Home » Printhead Cleaner

Wipes by IPA Percentage Level : Choosing the Right Concentration for Your Cleaning Needs

Posted on September 29, 2024September 29, 2024 by Adminsoft

When selecting wipes based on isopropyl alcohol (IPA) percentage, it’s important to understand how different concentrations serve various cleaning purposes. Here’s a breakdown of common IPA percentage levels in wipes and their typical applications:

1. 70% IPA Wipes

Characteristics: Balanced mixture of IPA and water.
Applications:
- Effective against a wide range of bacteria and viruses.
- Ideal for disinfecting surfaces in cleanrooms, laboratories, and medical environments.
- Suitable for cleaning electronic devices without leaving residue.

2. 50% IPA Wipes

Characteristics: Lower concentration, higher water content.
Applications:
- Less effective as a disinfectant compared to 70% but gentler on sensitive surfaces.
- Good for general cleaning tasks where a milder solvent is needed.
- Suitable for cleaning optical surfaces and delicate electronics.

3. 99% IPA Wipes

IPA alcohol cleaning wipes are the best choice for effective, versatile, and sanitizing cleaning. Whether for electronics, optical instruments, or cleanroom environments, IPA wipes get the job done.

Characteristics: High purity, low water content.
Applications:
- Effective for dissolving oils and greases.
- Suitable for cleaning electronic components that are not sensitive to moisture.
- Often used in applications requiring fast evaporation and minimal residue.

4. Specialty Wipes with Variable IPA Concentrations

Characteristics: Custom blends or specific formulations.
Applications:
- Designed for specific tasks or materials, such as semiconductor manufacturing or pharmaceutical applications.
- May incorporate additives to enhance cleaning efficiency or surface compatibility.

Summary

70% IPA Wipes: Best for disinfecting and general cleaning.
50% IPA Wipes: Gentle for sensitive surfaces.
99% IPA Wipes: Effective for heavy-duty cleaning and fast evaporation.
Specialty Wipes: Tailored for specific industry needs.

When choosing wipes, consider the application, the type of surface being cleaned, and the desired cleaning efficacy.

Must-Have Essential: IPA-M3 Cleaning Wipes for Effortless Stain and Dust Removal

Posted on August 31, 2024August 31, 2024 by Adminsoft

In our fast-paced lives, having a convenient and effective cleaning tool is essential to keeping our belongings spotless. Especially during the hot summer months, sweat, dust, and stains can easily accumulate, affecting the quality of our daily life. This is where IPA-M3 Cleaning Wipes come in as a must-have essential.

1. Powerful Cleaning and Disinfection

IPA-M3 Cleaning Wipes

IPA-M3 Cleaning Wipes are formulated with 99% Isopropyl Alcohol (IPA), making them highly effective at removing dust, fingerprints, and stubborn stains from various surfaces. Whether it’s electronics, office equipment, or everyday items, these wipes ensure everything looks and feels as good as new. Plus, their strong disinfecting properties help keep your environment hygienic.

2. Convenient Anytime, Anywhere

For those working in an office, dust and dirt can accumulate on your desk, computer, keyboard, screen, calculator, and phone screen at any moment. With IPA-M3 Cleaning Wipes, you can always have a quick and easy cleaning solution on hand. Just grab a wipe, give it a quick swipe, and your workspace is clean again. For fashion-conscious individuals, these wipes are even more essential during the summer. Light-colored bags and shoes are more prone to stains, but with IPA-M3 wipes in your bag, you can easily wipe away any marks and keep your accessories looking pristine.

Cleaning Wipes Lint Free

3. Perfect for Summer Challenges

The summer heat makes us sweat more, and our belongings are more likely to attract dust and stains. IPA-M3 Cleaning Wipes are designed to tackle these challenges head-on, allowing you to clean up quickly and efficiently. No need to worry about those tricky stains and dust in the hot summer—these wipes make the job easy.

