Product news
Best Way To Clean Credit Card Reader
When the card printer LCD screen displays “CLEAN PRINTER” or the printed image is not clear or complete. It is necessary to use a special cleaning card to clean the printer. In addition, during the printing process, when the sensor is dirty and the card is frequently stuck in the flipper and the “Mechanical” mechanical error is reported, it is also necessary to use a special cleaning card to clean it.
How to clean your credit card machine: tips and steps to follow.
The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer. So please try not to place the printer in a workplace with too much dust or strong sunlight.
- Regular cleaning of the printer will keep the printer in top condition, produce better quality results and avoid breakdowns.
- Before cleaning the printer, please clean the dust around the inside of the printer. (The surrounding dust may be rotated during printing, floating in the machine, and adsorbed on the print head due to static electricity, causing the print head to break the needle ) Cleaning wipes . Then use the cleaning card to clean the card reader ribbon.
- Recommended to use cleaning cards to clean all shafts in the machine. Replace the cleaning roller after each roll of ribbon. If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings .
- Cleaning of any printer consists of three parts. The cleaning rollers cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine. Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong the service life of the print head. It is recommended to purchase related cleaning kits .
- Before cleaning the printer, please use a cleaning swab to clean the dust inside and around the printer. (The dust floating inside the printer may generate static electricity during the printer’s working process. The dust is easy to attach to the print head and cause the print head to break the needle.) And then clean it with a cleaning kit.
- Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card. And the cleaning effect cannot be achieved.
Be careful not to damage the print head when opening or closing the cover.
Do not carry hard objects such as watches and rings when inspecting the machine. It is easy to touch the print head and damage the print head.
How To Clean A Chip Card Reader
How to clean a chip card reader?
What are the precautions for the use of IC card readers 1. Plug-in card holder
1. For the plug-in card holder, care should be taken to prevent the card from being inserted too hard. Too much force will damage the in-position switch of the card holder, and it will also damage the card to a certain extent.
2. Pay attention to keep the card clean. If the chip of the card is not clean, not only the card will not work normally, but also the contact point of the card holder will be polluted.
3. It is very important to operate after the card is in place. If the reader powers on the card under unstable conditions, it may cause damage to the card.
4. After the operation of the card in the plug-in card holder is completed, the application program should first send a command to the reader to power off the card, and then pull out the card after power off. Pulling out the card without power off may cause damage to the card.
2. Push-push deck
1. The push-push card holder adopts the push-in card, and the card will pop out when the card is pushed in again when it is taken out. This structure reduces the friction between the card and the electric shock, and has certain advantages in protecting the card. But it can also damage the card if not used correctly.
2. The most common error is that when taking out the card, instead of pushing it in again to make the card pop up automatically, and directly pulling the card out, this situation will seriously damage the card and the card holder.
3. Pay attention to keep the card clean. The card holder of any structure will eventually be in close contact with the chip of the card, so if the chip of the card is not clean, it will pollute the contacts of any kind of card holder.
3. The environment and method of using the IC card
Proper storage and correct use of cardholders are the most economical and effective means to prolong the service life and reliability of IC cards. Proper storage, no random bending, no random contact with the contacts, no random access to strong static electricity environment, pay attention to keep the card surface clean, etc., will help to improve the reliability of the IC card and prolong its service life.
4. Use of cleaning card
The cleaning card is a cleaning measure used after the reader has been used for a period of time and the contacts of the deck are polluted. The method of using the cleaning card is: insert the cleaning card into the reader-writer when the power is cut off, and then clean the electric contact of the deck after inserting it back and forth.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…
The cleaning card is made of polyester, polyethylene, polypropylene or hard paper.
The base material of the CR80 cleaning card is PVC, and the two sides are laminated with wood pulp polyester spunlace cloth, which is soaked in IPA solution.
Inserted into the card machine, and inserted and pulled out several times to clean the card. It is very convenient to clean the contact surface of the machine, and the effect is obvious, which can effectively ensure the long-term normal operation of the card machine.
How to Clean a Card Reader?
Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.
1. The IC card reader should be placed on a fixed platform, away from strong magnetic fields. The working environment should be kept tidy, and the surface of the machine should be kept clean.
