Tag Archives: ID Card Printer Cleaning

Can You use 70% Isopropyl Alcohol to Clean Electronics ?

Can You use 70% Isopropyl Alcohol to Clean Electronics ?

Posted on by

Isopropyl alcohol (IPA) is commonly used for cleaning electronics due to its effectiveness and availability. Let’s address your questions:

  1. Is 70% Isopropyl Alcohol Safe for Electronics?

    Thermal Printer Pre-saturated IPA Cleaning Swab

    Lint free, non-abrasive, and pre-saturated with 99.7% IPA (isopropyl alcohol), the foam tips will thoroughly but gently clean delicate parts.

    • Yes, 70% isopropyl alcohol is considered safe for cleaning electronics.
    • However, if you’re working with circuit boards or other electrical components, it’s better to use a higher percentage (99.9%) to avoid leaving behind water residue and impurities.
    • While 70% can work for cleaning adhesive off metal or plastic surfaces, be cautious not to spill it onto circuits or wires.
    • However, using lower concentrations of isopropyl alcohol may corrode some sensitive electronic components and should be avoided unless absolutely necessary. Therefore, avoid using the 70% solution on any circuit boards or other sensitive electronic parts.

  1. Why Use Isopropyl Alcohol for Cleaning Electronics?

    • IPA has several advantages:
      • Dissolves oils, adhesives, soldering flux, residues, fingerprints, and contaminants.
      • Leaves no oils or traces, unlike many ethanol compounds.
      • Evaporates quickly (above 60°F).
      • Relatively non-toxic (in a well-ventilated area).
      • Disinfects viruses and bacteria (at 60/70% concentrations).
      • Mixes with water and evaporates, preventing corrosion damage from liquid spills on electronics.

Remember, always handle IPA carefully, and avoid using acetone directly on electronics due to its strength and potential harm to components. Water and vinegar are suitable for external surfaces but should be applied with care. If you have specific cleaning needs, feel free to ask! 😊

Understanding Evolis Print Head Failures and Maintenance Tips

Understanding Evolis Print Head Failures and Maintenance Tips

Posted on by

Print head failure is one of the problems that may occur during the use of card printers, which may further cause printing quality issues and may also result in relatively high maintenance costs.
In this issue of the article, we will delve into the main causes of print head malfunctions and share some preventive measures.

What is a print head? How does it work in a card printer?

Video: How to clean Evolis Edikio Access printer?

Ensure your Edikio Access printer stays in top condition with regular maintenance. From removing the ribbon to using cleaning tools for the print head, follow these simple steps for optimal printing quality and longevity. Don’t forget, you can also perform cleaning procedures conveniently through the Edikio Print Center software.

The main reasons for Evolis print head failures include:

  1. Accumulation of dust or debris: Long-term lack of cleaning can lead to the buildup of dust or debris inside the printer, potentially causing scratches or blockages on the print head.
  2. Use of dirty cards: Using contaminated cards may introduce dust or dirt into the printer, increasing the risk of print head failures.
  3. Direct contact between the print head and chip: On direct-to-card printers, direct contact between the print head and the raised chip on the card can damage the print head.

To prevent and maintain Evolis print heads, consider the following:

  1. Regular cleaning of the printer: It’s advisable to perform a thorough cleaning of the printer every time you replace the printer ribbon. Regular cleaning helps prevent dust and dirt buildup, protecting the print head from damage. “T” shaped cleaning card
  2. Use of retransfer printers: Retransfer printers do not directly contact the card with the print head, reducing the likelihood of print head damage. Consider using this type of printer for chip card printing.
  3. Avoidance of second-hand equipment: Purchasing second-hand equipment carries risks, as you may not be fully aware of the repair history and condition of the device. Opt for new equipment whenever possible.
  4. Selection of printers with print head protection: Some models of Evolis printers come equipped with print head protection devices. These devices automatically protect the print head when the printer cover is open, preventing accidental shocks and scratches, and extending the printer’s lifespan and print quality.