4. Practical and Versatile

These cleaning wipes aren’t just for electronics—they’re great for a wide range of applications. From office desks to handbags and shoes, their powerful stain-removing capabilities and portable design make them an essential cleaning tool for your home, office, and on the go.

In conclusion, IPA-M3 Cleaning Wipes are more than just a cleaning tool—they’re a lifesaver that makes your daily life easier and more efficient. Whether you’re at home, in the office, or out and about, these wipes ensure you’re always prepared to keep your surroundings clean. Let’s say goodbye to stains and dust and enjoy a clean, fresh summer!

The Secret to Maintaining Your Card Reader’s Optimal Performance: CR80 Cleaning Card

Posted on July 13, 2024July 13, 2024 by Adminsoft

Magnetic card readers are essential components in various industries, playing key roles in ATMs, POS systems, credit card machines, and insert equipment.

However, reader failures and errors are often caused by dirty reader heads due to poor maintenance and contaminants.

To ensure these devices perform at their best and last longer, regular cleaning is crucial. This is where the CR80 cleaning card comes in, providing a simple and effective solution.

What is the CR80 Cleaning Card?

The CR80 cleaning card is a tool consumable specially designed for cleaning and dust removal of card equipment. It has multiple advantages and can clean dirt and pollutants conveniently and quickly, ensuring the stability and reliability of card equipment

The CR80 cleaning card is specifically designed to clean magnetic card readers. It works with insert, swipe, and motorized readers, ensuring the read head and entire magnetic stripe track are thoroughly cleaned in a single pass. By regularly using the CR80 cleaning card, you can significantly reduce reader failures and errors, extending the lifespan of your equipment.

Benefits of the CR80 Cleaning Card

Wide Compatibility: The CR80 cleaning card is suitable for most card readers and card printers, making it a versatile cleaning tool.
Efficient Cleaning: It effectively removes dust, dirt, and other contaminants from the read head and magnetic stripe track in one go, ensuring optimal performance.
Easy to Use: No special skills are required. Simply use the cleaning card like a regular magnetic card, and the cleaning process is complete.
Prolongs Equipment Life: Regular cleaning with the CR80 card reduces wear and tear on the read head, decreasing the frequency of failures and extending the life of your device.

Applications of Magnetic Card Readers

Magnetic card readers are widely used in various sectors, including:

Banking and Finance: ATMs and credit card readers
Retail and Hospitality: POS systems and membership card readers
Transportation: Metro and bus card readers
Security and Access Control: Door access and employee card readers

Magstripe Reader Cleaning Cards are designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions and other contaminants from hidden magnetic, photo and optical sensors of all types.

In any industry, the performance and reliability of card readers are crucial. Using the CR80 cleaning card ensures your equipment is always in top working condition, enhancing customer experience and maintaining smooth operations.

How to Use the CR80 Cleaning Card?

Using the CR80 cleaning card is simple. Follow these steps:

Remove the CR80 cleaning card from its packaging.
Insert, swipe, or run the cleaning card through your reader, depending on your device’s operation.
Repeat the cleaning process a few times to ensure thorough cleaning.
Dispose of the cleaning card after use.

Regular use of the CR80 cleaning card ensures your magnetic card readers perform optimally, reducing failures and errors, and increasing efficiency.

Conclusion

Magnetic card readers are indispensable in today’s world, and their performance and reliability directly impact business operations. The CR80 cleaning card offers a simple, effective cleaning solution to keep your readers in peak condition. Whether in banking, retail, transportation, or security, regular use of the CR80 cleaning card is a smart choice for maintaining long-term device stability. Start using the CR80 cleaning card today and make it your go-to tool for card reader maintenance!

Video: How to clean Evolis Edikio Access printer?

Posted on February 9, 2024April 11, 2024 by Adminsoft

To clean the Edikio Access printer, follow these steps:

By following these steps, you can effectively clean your Edikio Access printer, ensuring optimal performance and print quality for your card printing needs.