2. Do not allow foreign matter to enter the IC card reader from the cardholder entrance. Including water, oil, etc.
3. Regularly clean the deck to keep reading and writing correct. Method: Dip the “cleaning card” with a little alcohol, insert it into the card holder, move back and forth, left and right for several times, then pull it out, wait for a few minutes and then use it.
4. If the IC card reader is faulty, please hand it over to the maintenance personnel.
5. If it needs to be transported, please use the original packaging to avoid severe impact.
Precautions
To prolong the life of the IC card reader, you must maintain the IC card reader.
IC card (Integrated Circuit Card,), also known as smart card, smart card (Intelligent card), microcircuit card or microchip card, etc.
Where is The Cleaning Card Manufacturer?
Where is the cleaning card manufacturer? Which is the better quality
Where are the manufacturers of cleaning card products? Which one is better in quality! Clean Kachina brand – Yousite! Yousite company specializes in the production of cleaning cards , dust-free cotton swabs, cleanroom cotton swabs, etc., with reliable quality, selling well all over the country, and being praised by new and old customers! Welcome new and old customers to consult and purchase: beck@yaostbio.com .
1. In terms of product quantity
The number of cleaning card products must be effectively increased and expanded, not only to meet the growing needs of domestic printer manufacturers, but also to adapt to the latest developments in foreign printer production, actively expand exports, and actively provide foreign printer companies with what they need. Printer cleaning card products required.
2. In terms of product quality
Keep your Fargo ID card printer running smoothly with this 86177 Cleaning Kit with 3 long cleaning cards, 10 adhesive cleaning cards, and 4 cleaning swabs.
In terms of product quality, we must also strive for excellence. To manufacture advanced and high-quality products, the quality must be stable and reliable, not only to meet the precise requirements of the process, but also to ensure the processing quality of the printer. Rod head goes one step further to improve product quality and cleaning effect.
3. In terms of product categories
The types of cleaning card products must also be continuously increased, not only horizontally, but also vertically, to increase the breadth and depth of products, to continuously expand and extend on the original basis, and more importantly, to check for deficiencies and fill in gaps, and strive to be complete. .
Special Cleaning Card, Cleaning Kit for Precision Instruments
Special cleaning card and cleaning kit for precision instruments
Our cleaning cards are laminated with PVC and polyester wood pulp composite cloth, which has excellent water absorption and toughness, and the wood pulp can absorb the IPA solution to slow down the evaporation time.
Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.
我们的清洁卡采用PVC和涤纶木浆复合布层压而成，其具有优异的吸水性和韧性，木浆可吸收IPA溶液，以减缓蒸发时间。
All kinds of precision instruments special cleaning card, by the company’s own R & D, production. It is made of PVC material, special precision instrument, cleaning agent, non-woven flannel and vacuum aluminum plastic packing.
适用于专各种磁条刷卡器，IC卡读写器，银行自助设备，加油机等精密设备磁头、IC触点、读写头的清洁。
Apply to all kinds of magnetic stripe card reader, IC card reader, bank self-service equipment, refueling machines and other precision equipment head, IC contacts, reading and writing head cleaning.
Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)
兼容粘尘卡采用低粘粘性纸，可以清洁证卡打印机传送轮和粘尘轮上的灰尘，以避免损坏打印头并确保打印的质量。根据打印机的操作指南进行清洁即可。
Compatible adhesive cards use low-tack adhesive paper, which can clean the dust on the transfer roller and adhesive roller of the card printer to avoid damage to the print head and ensure the quality of printing. Clean it according to the printer’s operation guide.
能有效的防止精密电子设备由于灰尘、油污和水份引起的设备故障。
It can effectively prevent the breakdown of equipment caused by dust, grease and water.
使用简单方便，有效存贮时间为两年。有一定的溶液性清洁剂刺激性，无腐蚀性。易燃，避光，通风处保存。
It is simple and convenient to use, and the storage time is two years. There is a certain solution detergent, irritating, non corrosive. Flammable, protected from light and stored in a ventilated place.
In addition the company also produces clean cloth, clean foam swabs, cleaning rollers and other equipment cleaning tools, diverse styles, to meet the market most of the cleaning needs.
