How to Clean a Card Reader with a Cleaning Card

How to Clean a Card Reader with a Cleaning Card : A Step-by-Step Guide

Cleaning a card reader with a cleaning card is a straight forward process that helps ensure optimal performance and longevity of the device. Here’s a step-by-step guide to effectively clean your card reader:

Thermal Printer Cleaning Cards IPA

What You’ll Need

  • Cleaning Card: Make sure it’s specifically designed for your type of card reader (e.g., magnetic stripe, chip reader).
  • Isopropyl Alcohol (optional): For additional cleaning power if needed.
  • Microfiber Cloth (optional): For any external cleaning.

Steps to Clean the Card Reader

  1. Turn Off the Card Reader: Before cleaning, ensure the device is powered off to prevent any electrical issues.
  2. Remove Any Cards: Take out any cards that might be in the reader to avoid damaging them during the cleaning process.
  3. Inspect the Card Reader: Look for any visible dust, debris, or smudges on the reader. This will help you identify areas that need extra attention.
  4. Prepare the Cleaning Card: If your cleaning card is pre-soaked, you can use it directly. If it’s dry, you can lightly moisten it with isopropyl alcohol for better cleaning, but avoid soaking it.
  5. Insert the Cleaning Card: Gently insert the cleaning card into the card reader as you would with a normal card. Make sure to follow any directional arrows or instructions provided by the manufacturer.
  6. Pull the Card Through: Slowly pull the cleaning card through the reader. This will help dislodge any dirt, dust, or debris inside. If the reader has a specific cleaning cycle, follow those instructions.
  7. Repeat if Necessary: Depending on the level of dirt, you may want to repeat the process with another cleaning card. For heavily used devices, regular cleaning is recommended.
  8. Clean the Exterior: Use a microfiber cloth to wipe down the exterior of the card reader, removing any fingerprints or surface grime.
  9. Allow to Dry: Let the card reader air dry completely before powering it back on.
  10. Test the Reader: After cleaning, test the card reader with a card to ensure it’s functioning correctly.

Maintenance Tips

About ATM/POS Terminals Cleaning cards

ATM/POS terminals devices process and handle sensitive information, making it critical to ensure they are properly maintained and functioning at their best .

  • Regular Cleaning: Clean your card reader regularly, especially in high-usage environments, to prevent buildup and ensure optimal performance.
  • Store Properly: Keep the reader covered when not in use to minimize dust accumulation.
  • Use Quality Products: Always use cleaning cards and solutions that are compatible with your card reader to avoid damage.

By following these steps, you can maintain a clean and efficient card reader, ensuring reliable performance for all your transactions!

Lint-Free Foam Cleaning Swabs for Print Heads

Lint-Free Foam Cleaning Swabs for Print Heads : The Ultimate Solution for Maintaining Print Quality

The Essential Role of Lint-Free Foam Cleaning Swabs for Print Head Maintenance

In the world of printing, maintaining the quality of output is paramount. One of the key factors affecting print quality is the cleanliness of the print heads. Over time, ink residue, dust, and debris can accumulate, leading to smudged prints, streaks, and even mechanical issues. To combat this, lint-free foam cleaning swabs have emerged as an essential tool for professionals in the printing industry.

What Are Lint-Free Foam Cleaning Swabs?

IPA Clean Swab Squeeze vs. Soak

IPA squeeze cleaning swabs are suitable for precision cleaning scenarios that require precise control of the amount of IPA solution, while IPA soaked cleaning swabs are more suitable for daily tasks that require quick cleaning.

For precise cleaning tasks, particularly in sensitive applications like print head maintenance. Constructed from high-quality open-cell polyurethane foam, these swabs are engineered to absorb excess ink and remove contaminants without leaving behind any fibers or lint.

Key Features of Lint-Free Polyurethane Foam Swabs

  1. Lint-Free Material: The primary advantage of these swabs is their lint-free nature. Unlike cotton swabs, which can leave behind fibers, foam swabs ensure a clean surface, making them ideal for delicate components like print heads.
  2. High Absorbency: The open-cell structure of the foam allows it to hold significant amounts of liquid, making it perfect for applying cleaning solutions or soaking up excess ink. This ensures effective cleaning without the risk of oversaturation.
  3. Durable Design: Many lint-free foam cleanroom swabs feature sturdy handles that provide users with a firm grip, allowing for precise maneuvering. This is especially beneficial when working with intricate print head components.
  4. Chemical Compatibility: These swabs are often compatible with a variety of cleaning solutions, including isopropyl alcohol and specialized print head cleaners, enhancing their versatility.