Finally, the warranty policy for print heads may vary depending on the model of printer purchased. Refer to the specific warranty policy of your device for details.

Cleaning Instructions for Magicard ID Card Printer

Posted on by

It is strongly recommended to clean the printer every time the ribbon is replaced. In addition to using a cleaning card to clean the card channel, each cleaning also includes replacing the card cleaning wheel.

Use our Magicard-compatible cleaning cards to safely and effectively remove dust, debris and residue remaining on the rollers inside the printer. Regular cleaning helps improve the printing quality of the printer and the stability of automatic card feeding.

Magicard Cleaning Kits

Here are the steps to clean a Magicard ID card printer:

  1. Preparation:
    • It’s strongly recommended to clean the printer every time you change the ribbon.
    • Use Magicard’s dedicated cleaning card, which effectively removes dust, debris, and residue from the printer’s internal rollers.
  2. Cleaning the Card Path and Transport Rollers:
    • Press the “MENU” button, select “Clean Rollers” from the menu, and then press “OK” to proceed based on the printer’s prompts.
    • Remove the card hopper from the back of the printer.
    • Open the top cover of the printer and remove the ribbon. Ensure that the cover remains open.
  3. Using the Cleaning Card:
    • Open the packaging of the cleaning card and take out the cleaning card.
    • When the printer screen displays “Ready to Clean,” press the “Yes” button and insert the narrow end of the cleaning card into the horizontal slot at the front of the printer. The printer will automatically take the cleaning card into the internal mechanism for cleaning. Once cleaning is complete, the card will automatically eject.
  4. Optional Second Cleaning:
    • If prompted by the printer screen for a second cleaning, you can remove the card, flip it over, and repeat the cleaning process.

These steps will help improve the print quality of the printer and ensure stable card feeding. Remember to perform this cleaning process regularly to maintain optimal printer performance.

Introducing the Fargo Cleaning Kit

Introducing the Fargo Cleaning Kit: Your Solution for Pristine Printers

Posted on by

In the fast-paced world of modern business, efficiency and reliability are paramount. And when it comes to maintaining the integrity of your ID card printer, there’s no room for compromise. That’s where the Fargo Cleaning Kit steps in – a comprehensive maintenance solution designed to keep your Fargo printer running smoothly and producing pristine cards, every time.

Unmatched Performance Across Multiple Series

Compatible with a wide range of Fargo printer series including the Fargo DTC510, DTC515, DTC515-LC, DTC520, DTC525, DTC525-LC, DTC710, DTC720, and HDP600, this kit is your go-to choice for preventive maintenance and cleaning. Whether you’re dealing with high-volume printing or intricate card designs, the Fargo Cleaning Kit has you covered.

Advanced Cleaning Technology for Superior Results

At the heart of the Fargo Cleaning Kit are its cutting-edge components. The Adhesive Cleaning Card boasts superior adhesive properties, ensuring smooth operation without any risk of card jams. Our Presaturated Cleaning Wipes are saturated with a potent 99.9% IPA solution, effectively removing dust and particles with ease. And for targeted cleaning, our Presaturated Cleaning Pen offers a reusable solution, perfect for multiple maintenance sessions.

Designed for Durability and Convenience

Crafted to withstand a wide range of temperatures, our cleaning supplies guarantee performance in any environment.

The Fargo Cleaning Card, with its PVC plastic core and dual-layer adhesive tape, ensures resilience even in the most demanding conditions.

Our Cleaning Wipes, made from 100% polyester spunlace material, provide a generous surface area for thorough cleaning.

And with our Cleaning Pen’s ergonomic design and convenient packaging, maintenance has never been easier.

