Ic Reader Cleaning Card Hotel Door Lock

Posted on May 5, 2022May 5, 2023 by Adminsoft

Ic reader cleaning card hotel door lock

Specializing in the production of various types of cleaning cards, suitable for all types of card reading equipment.

Since we applied for and obtained the national patent in 2009, we have been committed to the development of this field, and have won praise from customers for our diversified products, stable quality, timely delivery and flexible service.

Regular use of cleaning cards to clean your machine will keep your machine in working condition and prolong its service life.

Ic Reader Cleaning Card Hotel Door Lock

We can clean all these devices with cleaning cards: bank card terminals, cash counters, ATMs, POS terminals, card printers, thermal printers, fuel dispensers, access control devices, pay phones, vending machines, ticket vending machines, hotel doors Locks, key cards, etc.

1.This card presaturated with IPA
2.It has excellent absorbency
3.Keep the heads clean and health
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up.

Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads

Cleaning card Selling Point :

1. Our material is Blend cellulose polyester spunlace, not 100%polyester
2. Extremely absorbent, It is higher than 100% polyester
3. Volatile time is longer, It is good for cleaning.
4. Our packing is aluminum foil, It is good for storage

Classification introduction of non-contact IC card and contact IC

Non-contact IC card, also known as radio frequency card, is composed of IC chip and induction antenna, which are packaged in a standard PVC card, and the chip and antenna have no exposed parts. It successfully combines radio frequency identification technology and IC card technology, which ends the problem of passive (no power supply in the card) and contact-free, and is a major breakthrough in the field of electronic devices. The card is close to the surface of the reader at a certain distance (usually 5-10cm), and the data reading and writing operations are completed through the transmission of radio waves.

Contactless IC cards:

1). Radio frequency encryption (RF ID)—ID card. The information access of the radio frequency card is accomplished through radio waves. There are no mechanical points of contact between the host and the RF. Such as HID, INDARA, TI, EM, etc. The meal card (thicker) and access control card used by most campuses are ID cards.

2). Radio frequency memory card (RF IC)—–non-contact IC card. Radio frequency memory cards also access information by radio. It increases the radio frequency transceiver circuit on the basis of the memory card. Such as MIFARE ONE. The bus cards used in some cities in the early days, and the meal cards and hot water cards used in some campuses are radio frequency memory cards.

3). The radio frequency CPU card (RF CPU)—–an active card, which adds a radio frequency transceiver circuit on the basis of the CPU card. The CPU card has its own operating system COS, so it can be called a real smart card. Bus cards in big cities, financial IC cards, and meal cards in very few campuses are radio frequency CPU cards. The difference between contact IC card and non-contact IC card: The reliability of contact IC card and non-contact IC card is better than that of magnetic card, and it has a wide range of applications.

The non-contact IC card chip is encapsulated in PVC material, and the radio wave of the chip in the card can be remotely sensed with the card reading device to read the data. In contrast, non-contact IC cards have good confidentiality, high security performance, large storage capacity, and fast transmission speed.

Label, Receipt and Barcode Printer Cleaning Card/Kits

Posted on February 5, 2022December 5, 2022 by Adminsoft

Cleaning Cards/Kits | Label, receipt and barcode printer cleaning card

Whether you utilize paper, linerless labels, or linered label rolls in your printer, a routine cleansing timetable is the very best means to make certain optimal printer performance and print high quality.
Yousite cleansing products will certainly: Eliminate glue residue, dust as well as various other contaminates that can create label jams and cause printer element damage Prolong the life of the thermal printhead and also rollers Keep your published picture looking clean and crisp Cleans printhead, paper guides and paper path
Select from our:

Remove dust, debris and oils that build up over time during the normal operation of your remote deposit check scanner. Check Scanner Cleaning Kit

Expert Cleaning Package Cleaning Cards

Regular cleaning with Yousite Materials can substantially prolong printhead life. View the return on your investment expand with these user friendly regular maintenance items.

