Home » Thermal Printer Printhead » Page 4

Universal Cleaning Card For All Card Reader

Posted on July 12, 2022May 5, 2023 by Adminsoft

The card printer cleaning card is very important to the maintenance of the card equipment. Generally, during the printing process, the equipment itself must be cleaned after a fixed number of finished products are printed.

Generally, there are 54*86mm soaked IPA cleaning cards, 3M sticky cleaning cards, and T-type or I-type long cards for overall cleaning of the transmission wheel.

CR80 Universal Cleaning Card

Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.

CR80 Card Reader Cleaning Card has a wide range of uses, and can be used for cleaning ATM machines, POS machines, subway top-up machines, thermal punch-in machines, card readers, hotel access control systems, top-up machines, gas station IC cards and other products.

These machines will be insensitive to card reading during frequent use, because they are affected by dust, particles and other pollutants. Many people in U.S. still use the oldest cleaning method. Professional maintenance personnel open the machine for maintenance, and the maintenance cost is very high. , Some even directly replace the system that cannot read the card, which causes a very high cost.

The cleaning card solves the maintenance troubles of non-professionals. It can quickly remove dust and other pollutants from the machine, save time and effort, and bring the machine back to life when the machine fails. It is a good product and has a future. The market for cleaning cards and cleaning kits in foreign countries is very large. There are still some concepts that have not changed. Most people are professionals to maintain and clean with a brush, which is easy to cause damage to the sensitive read-write head, and the gain outweighs the gain.

But now many manufacturers of card machines are beginning to realize this, and more and more people will rely on cleaning cards, making the cleaning cards fully functional!

In order to improve the cleaning effect, our cleaning cards are generally soaked in IPA solution, which not only can quickly remove the dust, but also evaporates quickly, and there will be no residual substances attached to the equipment.

Thermal Printers Cleaning Cards Zebra Magicard Evolis

Posted on July 5, 2022May 5, 2023 by Adminsoft

Thermal printers cleaning cards zebra magicard evolis card printer cleaning card

Card reader cleaning cards will securely and also effectively get rid of dust, magnetic oxides, oils, creams, and various other pollutants improved magnetic head.
Cleaning cards are an affordable method to keep your card visitors as well as prolong the life of magnetic heads.

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

It will clean:

Swipe Atm machines Credit/Debit card viewers POS terminals PVC card printer Access control card viewers Gasoline station devices Pay phones Resort door locks Parking system equipment IC card readers Smart card viewers A lot more hand-operated swipe visitors and insertion viewers.

Usage: To cleanse the swipe readers: Just swipe the cleansing card with the card viewers back and forth, until there are no deposits in card reader.
To cleanse the insertion visitors: Place the cleaning card into the visitor, after that stopped. Repeat this action numerous times, until there are no residues in card visitor. After cleaning, just get rid of the card.

We recommend: Once daily for external or high use card readers.

Compatible Alcohol T-card Cleaning Kits for Zenius/Primacy Printer

Posted on May 6, 2022May 5, 2023 by Adminsoft

Evolis High Trust Original/Compatible Alcohol T-card Cleaning Kits for Zenius/Primacy Printer

CR80 is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.

Key Specifications/Special Features:

Specifications

1. Factory direct price.
2. All Evolis kits.
3. Free samples.

Materials: cellulose polyester+PVC+cellulose.
Technology: hot press compound.
Package: aluminum foil bag.
Packing: 10 T cards/bag.

Compatible printers: Evolis Zenius and Primacy

Keeping your printer clean will ensure printer functionality and prolong the lifespan.

Keep your card printer clean with the Evolis ACL004 T-Card cleaning kit. Containing 10 T shaped cleaning cards, this kit saves you money by extending the life of your Evolis printer and print head. The T shape of these cards allows you to remove dust, oils and debris from the inside of the machine, which can potentially be harmful if left untreated. This cleaning kit is an excellent solution for maintaining the outstanding print quality of your card printer.

Evolis ACL004 adhesive cleaning ‘T’ cards offer an easy and inexpensive way to maintain your printer’s optimal printing functionality.
Evolis ACL004 cleaning cards feature a low-tack adhesive that cleans dust and other debris from your Evolis printer’s card rollers.
To help avoid damage to your printhead and help ensure the quality of your printed cards.