Benefits of Using Lint-Free Foam Cleaning Swabs for Print Heads

99.9% IPA Swab Foam Tip Electronic Cleaning Swab

The plastic handle on the swab is filled with a 99.9% IPA solution. – Just squeeze or break the plastic handle and the foam head will fill with ipa.

 

    • Effective Cleaning: Reach and clean tight spaces thoroughly without damaging surfaces.
    • Less Contamination: The lint-free design minimizes the risk of introducing particles that could interfere with operations.
    • Cost-Effective: Tailoring swabs to specific needs helps reduce waste and improve efficiency.
    • Versatile Uses: Suitable for multiple industries, from printing to electronics and laboratories.

How to Use Lint-Free Foam Cleaning Swabs

  1. Preparation: Before cleaning, ensure that the printer is turned off and unplugged. Gather your cleaning solution and lint-free foam swabs.
  2. Application: Dampen the foam swab with the appropriate cleaning solution, ensuring it is moist but not overly saturated to prevent dripping.
  3. Cleaning: Gently wipe the print head and surrounding areas with the foam swab. Use light pressure to avoid damaging delicate components. Repeat as necessary with a clean swab until the area is free of contaminants.
  4. Inspection: After cleaning, inspect the print head and surrounding areas for any remaining residue or debris.
  5. Disposal: Dispose of used swabs properly, following your facility’s waste management guidelines.

thermal printer cleaning swab

Foam Tipped Applicator are an indispensable tool for maintaining the cleanliness and performance of print heads in various printing applications. Their unique features make them ideal for a variety of tasks, from print head maintenance to cleaning sensitive electronics. Investing in these tailored swabs enhances cleaning efficiency and helps maintain high cleanliness standards across different industries.

Custom Lint Free Polyurethane Foam Swabs

We’re professional lint free foam cleaning swabs manufacturers and suppliers in China, specialized in providing high quality custom made products.

Thermal Printer Cleaning SHOP

Understanding the Various Types of ID Card Printer Cleaning Kits

ID card printers are essential for businesses and organizations that need to produce high-quality identification cards. To maintain their efficiency and prolong their lifespan, regular cleaning is crucial. In this post, we’ll explore the different types of ID card printer cleaning kits, ensuring you can keep your printer in optimal condition.

Why Cleaning Your ID Card Printer Matters

Regular cleaning prevents dust and debris from affecting the printer’s performance, ensuring clear and professional prints. It also helps avoid costly repairs and replacements by keeping the internal components in good working order.

Types of ID Card Printer Cleaning Kits

  1. Cleaning Cards
CR80 Adhesive Cards vs. CR80 IPA Cleaning Cards

CR80 Adhesive Cards vs. CR80 IPA Cleaning Cards

    • IPA Cleaning Card
      IPA (Isopropyl Alcohol) cleaning cards are widely used to clean the internal parts of ID card printers. Pre-saturated with isopropyl alcohol, these cards effectively remove dirt, debris, and ink residue from the printer’s transport rollers and other mechanisms. Regular use of IPA cleaning cards ensures smooth card transport and optimal print quality.
    • Adhesive Cleaning Card
      Adhesive cleaning cards trap dust and dirt from the printer rollers using a sticky surface. These cards are perfect for catching tiny particles that could degrade print quality over time. They are an ideal choice for environments prone to dust. Learn more
  1. Cleaning Swabs
    Cleaning swabs are designed for reaching the small, intricate parts of the printer that cleaning cards cannot access. Often used to clean the printhead and other delicate components, these swabs are usually pre-saturated with a cleaning solution for convenience.
  2. Cleaning Pens
    Specifically designed to clean the printhead, these pens have tips saturated with a solution that dissolves built-up residue, ensuring high-quality prints.The Difference Between Cleaning Pens and Cleaning Swabs & How to Choose
  3. Cleaning Rollers
    Cleaning rollers help remove dust and debris from the printer’s rollers. Typically sticky or adhesive-based, they capture dirt as they pass through the printer. Regular use can significantly reduce the risk of jams and misprints.
Adhesive Cleaning Roller Kits

Roll Handle Sticky Roller Sticky Dust Paper Tearable Adhesive Brush Clothes Sweater Lint Brush Hair Remover Kit.