Common Faults And Solutions of ZEBRA Barcode Printers

Posted on January 20, 2022February 11, 2023 by Adminsoft

Common faults and solutions of ZEBRA barcode printers

When we use Zebra printers, we will inevitably encounter some operational problems or printer failures because we are not familiar with the printer or have used the printer for a long time. Now Xiaobian has sorted out various common Zebra printer faults and solutions for you

Fault 1: The printing software cannot print Chinese characters

Analysis: Many printing software use the Windows print driver to print Chinese characters through the printing software, so you need to choose a suitable printing program to print Chinese characters.

Solution: Use a good driver, such as Seagull driver, or use BarOne software to directly drive the printer.

Fault 2: Replace the label paper, and the carbon ribbon appears after printing

Analysis: The label printer recognizes the label paper, and the ribbon sensor has a memory function. When replacing the label paper and ribbon, it cannot be recognized.

Solution: The paper needs to be remeasured. Use the Zebra label printer S such as 400, under normal startup, press the MODE button three times and then press the FEED button. At this time, a lot of paper will come out. When the paper comes out, it will be the measurement paper, and the information will be automatically recorded on the sensor of the printer. Need to measure the paper again, it can be used normally.

Fault 3: When printing a large label, only half of it is printed

Analysis: This is because the memory of the label printer is too small. When the label is too large, some information cannot be stored and lost.

Solution: Increase the memory of the label printer.

Common Faults and Solutions of Zebra Printers

Fault four: unclear printing, poor quality

Analysis: There are three possibilities, first, the print head may not be installed correctly; second, the temperature is too low; third, the quality of the label paper and ribbon is poor.

Solution: For one, readjust the position of the print head, paying special attention to the consistency of left and right height; for the second, increase the printing temperature, that is, increase the printing density; for the third, replace better label paper and ribbon.

Fault five: Ribbon wrinkled

Analysis: It may be that the temperature setting of the label printer is not correct, it may be that the ribbon around the machine is not correct, or the media is not set correctly for the amount of paper, it may be that the pressure and balance of the print head are not set correctly

Solution: reinstall the driver, adjust the printing temperature, and adjust the printing pressure.

Fault 6: The vertical direction is missing during the printing process of the barcode printer

Analysis: This may be caused by long-term use of the printer or dust coverage on the surface of the print head

Solution: Clean the print head with alcohol swab first , if it is still abnormal, contact the dealer to replace the print head.

Fault 7: All the indicators of the label printer are flashing, and the paper cannot be measured

Analysis: If this happens, it means that the sensor cannot be recognized or is broken.

Solution: Clean the sensor first to remove the dust on the surface. If it cannot return to normal, you need to contact the dealer to replace the sensor.

Fault 8: LCD does not display and cannot be operated

Analysis: In this case, the motherboard or EPROM is damaged

ZEBRA ZC100 Card Printer Cleaning Card

Posted on January 14, 2022February 11, 2023 by Adminsoft

ZEBRA ZC100 card printer cleaning card

Selling card printers for nearly 10 years, and has accumulated rich after-sales experience and customer feedback cases.

According to our after-sales statistics, users report that 80% of card printing problems can be solved with cleaning cards.

Used for a long time, there may be some residues and dust in daily life inside the machine.

The card feeding channel is a very important part of all the components of the ZC100 card printer, which will directly affect the printing quality.

ZEBRA (Zebra) ZC100 card printing belongs to the equipment category, regular cleaning can keep the printer in a better condition and prolong the life of the printer.

Zebra cleaning card is a special cleaning card for ZC100 card printing. It is a cleaning product composed of ultra-pure solvents, additives and composite materials with strong adsorption capacity.

It can Quickly and safely remove dust, oil and other contaminants from the ZC100 card printer.

Integrity shapes the brand, quality opens up the market. Our company has been committed to providing users with high-quality products and satisfactory services. Yousite specializes in the production of printer consumables . If you have more questions about ZC100 card printer cleaning cards, please contact us.

For the steps of using the cleaning card of ZEBRA ZC100 card printer, please pay attention to our company for more technical news.