What you’ll need:

Evolis Edikio Printer Cleaning Kit, including:
- “T” shaped cleaning card
- Soak lPA sponge swab
- Cleaning pen
- Squeeze sponge swab
- Soak lPA wipes

Watch the video for step-by-step instructions:

1. **Open the Printer Cover:** Open the cover of the printer to access the internal components.

2. **Remove the Ribbon:** Take out the ribbon from the printer to prevent interference during the cleaning process.

3. **Close the Cover:** Close the printer cover securely and ensure it clicks into place.

4. **Remove Cards from the Feeder:** Check and remove any cards present in the feeder to avoid obstruction during cleaning. 5. **Activate Cleaning Mode:** Double-click the control button on the printer to activate the cleaning mode before proceeding further.

6. **Insert Cleaning Card:** Insert the “T” shaped cleaning card into the feeder as per the printer’s instructions. Allow the card to pass through the printer.

7. **Remove Cleaning Card:** Once the cleaning process is complete, remove the “T” shaped card from the feeder.

8. **Use Cleaning Tools for Print Head:** – Utilize a cleaning pen to remove debris and buildup from the print head, improving print quality and prolonging its lifespan. – Alternatively, use a squeeze sponge or sponge-tipped swab to clean the print head, especially in hard-to-reach areas. – For deeper cleaning, employ cleaning wipes to clean both internal and external surfaces, including contaminated components and feeder rollers.

9. **Printer Cleaning from Edikio Print Center:

** Additionally, printer cleaning can be performed using the Edikio Print Center software. Navigate to the printer properties, access the “cleaning” section, or utilize the “Tools” menu and select “Printer Cleaning Wizard” for automated cleaning procedures.

Application Range of Card Printers

Posted on February 11, 2023February 11, 2023 by Adminsoft

Specifications for the use of card printers

In daily life, there will always be small problems of this kind in electronic equipment, and the card printer is no exception. If we can pay attention to some small details of protection during the cleaning process of using the card printer to make the application more standard and effective. then It can also prolong the service life of our card printer and maintain it better. Here are some application standards of card printers and some tips during use!

Card printer specification:

1) In any case, prevent dust, dirt, food, liquid, etc. from entering the printer.

2) Do not open the top cover in most cases unless the ribbon is replaced.

3) Store consumables (ribbons, cards, etc.) in their packaging until ready to use.

4) Do not use contaminated consumables.

5) Store all consumables in a clean, cool, dry place.

6) Please put the paper and non-material into the printer in a hurry.

7) Do not block the power fan or exhaust hole at the rear of the printer.

8) Place the printer on a stable platform, not on the floor.

9) When placing the printer, keep it away from the exhaust vent (heating pipe, bellows port).

10) Do not use the printer to do things outside its scope of application.

11) When cleaning around the printer, close the cover to prevent debris from entering the printer.

12) Place the printer in a clean office environment and protect it from collisions.

Precautions for using the card machine:

1) Please turn off the power before plugging and unplugging the printing cable of the card printer, so as not to burn the data transmission port of the printer and the printing port of the computer;

2) Be careful not to hit the print head with hard objects when changing the ribbon or cleaning the printer, because the surface of the print head is hard and brittle and easy to be damaged;

3) Do not scrub the card printer with corrosive substances (such as Thinner), and do not use alcohol to clean the card wheel and print head of the printer for a long time;

4) If there are small spots on the printed card, pay attention to clean the card surface or the cleaning wheel inside the machine;

5) If the card printer stops moving for a long time during the printing process, click the computer screen with the mouse;

6) After using the card printer every day, turn off the power of the external power supply to ensure that the power supply is well grounded. If possible, use UPS to ensure the stability of the power supply.

7) The card printer must be cleaned once after printing a thousand copies with a color ribbon, and it needs to be cleaned when using a black ribbon (it is recommended to clean the printer every time the ribbon is replaced).