Technical Specifications and Features

  • Fargo Cleaning Card:
    • Card Material: PVC plastic core
    • Dual-layer adhesive tape: 50 microns
    • Release film thickness: 100 microns
    • High adhesive force: 5.5N/10mm
    • Temperature range: -30°C to 204°C
    • Rounded corner radius: 4 edges
  • Fargo Cleaning Wipes:
    • Wipe Material: 100% polyester spunlace material
    • Size: 4.5” x 4.5” (inches), thickness tolerance +/- 0.1”; 125 x 125 (millimeters), thickness tolerance +/- 2.54 millimeters
    • Solution content: 99.9% IPA
    • IPA capacity: 1.0 +/- 0.5 milliliters
  • Fargo Cleaning Pen:
    • Barrel Length: 143 millimeters
    • Barrel Diameter: 14.3 millimeters
    • Packaging: 12 pens per box
    • Solution content: 99.9% IPA
    • IPA capacity: 5.0 +/- 0.5 milliliters

In a world where every detail matters, the Fargo Cleaning Kit stands as a testament to excellence. With its unmatched performance, advanced cleaning technology, and durable design, it ensures that your Fargo printer operates at its peak, delivering flawless results with every card. Say goodbye to printing glitches and hello to unparalleled reliability – with the Fargo Cleaning Kit, your printer is in good hands.

Unlock Peak Performance with Datacard Cleaning Kits

Posted on by

In the fast-paced world of card printing, maintaining pristine equipment is paramount to achieving optimal results. Enter Datacard’s comprehensive range of cleaning solutions, meticulously designed to elevate your printing experience to new heights. Let’s explore how these cleaning essentials can revolutionize your printing process:

Datacard 548714-001 Cleaning Cards (10 card pack):
Experience unparalleled cleanliness with Datacard Cleaning Cards. Each pack of 10 cards is engineered to remove debris from cleaning rollers with precision and ease. Compatible with a range of Datacard ID card printers including Select Magna IC, Select IC, Express IC, and Magna, these cards ensure your equipment remains in top condition, guaranteeing flawless prints every time.

DataCard 548714-001 Cleaning Cards

Datacard 548714-001 Compatible Adhesive Cleaning Card uses low-adhesion paper to clean dust from the transfer rollers and adhesive rollers.

Datacard 549718-001 Cleaning Kit – Select, Magna:

Elevate your maintenance routine with the Datacard Cleaning Kit. Featuring a drop-in cleaning roller replaceable by the customer at regular intervals, this kit is a game-changer. With 5 cleaning rollers and 5 cleaning cards tailored for mag stripe and smart card printers, it’s your go-to solution for seamless upkeep.

DataCard 549718-001 Cleaning Kit

DataCard 549718-001 Printer Cleaning Kit includes 5 Sleeves and 5 Cards for Datacard Select and Magna Card Printers with Magnetic Endcoders.

Datacard 557492-001 Alcohol Cleaning Pen:
Precision meets performance with the Datacard Alcohol Cleaning Pen. Engineered for cleaning plastic card printer print heads or card tracks, this pen delivers eight uses of unparalleled cleaning power. Say goodbye to print imperfections and hello to pristine results with every use.

Datacard 557492-001 Cleaning Pen

Printhead cleaning pen contains Isopropanol alcohol proven to effectively clean the printhead from dirt, ink, and other contaminants that have built up over time.

Datacard 557492-001 Cleaning Swabs:
Experience the epitome of printer maintenance with Datacard Cleaning Swabs. Crafted to perfection, these swabs are your go-to solution for maintaining Datacard printers. With each package containing 5 swabs, you’ll have everything you need to keep mishandled cards, diminished image quality, or damaged printheads at bay.

Elevate Your Printing Experience Today:
Unlock the true potential of your Datacard printer with Datacard’s cutting-edge cleaning solutions.

From cleaning cards to maintenance kits, each product is meticulously crafted to ensure your printer operates at peak performance. Say goodbye to print imperfections and hello to flawless results. Choose Datacard cleaning essentials and experience printing perfection like never before.

ID Card Printer Cleaning Kits

ID Card Printer Cleaning Kits

Posted on by

Clean Cards + Clean Printer = Clean Printouts

Regular printer cleaning is important for maintenance. This is true of any card printer, no matter the make or model.