Ic Reader Cleaning Card Hotel Door Lock

Posted on May 5, 2022May 5, 2023 by Adminsoft

Ic reader cleaning card hotel door lock

Specializing in the production of various types of cleaning cards, suitable for all types of card reading equipment.

Since we applied for and obtained the national patent in 2009, we have been committed to the development of this field, and have won praise from customers for our diversified products, stable quality, timely delivery and flexible service.

Regular use of cleaning cards to clean your machine will keep your machine in working condition and prolong its service life.

Ic Reader Cleaning Card Hotel Door Lock

We can clean all these devices with cleaning cards: bank card terminals, cash counters, ATMs, POS terminals, card printers, thermal printers, fuel dispensers, access control devices, pay phones, vending machines, ticket vending machines, hotel doors Locks, key cards, etc.

1.This card presaturated with IPA
2.It has excellent absorbency
3.Keep the heads clean and health
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up.

Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads

Cleaning card Selling Point :

1. Our material is Blend cellulose polyester spunlace, not 100%polyester
2. Extremely absorbent, It is higher than 100% polyester
3. Volatile time is longer, It is good for cleaning.
4. Our packing is aluminum foil, It is good for storage

Classification introduction of non-contact IC card and contact IC

Non-contact IC card, also known as radio frequency card, is composed of IC chip and induction antenna, which are packaged in a standard PVC card, and the chip and antenna have no exposed parts. It successfully combines radio frequency identification technology and IC card technology, which ends the problem of passive (no power supply in the card) and contact-free, and is a major breakthrough in the field of electronic devices. The card is close to the surface of the reader at a certain distance (usually 5-10cm), and the data reading and writing operations are completed through the transmission of radio waves.

Contactless IC cards:

1). Radio frequency encryption (RF ID)—ID card. The information access of the radio frequency card is accomplished through radio waves. There are no mechanical points of contact between the host and the RF. Such as HID, INDARA, TI, EM, etc. The meal card (thicker) and access control card used by most campuses are ID cards.

2). Radio frequency memory card (RF IC)—–non-contact IC card. Radio frequency memory cards also access information by radio. It increases the radio frequency transceiver circuit on the basis of the memory card. Such as MIFARE ONE. The bus cards used in some cities in the early days, and the meal cards and hot water cards used in some campuses are radio frequency memory cards.

3). The radio frequency CPU card (RF CPU)—–an active card, which adds a radio frequency transceiver circuit on the basis of the CPU card. The CPU card has its own operating system COS, so it can be called a real smart card. Bus cards in big cities, financial IC cards, and meal cards in very few campuses are radio frequency CPU cards. The difference between contact IC card and non-contact IC card: The reliability of contact IC card and non-contact IC card is better than that of magnetic card, and it has a wide range of applications.

The non-contact IC card chip is encapsulated in PVC material, and the radio wave of the chip in the card can be remotely sensed with the card reading device to read the data. In contrast, non-contact IC cards have good confidentiality, high security performance, large storage capacity, and fast transmission speed.

Evolis Primacy Card Printer Regular Cleaning

Posted on March 11, 2022February 11, 2023 by Adminsoft

Evolis Primacy Card Printer Periodic cleaning method through machine panel operation.

The Primacy machine is operated through the machine panel for regular cleaning. Please follow the steps below for regular cleaning:

Repeated runs through the printer with the cleaning card clean the cleaning roller, maintaining print quality and extending the life of the printhead.

How to Clean the Evolis Primacy Printer. Insert the cleaning card in the opened feeder, adhesive face upwards. This starts the cleaning. Adhesive card.

1. Open the printer cover.

2. Take out the ribbon.

3. Close the cover and make sure to hear a click.

4. Open the card feeder on the printer.

5. Use the ruler to adjust the card thickness to the maximum position.

6. Take out all the cards in the card feeder.

7. Double-click the cleaning button on the control panel, and then insert the cleaning card .

8. Peel off the film on the cleaning card, insert the cleaning card into the card feeder according to the picture, with the sticky side facing up.

9. The used cleaning card will automatically pop into the output tray. Regular cleaning is done.

Rio Pro Card Printer Cleaning

Posted on January 17, 2021November 17, 2022 by Adminsoft

Printer cleaning consists of three parts. The cleaning rollers clean the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine.

Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong its service life of the print head. It is recommended to purchase related cleaning kits.

Rio Pro Card Printer Cleaning

To keep your Rio Pro working properly, you should clean the printer every time you change the dye film ribbon.
To do this, you need a Rio Pro turned on, a new cleaning card, and a cleaning pen as well as the new Cleaning Roller Assembly.

Magicard M9005-761 Card Printer Cleaning Kit 10 T-Type Long Card, 1 Cleaning Pen, 5 Cleaning Rollers. For the Magicard Rio, Tango and Avalon printers.

Steps for cleaning Rio Pro:

It is recommended to use a cleaning card to clean all the spindles in the machine and replace the cleaning rollers after each roll of ribbon is used. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings.

1. First, remove the card hopper and open the printer to remove the dye film ribbon and the blue sticky roller underneath it. Remove the metal bar from this blue roller, and set it aside in a safe place.
2. Use the menu on the front of the printer and navigate to the cleaning rollers option. Use the keys to work through the guidance messages ensuring your printer is ready for cleaning.
3. Open the pouch containing the new cleaning card and remove the card. Select “yes” on the printer, and insert the cleaning card. While the card is in the printer, the parts left by the printing process are removed with the alcohol in the card.
4. Flipping the card and repeating this process at least two to four times in order to get everything really clean. The cleaning process takes only a few seconds, and when it’s done you can clearly see the result.
5. Sometimes the Rio Pro’s rollers may be really dirty. In this case, you need to manually clean. Leave the automatic clean mode, and select move card from the main menu.
6. For the cleaning card in half, press it onto the main middle roller while holding down one of the move card buttons. Move the cleaning card back and forth for around 15 to 20 seconds. You can clearly see the dirt and debris removed by this process.
7. You may also wish to clean the Rio intake roller. Turn the printer around and pulled the upward move card button while pressing the cleaning card onto the Rio roller for 15 to 20 seconds. Again, this cleaning process leaves a clear result.
8. Finally, it is important to clean the printhead on the Rio pro. Gently move the pen across the printhead to remove any dust or residue.
9. After cleaning you’ll install a new sticky roller to the printer. Remove the roller from the dye film box, and insert the metal bar which you set aside earlier. Unwrap the roller and snap it into place directly above the orange roller towards the back of the unit. Removed the new roller dye film from the box and unwrap it. Place the dye film into the printer.
10. Gently close the lid of the printer and replace the card hopper in the back of the unit.
Your Rio Pro is clean and ready to print.

Have You Cleaned Your Card Printer?

Posted on November 17, 2019November 17, 2022 by Adminsoft

How often do you clean your card printer? Which brand you are using? Evolis, Magicard or Datacard ?

Do you remember when was the last time you cleaned your card printer? If not, you should pay more attention to your printer cleaning.

Many card printers contain a cleaning system to clean card when it is printing. But the components very easy to attract dust and debris as plastic cards have a high static charge. So if you have not cleaned your card printer regularly, it will reduce the quality of the print, resulting in fuzzy images.

It takes you just a short time and a few steps to do the cleaning job.

Have You Cleaned Your Card Printer?

Here are three basic steps:

1. Remove the ribbon.

2. Insert the cleaning card into the feeder.

3. Put back the ribbon.

Where do you get the printer cleaning kits?

Yousite provides various cleaning kits compatible with most hot brands in the market, such as Evolis, Magicard, Datacard, and many more. Click here for more information about Yousite cleaning kits.

How often should you clean your printer?

If you are using color ribbons, it is the best time to perform a cleaning cycle when you change your ribbon. When you use monochrome ribbons, you can perform a cleaning cycle per week or per month depending on the usage frequency of printing. It is recommended to set the firmware prompt to approximately every 250 cards.

If there are unprinted lines on the card printed, you should clean the printhead. We supply thermal printer cleaning pens and cleaning swabs to effectively clean the contaminant build-up on the printhead. If unprinted lines still exist, they may have permanent damage to your printhead. You will have to replace it.

Clean your printer regularly to prevent jams or other minor issues by using the automatic cleaning feature that’s available on most printers. Manually clean the paper rollers with a damp cloth to remove dirt and debris.

So if you want to buy any cleaning products for card printer cleanings, such as cleaning pens, cleaning swabs, cleaning wipes, or cleaning kits, please just feel free to contact us!