Printer Clean Swabs/Cleaning Stick for Card Printer/Thermal Printer

Posted on January 5, 2022December 5, 2022 by Adminsoft

Printer clean swabs/cleaning stick for card printer/thermal printer

Specifications

1. cleaning help for large format printers.
2. cleaning swab stick/Cleaning wipes/non-woven cloth.
3. best price and fast delivery.

IPA isopropyl alcohol: As a chemical solvent in many industries, especially during electronics assembly and repair services.

The most typically made use of chemical solvent is isopropanol (IPA Swab).

It is very easy to liquify various polar and non-polar contaminants. Generally utilized to liquify and also remove light oil, finger prints, cutting liquid, flux deposits, carbon down payments and release representatives. It is also easily miscible with water, so it can additionally be used as a desiccant.

For applications on electronic printed circuit card (PCB) components, we use isopropyl alcohol to clean flux residues from PCB repair work and remodeling. Remove solder paste or sticky substances from SMT mesh. Our Maintenance with Isopropyl Alcohol cleans SMT reflow ovens, wave soldering jaws. Precision soldering tips, trays and any other flux buildup and carbonization that tends to collect during automated soldering.

Compatibility of isopropanol

Isopropyl alcohol swab is generally suitable with the majority of products utilized in digital products.

Printer Clean Swabs/Cleaning Stick for Card Printer/Thermal Printer

When solvents are incompatible with the substrate, they may cause cracking (microcracks), soften the material, or in the case of seals or gaskets, cause them to expand, shrink, or become brittle.

Quality or kind of isopropanol

There are several varieties and also grades of isopropanol, which are generally differentiated according to the amount of water in the remedy and other chemicals or non-volatile materials measured.

Isopropyl alcohol is hydrophilic or miscible with water, so it is simple to get water right into an azeotropic solution. When you see “70% isopropanol” on the tag, it describes the content of isopropanol related to dissolved water – that is, 70% isopropanol plus 30% water.

Water eliminated to create an extra pure isopropanol to develop the so-called “anhydrous” isopropanol.

IPA including 0.2% or 50% water has little impact on the look and smell of the material, however will considerably affect the surface area stress, or its moistening capability and also drying time. The more water containing isopropanol, the higher the surface area tension. This creates the solvent to come to be a lot more dry rather than wet or flaky, which might trigger areas. Cleaning up mirrors, lenses and also other optical tools “water areas” is specifically troublesome.

With the increase of the portion of water in the alcohol service, the drying time rises significantly. Depending upon the application, this can be a benefit or a drawback. For instance, isopropyl alcohol is frequently used as a flux eliminator to remove change residues around solder joints. Operators often tend to select fast drying, to ensure that they can clean up electronic equipment in time as well as recover it to use asap. In order to decay and eliminate thick, sticky or baked products that require even more time to remain or saturate, slowing down the drying out time normally improves the cleansing impact.
ACS/Reagent Grade – Satisfies or surpasses the pureness criteria established by the American Chemical Society (ACS). This quality applies to food, medication or pharmaceutical use and various other applications needing rigorous quality specifications as well as purity exceeding 95%.

USP Quality – Meets or surpasses the needs of the United States Pharmacopoeia (USP).

NF Quality – Satisfies or goes beyond the demands of the National Formulary (NF).

Lab Grade– The grade most commonly utilized for clinical applications, yet the exact impurity web content is unknown.

Purification quality – likewise referred to as “pure” or “useful quality”, which does not meet official requirements as well as is not enough for food, medication or clinical objectives.

The basic term “alcohol for external usage” typically describes isopropyl alcohol, but individuals who wish to acquire a specific quality of alcohol ought to prevent making use of items marked in this way. Outside alcohol does not refer to a certain grade, or perhaps various types of alcohol, such as ethanol

Customer alcohol for external usage may also have various other components, such as additives, seasonings and colorants, which are potential contaminants.

Cleaning up stick/dust-free cloth/non-woven towel for printer equipments.