1. Required cleaning kits

1. Cleaning card (used to clean the transfer rollers of the printer);

2. Cleaning cotton swab (for cleaning the print head);

3. Cleaning wet wipes (used to clean the printer cleaning rollers);

ID Card Printer Cleaning Kits

ID Card Printer Cleaning Kits

2. Use of cleaning kits

1. First open the printer and take out the ribbon.

2. Tear off the packaging bag, and put the cleaning card into the card input box of the printer.

3. Open the printing preferences of the card printer driver.

4. Select the Tools tab, and click the Printer Self Cleaning button to clean.

5. After the cleaning is completed, the card will automatically exit.

6. Take out the cleaning swab , squeeze the cotton swab stick, and let the liquid flow out to the head of the cotton swab.

7. Use a cotton swab to gently wipe the print head of the printer (wipe in one direction).

8. Wipe the cleaning rollers with a damp paper towel.

9. Wait for the liquid to dry and the cleaning is complete.

Store cards in a dry, clean environment

Blank white PVC cards are very sensitive and tend to accumulate static electricity. This means that dust and dirt particles are immediately attracted to these surfaces. After unpacking the cards, you must use the cards, or store them in a clean, dry and closed environment, just like the box it came in. Leaving a card out for a period of time can cause dust particles to accumulate on its surface.

clean hands clean card

Our hands and fingers, even when cleaned, have small dust particles and oils in them. These can be easily transferred to cardstock prior to printing. The oils from our fingers can smudge the otherwise pristine surface of the card. When handling cards, remember to only hold the card by its sides or edges. Avoid touching its surface or printed side.

Check Cards Before Printing

Most card printers will print an overlay panel on the card. Since this is usually the last panel in the printing process, any dirt or dust particles will be trapped beneath this panel. It is impossible to remove it without damaging the print or card surface. So checking the cards before printing will save you time and tears.

If you have hair, don’t despair

Of course, when it’s all said and done, when you find yourself staring at the smudges on the surface of a clean card, don’t despair.
Cards don’t have to go in the trash because of a little grime or oil.
Simply clean the surface of the card with a high-quality microfiber cloth and place it back in the card printer.

How To Clean A Barcode Printer

How To Clean A Barcode Printer?

Posted on by
We often use barcode printers in our office life, but we often ignore the maintenance of the printer. In fact, doing a good job of cleaning will greatly improve your work efficiency. Let’s take a look at how to clean it!

1. Cleaning of the print head

　To clean the print head regularly and regularly, cleaning kits can use cleaning swab and alcohol. Turn off the power of the barcode printer, keep the same direction when wiping (to avoid dirt residue when wiping back and forth), turn up the print head, remove the ribbon and label paper, and use a cleaning swab soaked in print head cleaning solution (or cleaning wipes ) ), wipe the print head lightly until it is clean, and then gently dry the print head with a clean cotton swab. Keeping the barcode print head clean can get good printing effect, and the most important thing is to prolong the life of the print head.

Printhead Wipes & Cleaning Swabs for Printers

Printhead Wipes & Cleaning Swabs for Printers

Use a cleaning swab or a swab dampened with isopropyl alcohol to wipe the print element from top to bottom. Also rotate the rollers and clean the platen thoroughly with a cleaning swab. You can use cleaning cards and cleaning pens instead of cleaning swabs, which can better remove stubborn dirt.

Printhead Cleaning Pen with Chisel for Quickly Removing Contaminants from Thermal Printers Including Label Printe.

Printhead Cleaning Pen with Chisel for Quickly Removing Contaminants from Thermal Printers Including Label Printe.

2. Cleaning of the sensor

　　The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The sensor includes a ribbon sensor and a label sensor. See the instruction manual for its location. The cleaning method is to wipe the sensor head with a cotton swab soaked in alcohol, and then dry it.

3. Printer glue stick cleaning

The printer glue stick can improve the printing effect. During the printing process, the label paper will leave a lot of powder on the glue stick. If it is not cleaned in time, it will hurt the print head. Cotton swabs and alcohol can be used to clean the glue stick of the printer. After cleaning, it must be wiped dry.