8) During the cleaning work, it is necessary to use professional cleaning cards for cleaning work, instead of using alternative or white cards for cleaning work. Otherwise, the cleaning work will seriously affect the print head.

The cleaning card can only be used once. It is also necessary to use a special cleaning swab / cleaning pen when cleaning the print head .

How Do You Clean Printer Labels?

Posted on January 28, 2023January 28, 2023 by Adminsoft

When you use a barcode printer, you often encounter some problems. Come and see if you have encountered the same problem, let us solve it together?

1. Ribbon deviation during printing: the main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor cutting quality of the ribbon.

2. The printing is not clear and the quality is poor: there may be the following reasons: (1. The temperature of the print head is too low or the print density is too light; 2. The print head is not installed correctly; 3. The print head needs to be cleaned)

3. There is always a shallow thin line on the label printed by the printer: If your printer has such a problem, it proves that you have not done enough to maintain the printer.

When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.

If the printer punches a card and a large area of the card is not printed, there are two possibilities:

1. The print head is seriously damaged.

2. The data cable of the print head is damaged. (The damage of the print head is irreparable. In this case, only a new print head should be replaced.)

The way to avoid this situation is to:

1. Pay attention to cleaning the printer regularly.

2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions).

3. Be careful not to touch the print head when opening or closing the case cover.

4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).

4. Occasionally, some spots will appear on the label printed by the printer: 1. If there are some spots on the card you printed out, it is because there is dust in your printer, which needs to be cleaned in time.

It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage. 2. If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head. 3. The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (each card should be wiped with an eye cloth before printing), so that the printed card will not be flawed.

5. How to solve the problem of ribbon wrinkling

Reasons: 1. The carbon ribbon is not correctly wrapped around the machine; 2. The temperature setting is not correct; 3. The pressure and balance setting of the print head is not correct; 4. The media is not correctly set to feed the paper.

Solutions: 1. Reinstall the medium correctly; 2. Adjust the printing temperature to meet the printing requirements as much as possible; 3. Reset the lower pressure required for printing; 4. Reset the correct paper feeding amount of the medium.

If you have other questions, you can log in to our official website and get in touch with us: barcode printer

Clean the barcode printer regularly to ensure the printing quality:

1. When doing other things to expose the print head, remove rings, watches, long necklaces, status cards and any metal objects that touch the print head. Do not turn off the power of the printer when it is exposed near the print head, but to ensure stability. We recommend that you turn off the power. If the power is turned off, the user will lose temporary settings such as label formats and must reload these settings before resuming printing.
2. Only the designated cleaning agent should be used.

Steps to clean the barcode printer card:

1. Turn the power switch to the “ON ( | )” position, then press and hold the multi-function button for 5 seconds.
2. At the beginning of cleaning, the message REMOVE RIBBON THEN CLOSE LID will appear on the LCD.
3. After the ribbon is taken out and the cover is closed, the message EMPTY FEEDER THEN CLOSE COVER will be displayed.
4. If the lid is opened without removing the ribbon and then closed, the REMOVERIBBON THEN CLOSE LID message will continue to be displayed.
5. After removing the ribbon and closing the cover, the firmware will eject the unique card in the printer. The audio EJECTING CARD will be displayed.
6. The LCD will then show FEED LONG CLEANING CARD . In response to a cleaning card, the rollers feed the card into the printer.
7. When the card ejection sensor no longer detects the long cleaning card, the message INSERT FEEDER CLEANING CARD will be displayed. Open the feeder cover and insert the feeder cleaning card.

Card And Smart Card Reader Cleaning Cards

Posted on January 12, 2023May 5, 2023 by Adminsoft

Card And Smart Card Reader Cleaning Cards

Product Name: Printer Head Cleaning Card for ATM/Card reader/Printer

These double sided pre-saturated Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides and other contaminants that build up on magnetic and optic reader heads.

Cleaning Cards for Magnetic Stripe Credit Card Readers

Card readers require preventive maintenance to keep the heads clean and debris not build up from contamination. Presaturated cleaning cards are a cost-effective way to maintain readers and extend head life.

