm Machines POS Terminals Access Control Units Hotel Door Locks Pay at the Pump PVC Card Printers Several Other Applications.

Madica M315S card printer cleaning

Madica M315S card printer cleaning and maintenance

In order to better maintain the machine, please clean the machine in time.

Use a cleaning card to clean the color ribbon after a roll of ribbon is used up.

Clean the black belt with a cleaning card in time after printing 500 cards. If the machine is used in a dusty environment, it is recommended to increase the frequency of cleaning with the cleaning card.

1. Use a cleaning pen to clean the print head of the machine when the power is off.

2. The blue cleaning wheel rubber roller in the machine can be taken out frequently and rinsed on the faucet. After the water stains are dry, put it back into the machine. Note that the cleaning wheel rubber roller must be pressed down in place.

3. Use of machine cleaning card :

1) Take out the card from the card feeding box of the machine, take out the ribbon and cover the machine cover.

2) Press and hold the two buttons EJECT and RIBBON SET on the machine panel at the same time to enter the machine menu page: (EJECT on the machine panel: short press – move up, long press – exit or return to the previous level RIBBON SET: short press – move down, long press – confirm or enter the next level)

3) Long press RIBBON SET to enter the menu  

4) Select 1.DIAGNOSIS, long press RIBBON SET to enter 

 5) Unpack the cleaning card, put the cleaning card into the card slot, select 2.CLEAN MODE and press RIBBON SET for a long time to confirm, the machine will clean automatically. (If the cleaning card is cleaned once, you can continue to clean it several times. When the cleaning solution on the cleaning card dries up, the cleaning card can no longer be used, and a new cleaning card needs to be replaced).

How to Clean a Thermal Printer with a Thermal Printer Cleaning Pen

How to Clean a Thermal Printer with a Thermal Printer Cleaning Pen

A thermal printer is a type of printer that creates markings on a label or piece of paper by melting a section of thermal wax ribbon onto it. Thermal printers are typically used to print out barcode tags and labels. Most manufacturers recommend that the print head of the thermal printer be cleaned every time the ribbon is changed. Regular cleanings will prevent you from having to replace the thermal print head often, which is beneficial because the thermal print head is the most expensive replacement part on a thermal printer.

Yousite offers cleaning products designed to help remove adhesives, build-up, and gunky residue from Thermal Printers & liner-free label Printers.

Thermal printer Cleaning Pen

1. Thermal Printer Cleaning Pen Barrel is filled with 99.9% Electronic Grade IPA Solution.

2. Thermal printer IPA cleaning Pen which is designed to effectively remove ink residue, burnt-on debris, dirt, and contaminants from the Print Head.

3. Regular cleaning will extend the service life of the Print Head and achieve High-Quality Graphic Images.

Application

Recommended Usage: Use every time a new roll of the label, thermal paper or ribbon stock is needed or in emergencies to correct lines or imperfections in the printed copy.

Usage Directions:

To clean thermal print heads, swipe the cleaning pen across the entire print head surface.
Repeat if necessary.
To clean the pen tip, wipe across the clean paper surface.

Thermal Printer Head Cleaning Pen 99% IPA Solution

Printhead Cleaning Pen with 99% IPA Solution for Quickly Removing Contaminants from Thermal Printers Including Label Printer,…

All types of a thermal printers.

All brand ID card printers: Zebra, Fargo, Magicard, Evolis, etc.

Pcb, IC, cleaning fields.

We also offer a cleaning kit (including a cleaning card, cleaning swab, cleaning wipes, and cleaning roller)

Thermal Printer Cleaning Pens, 12/Box

This thermal printer cleaning pen is designed for use on thermal printers that have an accessible print head. In short, the printer can be easily opened and the print head itself is exposed. Adding a little pressure as you move the pen across the print head will gently scrub off the burnt-on particles. The heat from the clean print head can then transfer to the print media. The cleaning pen barrel contains 99.7% IPA, the recommended cleaning solution by thermal printer manufacturers. It is recommended by thermal printer manufacturers to clean the print head with every change of paper or label stock for crisply printed material.

Pen Size = 14.5cm Length x 4.5cm Round Width
Pre-saturated felt within the pen
Reduces residue build-up without dismantling equipment
Quick, easy, inexpensive preventative maintenance

Thermal Printer Cleaning Pen Will Clean:

Thermal Print Heads.
POS Thermal Printers.
Thermal Credit Card Printers.
Zebra Label Printers.
And many more applications!

Evolis ACL004 T Cleaning Cards

T Cleaning Cards for Evolis Printers

T Cleaning Cards for Evolis Printers

Compatible Evolis Primacy card printer cleaning card

Product type: T-shaped long cleaning card, short sticky card, long sticky card

Model code: T-shaped long cleaning card (ACL004), adhesive cleaning card (ACL003), long adhesive cleaning (A5070)

Description: T-shaped long cleaning card (54x326mm), adhesive cleaning cards 54 x 90mm, long adhesive cleaning (54x170mm)

Scope of application: cleaning the card passage of the printer

EVOLIS includes T-Cards for deep cleaning the card transport rollers on Evolis Zenius and Primacy printers.

Keeping your Evolis printer clean saves you money by extending the life of your print head and other moving parts.

Fortunately, proper maintenance of your Evolis printer takes very little time.

Evolis Cleaning Kit contains T-Cards and works with Evolis Zenius and Primacy card printers during deep cleaning cycles.

Product functions and features

1. Can effectively clean and maintain equipment
2. Removing dirt can reduce the read failure of the device
3. Simple operation, economical and effective

Yousite is a direct manufacturer of card printer cleaning kits, and the products can completely replace the original products. Not only the product price is low and the quality is high, but it can also reduce the transportation cost. Everything is based on the interests of customers. As long as there is a need, we will try our best to satisfy you. Yousite only makes high-quality products!

Evolis A5002 or CR80

Transport Rollers Cleaning Card

Transport Rollers Cleaning Card

For use with all Evolis card printers · For the cleaning of card transport rollers · Pre-saturated cleaning cards packaged in an individual tear-open pouch.
The subway is a city’s emerging traffic tool, carrying millions of flows daily. Subway cards as carrier material to take the subway, which greatly improves the convenience of people’s travel. However, due to the metro card carrying a lot of dust, the credit card for a long time will cause the card slot card the accumulation of large amounts of dust, affecting the efficiency of a passenger car.

Evolis A5002 or CR80

Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.

These double-sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides, and other contaminants that build up on magnetic and optic reader heads. They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.

Facing this problem, how to solve it?

Yousite’s cleaning card can easily dispose of this puzzle. We are specializing in the production of cleaning cards, cleaning swabs, and cleaning kit manufacturers, for the subway card slot that is easy to dirty, and we are also through continuous testing, making our cleaning cards more easily, and more suitable for all subway stations. When the cleaning card slot is, you can first use our cleaning card clean, and then use a clean foam swab to erase the dust around the corner. If some induction card readers, don’t put try our cleaning cloth, the effect is very good.
In addition, ticket machines, and vending machines in the subway is also can clean our products, if there are good cooperation intentions, may wish to discuss cooperation with Yousite. technology!