4. Printer roller cleaning

After cleaning the print head, clean the rollers with a cotton swab (or wipes) soaked in 99.9% alcohol. The method is to rotate the roller by hand while scrubbing, and then dry it after it is clean. The cleaning interval of the above two steps is generally once every three days. If the barcode printer is used frequently, it is best to clean it once a day.

5. Drive system cleaning

Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission, and there is dust, which directly affects the printing effect, so it needs to be cleaned frequently. Usually once a week, the method is to use a cotton swab (or cotton cloth) soaked in alcohol to wipe the shafts of the transmission, the surface of the channel and the dust in the chassis, and then dry it after cleaning.

6. Clean the paper feed guide

There are generally no major problems in the guide groove, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it must be cleaned in time. When cleaning, just pull it out with a finger.

How To Clean A Thermal Printers(video)?

Video: How to Clean your Zebra ZXP Series 3 ID Card Printer?

Video: How to Clean your Zebra ZXP Series 3 ID Card Printer?

Posted on by

🌟 Elevate your Zebra ZXP3 ID card printer maintenance game with our simple steps! 🌟

What you’ll need:

  • Zebra ZXP3 Printer Cleaning Kit, including:
    • Long print engine cleaning card
    • Short card feeder cleaning card
    • Soak lPA sponge swab
    • Cleaning pen
    • Squeeze sponge swab
    • Soak lPA wipes

[Watch the video for step-by-step instructions:

[]

Cleaning Steps:

  1. Ensure the printer is powered on and the LCD display reads “ready.” Hold the control button for five seconds, then follow the LCD prompts.
  2. Remove the ribbon and cards.
  3. Insert the long cleaning card into the manual card feeder. Once cleaning is complete, the card will eject.
  4. Insert the feeder cleaning card into the card feeder. Once cleaning is complete, remove the cleaning card from the feeder slot.
  5. Use a cleaning pen to clean the printhead to remove dust debris and contaminants, improve print quality, and extend the life of the printhead.
  6. You can use a squeeze sponge swb to clean the print head, or you can use a sponge swab with a short or long handle, especially for deep areas.
  7. Use cleaning wipes to clean the interior and exterior housings and contaminated components, as well as parts of the transfer rollers.
  8. The cleaning process is complete! You can now load PVC cards and reinstall the ribbon to start printing.

Get the best deals on Zebra ZXP3 ID card printers, ribbons, and supplies. Choose Yousite company for your ZXP3 needs!

Why Choose ZXP3 Printer?

  • Combines affordability with powerful printing capabilities
  • Ideal for handling complex access cards, smart cards, and high-security financial cards
  • Offers improved image yield and faster printing compared to ZXP1

Contact us for expert advice on selecting the right ID card printer and supplies for your organization’s needs. We offer price matching, free shipping on orders over $100, and accept purchase orders. Reach out to us today!

Cleaning Cards Manufacturers and Suppliers

Cleaning Cards Manufacturers and Suppliers in the China

Posted on by

We specialize in producing all kinds of cleaning cards, which are suitable for all kinds of card reading equipment. Since we applied for and obtained the national patent in 1996 , we have been committed to the development of this field, and have won praise from customers for our diversified products, stable quality, timely delivery and flexible service. Regular use of cleaning cards to clean your machine will keep your machine in working condition and prolong its lifespan. We can clean all these devices with cleaning cards: bank card terminals, money counters, ATMs , POS terminals, card printers, thermal printers, fuel dispensers, access control devices, pay phones, vending machines, ticket vending machines, hotel doors Locks, key cards, etc.

CR80 Cleaning cards

Yousite Professional Card Reader Cleaning Kit

Cleaning ATM Machines Cleaning Cards

Dirt and dust can get trapped in the card reader, causing it to malfunction and errors. ATM machine cleaning card CR80 is a kind of cleaning product.

A card reader is a type of electronic device that reads all kinds of magnetic cards. It is very common and practical in daily life, precisely because this kind of equipment is common and used frequently, if it is not maintained and cleaned, it is inevitable that there will be problems such as insensitivity of card reading or other malfunctions. Therefore you need professional card reader cleaning products.