They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.

·Presaturated magnetic head cleaning cards.
·Presaturated cards instantly clean heads on point-of-sale credit card readers, access control/ID card readers and all open systems.
·Just swipe to clean.
·The individually packed cards are non-abrasive and incredibly easy to use.

What are features of Cleaning Card?

Card Dimensions (L x W)	2 1/8 “ x 3 3/8”
Card Thickness	0.028” (+ 0.002 / – 0.001)
Card Construction	Polyester / PVC/ Cellulose
Saturation	99% Isopropyl AlcoholUV test card
Saturation Volume	3 ML (+/- 0.5 ML)
Inner Pack	25 Saturated cards/50 Saturated cards
MInner Pack Weight	0.68 lbs UV test card
Inner Pack Dimensions	H: 3 11/32” W: 5 ¼” D: 2 3/8”
Inner Pack Construction	Standard Clay Coated Chipboard Box
MOQ	200pcs
Standard Packing	25 pcs per box ,100 boxes per case, or 50 pcs per box, 50 boxes per case

What is Cleaning Card application?

1. All Card Readers

2. ATM/POS Terminals

3. Petroleum Pump

4. Time/Badge

5. Slot/Vending

6. Optical/Barcode

7. Smart Card

8. Thermal Printers

Best Way To Clean Credit Card Reader

Posted on December 10, 2022May 5, 2023 by Adminsoft

When the card printer LCD screen displays “CLEAN PRINTER” or the printed image is not clear or complete. It is necessary to use a special cleaning card to clean the printer. In addition, during the printing process, when the sensor is dirty and the card is frequently stuck in the flipper and the “Mechanical” mechanical error is reported, it is also necessary to use a special cleaning card to clean it.

How to clean your credit card machine: tips and steps to follow.

The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer. So please try not to place the printer in a workplace with too much dust or strong sunlight.

Regular cleaning of the printer will keep the printer in top condition, produce better quality results and avoid breakdowns.
Before cleaning the printer, please clean the dust around the inside of the printer. (The surrounding dust may be rotated during printing, floating in the machine, and adsorbed on the print head due to static electricity, causing the print head to break the needle ) Cleaning wipes . Then use the cleaning card to clean the card reader ribbon.
Recommended to use cleaning cards to clean all shafts in the machine. Replace the cleaning roller after each roll of ribbon. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings .
Cleaning of any printer consists of three parts. The cleaning rollers cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine. Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong the service life of the print head. It is recommended to purchase related cleaning kits .

Before cleaning the printer, please use a cleaning swab to clean the dust inside and around the printer. (The dust floating inside the printer may generate static electricity during the printer’s working process. The dust is easy to attach to the print head and cause the print head to break the needle.) And then clean it with a cleaning kit.
Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card. And the cleaning effect cannot be achieved.

Be careful not to damage the print head when opening or closing the cover.

Do not carry hard objects such as watches and rings when inspecting the machine. It is easy to touch the print head and damage the print head.

How To Clean A Chip Card Reader

Posted on December 10, 2022May 5, 2023 by Adminsoft

How to clean a chip card reader?

What are the precautions for the use of IC card readers 1. Plug-in card holder

1. For the plug-in card holder, care should be taken to prevent the card from being inserted too hard. Too much force will damage the in-position switch of the card holder, and it will also damage the card to a certain extent.

2. Pay attention to keep the card clean. If the chip of the card is not clean, not only the card will not work normally, but also the contact point of the card holder will be polluted.

3. It is very important to operate after the card is in place. If the reader powers on the card under unstable conditions, it may cause damage to the card.

4. After the operation of the card in the plug-in card holder is completed, the application program should first send a command to the reader to power off the card, and then pull out the card after power off. Pulling out the card without power off may cause damage to the card.