How Often Should You Clean Your ID Card Printer?

The frequency of cleaning depends on your printer’s usage. For heavy use, a weekly cleaning schedule is advisable, while lighter use may only require monthly maintenance. Always refer to the manufacturer’s guidelines for specific recommendations.

Choosing the Right Cleaning Kit

When selecting a cleaning kit, consider the specific needs of your printer model. Some kits are tailored for certain brands or models, ensuring compatibility and effectiveness. Investing in a high-quality kit can save time and money in the long run.

Keep Your Thermal Printer in Top Condition

Keep Your Thermal Printer in Top Condition: The Importance of Professional Cleaning Tools

The importance of properly maintaining thermal printers, especially given their widespread use. Thermal printer heads are delicate and require regular cleaning to ensure optimal performance. Using the right cleaning tools is essential for preventing damage and extending the lifespan of the printer.

Why Professional Cleaning Tools Are Necessary

When cleaning a thermal printer’s print head, using a specialized cleaning tool like a clean pen is crucial. Here’s why:

  1. Preventing Damage:
    • Cotton Balls: While it might seem convenient to use cotton balls dipped in alcohol, this method can actually do more harm than good. Cotton balls tend to leave behind fibers that can stick to the print head, leading to clogs, uneven printing, and even damage over time.
    • Alcohol: If not used correctly or in the wrong concentration, alcohol can evaporate too quickly, leaving residue that can affect print quality.
  2. Effective Cleaning:
    • Cleaning Pens: These are specifically designed for thermal printers. They use a special solution and a non-abrasive tip that effectively removes dust, ink residue, and other contaminants without leaving debris behind. This ensures that the print head remains clean and the printer continues to function efficiently.
  3. Long-Term Maintenance:
    • Longevity: Regular cleaning with the right tools can significantly extend the life of the thermal printer. It helps maintain print quality and reduces the need for costly repairs or replacements.

The Risks of Improper Cleaning


Using improper cleaning tools or methods can lead to several issues:

  • Debris Build-Up: As mentioned, cotton fibers or other residues from non-professional tools can accumulate on the print head, causing more significant problems over time.
  • Print Quality Degradation: Residues can affect the thermal transfer process, leading to faded prints, streaks, or incomplete images.
  • Costly Repairs: In the worst-case scenario, improper cleaning can damage the print head, requiring expensive repairs or replacements.

To ensure your thermal printer continues to operate at its best, always use a professional cleaning tool like a cleaning pen. This simple step can prevent a host of problems and keep your printer running smoothly for years to come.

Elevate Your Printing Experience with the Yousite Evolis Printer Cleaning Kit

Elevate Your Printing Experience with the Yousite Evolis Printer Cleaning Kit

In today’s fast-paced world, where efficiency and quality are paramount, maintaining your printing equipment is essential. Introducing the Yousite Evolis Printer Cleaning Kit – the ultimate solution for ensuring optimal performance and longevity of your Evolis printer.

Unparalleled Cleaning Precision

Yousite Evolis Printer Cleaning Kit

Our cleaning kit is meticulously designed to provide unparalleled cleaning precision for every component of your Evolis printer.

Whether it’s the printhead, cleaning rollers, transport rollers, laminator. Or any other part, we have the right tools for the job.

  • Printhead: Utilize our specially crafted swabs and pens to delicately clean the printhead, ensuring crisp and clear prints every time.
  • Cleaning Rollers: Our pre-saturated cards and adhesive cards effortlessly remove dust and debris from the cleaning rollers, preventing misfeeds and jams.
  • Transport Rollers: Keep your printer’s transport rollers in top condition with our pre-saturated cards and T cards, ensuring smooth paper feeding and reliable operation.
  • Laminator: The adhesive cards in our kit are perfect for maintaining the laminator, ensuring consistent lamination quality and durability.
  • Printer: Our wipes provide a convenient solution for cleaning the exterior of the printer, keeping it looking professional and well-maintained.
Evolis ACL006 Adhesive Cleaning Card

Evolis ACL006 Adhesive Cleaning Card

Maximum Efficiency, Minimum Downtime

Regular maintenance with the Yousite Evolis Printer Cleaning Kit not only prolongs the life of your printer but also minimizes downtime. By preventing common issues such as printhead clogs, roller misfeeds, and poor print quality, you can keep your printing operations running smoothly and efficiently.