Here I recommend the CR80 cleaning card , ipa cleaning swab , cleaning wipes and other packaged products specially produced by Shenzhen Yousite Company. The CR80 cleaning card is used to clean the card slot of the card reader. The cleaning cloth is mainly A simple cleaning of the surface of the card reader. The combination of these products can provide simple, convenient and effective maintenance for various card reader equipment, greatly prolonging the service life of the equipment and reducing the probability of failure. If you need it, please contact the relevant sales personnel of Yousite Company immediately, and we will serve you at any time.

Card Printer Cleaning Roller

Zebra 105912-003 Cleaning Roller

Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.

The card printer cleaning rollers is a product specially designed to clean the card when producing the card. Put the cleaning rollers into your printer, the cleaning rollers will absorb the dust particles on the card during printing, which will prolong the life of your print head and improve the quality of your card punching.

 

Watch out for a lot of dust particles on your cleaning rollers, or clean it after every 250 cards printed.  

Note your printer model, it may have one or two cleaning rollers.

Instructions:  

1. Open the top cover of the machine.  

2. Remove the ribbon and printer cleaning roller from the printer.  

3. Locate and remove the cleaning roller between the two ribbon drive rollers.  

4. Peel off a layer of thin paper on the cleaning card, attach the cleaning card to the cleaning rollers and drag the cleaning card overturned to make it absorb the dirt and dust on the cleaning rollers to the cleaning card.

China trusted factory direct printer cleaning card production company

Shenzhen Yousite with more than 20 years of professional experience in developing, producing and selling dust-free clean room products. Yousite company specializes in the production of various industrial cleaning products such as cotton swabs, cleaning cards, and cleaning consumables. Our company has its own independent laboratory and production base. At present, our main business is including card printer cleaning cards, cleaning rollers, cleaning kits , etc. All our products are produced in 100-class clean rooms, and the production process is all carried out in accordance with relevant dust-free production specifications to ensure the maximum quality of products.

An OEM manufacturer for some large multinational companies. Because our company’s products are reliable and guaranteed. So our products are exported to developed countries and regions in Europe and America. If you need cleaning cotton swabs, cleaning cards and cleaning kits, please contact us in time. I believe that our company will not let you down.

Email(beck): beck@yaostbio.com

Best Way To Clean Credit Card Reader

Best Way To Clean Credit Card Reader

Posted on by

When the card printer LCD screen displays “CLEAN PRINTER” or the printed image is not clear or complete. It is necessary to use a special cleaning card to clean the printer. In addition, during the printing process, when the sensor is dirty and the card is frequently stuck in the flipper and the “Mechanical” mechanical error is reported, it is also necessary to use a special cleaning card to clean it.

How to clean your credit card machine: tips and steps to follow.

The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer.  So please try not to place the printer in a workplace with too much dust or strong sunlight.

  • Regular cleaning of the printer will keep the printer in top condition, produce better quality results and avoid breakdowns.
  • Before cleaning the printer, please clean the dust around the inside of the printer. (The surrounding dust may be rotated during printing, floating in the machine, and adsorbed on the print head due to static electricity, causing the print head to break the needle ) Cleaning wipes . Then use the cleaning card to clean the card reader ribbon.
  • Recommended to use cleaning cards to clean all shafts in the machine. Replace the cleaning roller after each roll of ribbon. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings .
  • Cleaning of any printer consists of three parts. The cleaning rollers cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine. Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong the service life of the print head. It is recommended to purchase related cleaning kits .
  • Before cleaning the printer, please use a cleaning swab to clean the dust inside and around the printer. (The dust floating inside the printer may generate static electricity during the printer’s working process. The dust is easy to attach to the print head and cause the print head to break the needle.) And then clean it with a cleaning kit.
  • Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card. And the cleaning effect cannot be achieved.

Be careful not to damage the print head when opening or closing the cover.

Do not carry hard objects such as watches and rings when inspecting the machine.  It is easy to touch the print head and damage the print head.