2. Push-push deck

1. The push-push card holder adopts the push-in card, and the card will pop out when the card is pushed in again when it is taken out. This structure reduces the friction between the card and the electric shock, and has certain advantages in protecting the card. But it can also damage the card if not used correctly.

2. The most common error is that when taking out the card, instead of pushing it in again to make the card pop up automatically, and directly pulling the card out, this situation will seriously damage the card and the card holder.

3. Pay attention to keep the card clean. The card holder of any structure will eventually be in close contact with the chip of the card, so if the chip of the card is not clean, it will pollute the contacts of any kind of card holder.

3. The environment and method of using the IC card

Proper storage and correct use of cardholders are the most economical and effective means to prolong the service life and reliability of IC cards. Proper storage, no random bending, no random contact with the contacts, no random access to strong static electricity environment, pay attention to keep the card surface clean, etc., will help to improve the reliability of the IC card and prolong its service life.

4. Use of cleaning card

The cleaning card is a cleaning measure used after the reader has been used for a period of time and the contacts of the deck are polluted. The method of using the cleaning card is: insert the cleaning card into the reader-writer when the power is cut off, and then clean the electric contact of the deck after inserting it back and forth.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

The cleaning card is made of polyester, polyethylene, polypropylene or hard paper.

The base material of the CR80 cleaning card is PVC, and the two sides are laminated with wood pulp polyester spunlace cloth, which is soaked in IPA solution.

Inserted into the card machine, and inserted and pulled out several times to clean the card. It is very convenient to clean the contact surface of the machine, and the effect is obvious, which can effectively ensure the long-term normal operation of the card machine.

How to Clean a Card Reader?

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

1
1. The IC card reader should be placed on a fixed platform, away from strong magnetic fields. The working environment should be kept tidy, and the surface of the machine should be kept clean.
2
2. Do not allow foreign matter to enter the IC card reader from the cardholder entrance. Including water, oil, etc.
3
3. Regularly clean the deck to keep reading and writing correct. Method: Dip the “cleaning card” with a little alcohol, insert it into the card holder, move back and forth, left and right for several times, then pull it out, wait for a few minutes and then use it.
4
4. If the IC card reader is faulty, please hand it over to the maintenance personnel.
5
5. If it needs to be transported, please use the original packaging to avoid severe impact.

Precautions

To prolong the life of the IC card reader, you must maintain the IC card reader.

IC card (Integrated Circuit Card,), also known as smart card, smart card (Intelligent card), microcircuit card or microchip card, etc.

Where is The Cleaning Card Manufacturer?

Posted on December 9, 2022December 9, 2022 by Adminsoft

Where is the cleaning card manufacturer? Which is the better quality

Where are the manufacturers of cleaning card products? Which one is better in quality! Clean Kachina brand – Yousite! Yousite company specializes in the production of cleaning cards , dust-free cotton swabs, cleanroom cotton swabs, etc., with reliable quality, selling well all over the country, and being praised by new and old customers! Welcome new and old customers to consult and purchase: beck@yaostbio.com .

1. In terms of product quantity

The number of cleaning card products must be effectively increased and expanded, not only to meet the growing needs of domestic printer manufacturers, but also to adapt to the latest developments in foreign printer production, actively expand exports, and actively provide foreign printer companies with what they need. Printer cleaning card products required.

2. In terms of product quality

Keep your Fargo ID card printer running smoothly with this 86177 Cleaning Kit with 3 long cleaning cards, 10 adhesive cleaning cards, and 4 cleaning swabs.

In terms of product quality, we must also strive for excellence. To manufacture advanced and high-quality products, the quality must be stable and reliable, not only to meet the precise requirements of the process, but also to ensure the processing quality of the printer. Rod head goes one step further to improve product quality and cleaning effect.

3. In terms of product categories

The types of cleaning card products must also be continuously increased, not only horizontally, but also vertically, to increase the breadth and depth of products, to continuously expand and extend on the original basis, and more importantly, to check for deficiencies and fill in gaps, and strive to be complete. .