Tailored Solutions for Your Needs

At Yousite, we understand that every business is unique. That’s why we offer support for custom production, OEM collaborations, and product development with our customers. Whether you have specific requirements or preferences, we are dedicated to working closely with you to develop the perfect solution for your printing needs.

Invest in Quality, Invest in Your Business

Your printer is an investment in your business’s success. Ensure that investment pays off by investing in the Yousite Evolis Printer Cleaning Kit. With optimum cleaning results and superior performance, our kit empowers you to deliver exceptional print quality and reliability, ultimately elevating your printing experience.

Unlock the full potential of your Evolis printer and take your printing capabilities to new heights.

99.9% IPA Swab Foam Tip Electronic Cleaning Swab

Clever Thermal Printer Maintenance: A Step-by-Step Guide Using Cleaning Swabs

Cleaning a thermal printer with a cleaning swab is a crucial maintenance task to ensure proper functionality and print quality. Here’s a step-by-step guide on how to cleverly clean a thermal printer using a cleaning swab:

Materials Needed:

thermal printer cleaning swab

  1. Cleaning Swabs (Pre-saturated or Self-saturated): Ensure they are soaked in alcohol for effective cleaning.
  2. Lint-free Cloth: For additional wiping and drying if necessary. Printer Cleaning Wipes

Procedure:

  1. Power Off the Printer:
    • Before starting any cleaning process, make sure to turn off the thermal printer to ensure safety.
  2. Remove Printer Paper:
    • Take out the thermal paper roll to prevent accidental tearing or damage during the cleaning process.
  3. Access the Print Head:
    • Locate the print head. In most thermal printers, it’s the component that comes into direct contact with the thermal paper.
  4. Use the Cleaning Swab:
    • Take a pre-saturated cleaning swab or a self-saturated cleaning swab.
    • Gently and carefully wipe the print head with the swab. Move the swab left and right until there are no visible stains.
    • Be thorough but gentle to avoid damaging the print head.
  5. Repeat if Necessary:
    • If the IPA Swab comes away dirty, repeat the cleaning process until the swab remains clean after wiping.
  6. Use Lint-free Cloth (Optional):
    • If needed, use a lint-free cloth to wipe the print head gently. Ensure the cloth is clean and won’t leave fibers behind.
  7. Allow Time to Dry:
    • Give the print head some time to air dry before turning the printer back on.
  8. Power On and Test:
    • Once the print head is dry, power on the printer and perform a test print to ensure the print quality has improved.
The Importance of IPA Cleaning Swabs in Cleanroom Environments

The outer layer of micro-denier material in IPA swabs serves as a crucial barrier against cross-contamination. It effectively traps contaminants, preventing them from spreading to other surfaces during the cleaning process.

Tips and Warnings:

  • Avoid Hard Objects: Never use hard objects or abrasive materials to clean the print head, as it may damage the sensitive components.
  • Use Alcohol-based Swabs: Alcohol-based swabs are effective in removing ink and dust. Ensure the swabs are not overly wet to prevent any liquid from seeping into the printer.
  • Regular Maintenance: Consider incorporating regular cleaning into your printer maintenance routine to prevent buildup and ensure consistent print quality.

By following these steps and using the recommended materials, you can maintain the optimal performance of your thermal printer and extend its lifespan.

Optimizing Thermal Printer Performance: A Comprehensive Guide to Printhead Maintenance

Optimizing Thermal Printer Performance: A Comprehensive Guide to Printhead Maintenance

Thermal printers play a crucial role in various industries, from retail and logistics to healthcare and beyond. Over time, the performance of thermal printers can be compromised due to toner residue on the printhead, leading to suboptimal print quality. In this comprehensive guide, we will delve deeper into the importance of printhead maintenance and explore additional tips for optimizing thermal printer performance.

Section 1: Understanding the Impact of Toner Residue

Maintain Exceptional Print Quality with the Miracle of Thermal Printer Cleaning Pens

Keep your thermal printer in peak condition with our user-friendly Thermal Printer Cleaning Pen, designed to effortlessly remove debris, extend print head lifespan, and optimize overall printing efficiency.

Thermal printers utilize heat to produce images on paper, and toner residue buildup on the printhead is a common issue. This residue can result in poor print quality, including faded prints, streaks, or even complete printing failures. To address this issue effectively, regular maintenance is essential.

Section 2: Choosing the Right Printhead Cleaning Tools

While the Yousite Printhead Cleaning Pen is a popular choice, it’s crucial to use cleaning tools specifically designed for your printer model. Always refer to the manufacturer’s recommendations for compatible cleaning products to avoid potential damage. In addition to cleaning pens, lint-free cloths and specialized cleaning solutions can also be effective.

Section 3: Best Practices for Printhead Maintenance

Frequency of Cleaning:
Regular cleaning is key to preventing toner residue buildup. Depending on your printer usage, aim to clean the printhead at least once a month. High-volume printing environments may require more frequent cleaning.

Power Off Before Cleaning:
Always disconnect the power supply before cleaning the printhead. This ensures safety and prevents any electrical issues during the cleaning process.

Thorough Cleaning Technique:
When using a cleaning pen, ensure the pen tip makes direct contact with the printhead. Employ a gentle back-and-forth motion to effectively remove residue. Check for any remaining debris and repeat the process if necessary.

Ventilation:
Perform printhead cleaning in a well-ventilated area to allow the cleaning solution to evaporate quickly. The volatile nature of solutions like IPA in cleaning pens ensures that there is no residue left on the printhead.

Section 4: Routine Printer Maintenance

How To Clean A Barcode Printer

Our thermal printer cleaning pen is designed to quickly remove paper flash, dust, dirt, adhesive residue, and other contaminants from print head

In addition to printhead cleaning, routine printer maintenance is essential for overall performance. This includes checking for firmware updates, inspecting paper paths for debris, and monitoring the general condition of printer components.

Section 5: Troubleshooting Print Quality Issues

If print quality issues persist after printhead cleaning, consider other factors such as the quality of the thermal paper, proper storage of paper rolls, and the overall condition of the printer. Consult the printer manual or manufacturer’s support for specific troubleshooting steps.

Regular maintenance of the printhead is fundamental to ensuring the longevity and optimal performance of thermal printers. By following best practices, using the right cleaning tools, and incorporating routine maintenance into your printer care regimen, you can significantly enhance print quality and reduce the risk of downtime. Invest time in maintaining your thermal printer, and you’ll enjoy consistent, high-quality prints for years to come.

How To Clean A Barcode Printer

How To Clean A Barcode Printer?

We often use barcode printers in our office life, but we often ignore the maintenance of the printer. In fact, doing a good job of cleaning will greatly improve your work efficiency. Let’s take a look at how to clean it!

1. Cleaning of the print head

 To clean the print head regularly and regularly, cleaning kits can use cleaning swab and alcohol. Turn off the power of the barcode printer, keep the same direction when wiping (to avoid dirt residue when wiping back and forth), turn up the print head, remove the ribbon and label paper, and use a cleaning swab soaked in print head cleaning solution (or cleaning wipes ) ), wipe the print head lightly until it is clean, and then gently dry the print head with a clean cotton swab. Keeping the barcode print head clean can get good printing effect, and the most important thing is to prolong the life of the print head.

Printhead Wipes & Cleaning Swabs for Printers

Printhead Wipes & Cleaning Swabs for Printers

Use a cleaning swab or a swab dampened with isopropyl alcohol to wipe the print element from top to bottom. Also rotate the rollers and clean the platen thoroughly with a cleaning swab. You can use cleaning cards and cleaning pens instead of cleaning swabs, which can better remove stubborn dirt.

Printhead Cleaning Pen with Chisel for Quickly Removing Contaminants from Thermal Printers Including Label Printe.

Printhead Cleaning Pen with Chisel for Quickly Removing Contaminants from Thermal Printers Including Label Printe.

2. Cleaning of the sensor

  The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The sensor includes a ribbon sensor and a label sensor. See the instruction manual for its location. The cleaning method is to wipe the sensor head with a cotton swab soaked in alcohol, and then dry it.

3. Printer glue stick cleaning

The printer glue stick can improve the printing effect. During the printing process, the label paper will leave a lot of powder on the glue stick. If it is not cleaned in time, it will hurt the print head. Cotton swabs and alcohol can be used to clean the glue stick of the printer. After cleaning, it must be wiped dry.

4. Printer roller cleaning

After cleaning the print head, clean the rollers with a cotton swab (or wipes) soaked in 99.9% alcohol. The method is to rotate the roller by hand while scrubbing, and then dry it after it is clean. The cleaning interval of the above two steps is generally once every three days. If the barcode printer is used frequently, it is best to clean it once a day.

5. Drive system cleaning

Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission, and there is dust, which directly affects the printing effect, so it needs to be cleaned frequently. Usually once a week, the method is to use a cotton swab (or cotton cloth) soaked in alcohol to wipe the shafts of the transmission, the surface of the channel and the dust in the chassis, and then dry it after cleaning.

6. Clean the paper feed guide

There are generally no major problems in the guide groove, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it must be cleaned in time. When cleaning, just pull it out with a finger.

How To Clean A Thermal Printers(video)?

Nisca Cleaning Kits

Datacard/Fargo/DNP Compatible Adhesive Cleaning Card

Datacard/Fargo/DNP Compatible Adhesive Cleaning Card
Specifications

Card Reader Plastic Cleaning Card

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

Adhesive Cleaning Card

Evolis ACL003 Adhesive Cleaning Cards

Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)

1.Used for Datacard,Fargo,Zebra ZXP3/DNP Card Printers
2.Good Quality and Competitive price

Adhesive Cleaning Card

Description:
Card Readers require preventative maintenance for keeping the Magnetic Heads clean
and debris free from contamination build up.

Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and
increase the service life of the magnetic heads

Features

POS/ATM Machine CR80 Cleaning Card

CR80  is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.

Cleaning Card
-Excellent absorbency than the 100%polyester cleaning card

IPA Snap Swab

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.

Electronic-gradeIPA Snap Swab
-Easy,Effective,Safety;

Aluminium Foil
-Strong tightness and keep it longer;

Hot-press compound
-Make sure the most excellent cleaning effect;

Evolis A5024 Cleaning Wipes

Cleaning Wipes kit removes any dust to maintain excellent image quality, ensuring your ID card printer runs smoothly. Printer cleaning consumables.

Presat IPA wipes
-preventive maintenace for your printer.

Evolis Complete Cleaning Kit

Evolis Complete Cleaning Kit, Cleaning Cards

Evolis Complete Cleaning Kit, Cleaning Cards

Evolis complete cleaning kit with cleaning cards, swabs, and wipes includes everything you need to clean the inside of your Evolis printer.

The Evolis Complete Cleaning Kit, Cleaning Cards include everything you need to clean the inside of your Evolis printer to keep it working optimally.

Dust and other tiny debris can degrade your printed image quality and even damage your printhead or other critical parts of your printer.

With routine cleanings, you can expect optimal image quality and a longer life for your Evolis card printer.

Evolis leaning kits include pre-saturated cleaning cards, printhead cleaning swabs, and cleaning wipes to keep the cleaning rollers dust free.

As a professional printer clean card manufacturer, We will sell the best product to meet our friend’s demand, and we hope we can become the best partner!

Evolis Primacy card printer cleaning card

Evolis A5011 Cleaning Kits

Compatible with Evolis A5011 Cleaning Kits. Dust and debris can accumulate inside your printer and can potentially cause damage if left uncleaned.

Compatible Brand: Evolis

Product type: T-shaped long cleaning card, short  Adhesive card, Long Adhesive Card

 Adhesive PVC cards

Model code: T-shaped long cleaning card (ACL004), short adhesive card (ACL003), long Adhesive card (A5070)

Description: T-shaped long cleaning card (54x326mm), short Adhesive card (54x90mm), long Adhesive card (54x170mm)

Scope of application: cleaning the card passage of the printer.

Evolis Primacy Card Printer Cleaning Pen

Evolis ACL005 Cleaning Pens

The IPA printhead cleaning pen is designed to effectively remove debris, dirt, grime and contaminants remaining in the printhead.

Compatible Brand: Evolis/Ailis

Product Type: Cleaning Pen

Model code: ACL005

Scope of use: cleaning the print head

 

 

 

 

 

Evolis Primacy Card Printer Cleaning Stick Swab

Evolis ACL007 Cleaning Swab 3PCS

Evolis ACL007 Cleaning Swab, is designed to clear away ink residue and dust from the inner workings of your printer easily, extending print performance.

Compatible Brand: Evolis

Product Type: Soaked cleaning Swabs, Squeezed foam Swabs

Model code: soaked cleaning swab ACL007, extruded swab A5003

Scope of use: cleaning the print head, cleaning the dust inside the printer

 

Evolis Primacy Card Printer Cleaning wipes

Compatible Brand: Evolis

Product Type: Cleaning wipes

Model code: A5024

Scope of use: Wipe the card passage of the printer, clean the inside and outside