Zebra Card Printer Cleaning Kits Manufacturer Directly Sale
Manufacturer Directly Sale Zebra Card Printer Cleaning Kits
Use the Zebra Cleaning Kit to keep the inside of your Zebra printer free of dried up ink and debris that clogs the printheads. Which will extend the life of your printer.
Detail Description
Zebra printer cleaning cartridges, rollers, cards and swabs extend the life of your card printers and improve overall image quality.
Characteristics
Printhead—the most important and most expensive part in a card printer. Needs regular maintenance.
Compatible Zebra Cleaning Kits is specially designed to clean the printhead debris, the barrel is filled with IPA solution, it can be used for about 10 times for cleaning the printhead.
For applications on electronic printed circuit card (PCB) components, we use isopropyl alcohol to clean flux residues from PCB repair work and remodeling.
If the printer print head is hidden inside the printer, you can use a cleaning swab as the handle is more flexible.
used on most of Zebra card printers.
Zebra Clean Print Head pen
Applications
Zebra Cleaning Kits 105999-310 and 105999-311 is specially used for removing the residue built up on the card printer print head, it can be used on Zebra card printers ZC100&ZC300 series.
Compatible Zebra cleaning kit provides an easy and inexpensive option to maintain the performance and functionality of your ID card printer.
Zebra Card Feed Hopper Short T Cleaning Card. To clean the card feed hopper on Zebra ZXP1, ZXP3 card printers.
Simply insert the card feeder cleaning card into the card slot and run the cleaning cycle. Turn the cleaning card over and repeat the cleaning cycle again. And the printer is ready to use when cleaning is complete.
Our card feeder short T cleaning cards laminated with PVC and polyester wood pulp composite cloth. Which has excellent water absorption and toughness. And the wood pulp can absorb IPA solution to slow down the evaporation time.
Card Printer Alcohol Cleaning Swab
Fargo Card Printer Alcohol Cleaning Swab
IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.
Specifications
.Sterile Swabs;
.Clean the termal printhead;
. 4.5″ handle with IPA filled;
.free sample;
.OEM available;
Fargo card printer alcohol cleaning swab , 4.5” IPA Filled Reservoir Handle, 25/box;
Fargo Print Head Cleaning Swabs is easy, self-saturating foamtipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.
Cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.
To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.
The user then runs the swab over the print head until it is clean.
Datacard/Fargo/DNP Compatible Adhesive Cleaning Card
Datacard/Fargo/DNP Compatible Adhesive Cleaning Card
Specifications
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…
Adhesive Cleaning Card
Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)
1.Used for Datacard,Fargo,Zebra ZXP3/DNP Card Printers
2.Good Quality and Competitive price
Adhesive Cleaning Card
Description:
Card Readers require preventative maintenance for keeping the Magnetic Heads clean
and debris free from contamination build up.
Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and
increase the service life of the magnetic heads
Features
CR80 is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.
Cleaning Card
-Excellent absorbency than the 100%polyester cleaning card
Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.
Electronic-gradeIPA Snap Swab
-Easy,Effective,Safety;
Aluminium Foil
-Strong tightness and keep it longer;
Hot-press compound
-Make sure the most excellent cleaning effect;
Cleaning Wipes kit removes any dust to maintain excellent image quality, ensuring your ID card printer runs smoothly. Printer cleaning consumables.
Presat IPA wipes
-preventive maintenace for your printer.
Zebra Card Printer Cleaning Card
P330i/P120i/P100i Zebra Card Printer Cleaning Card
P330i Printer Cleaning Tutorial
Needed cleaning tools
The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.
1. Cleaning up card
2. Cleansing IPA swab
3. Cleaning rubber rollers
Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.
Use of cleaning tools
1. Initially open the printer and also obtain the ribbon.
2. Detach the packing bag and also put the cleaning card into the card input box of the printer.
3. Open the properties of the card printer motorist– >; device setups.
4. Select the Devices tab, and click the Printer Cleaning button to clean.
Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.
6. Get the cleansing swab, squeeze the cotton bud stick, and let the liquid drain to the head of the cotton swab.
7. Make use of a swab to carefully wipe the print head of the printer (wipe in one direction).
8. Await the liquid to dry and the body cleansing is finished.
Note – Two cleaning cards are needed for the cleaning procedure. A cleansing card coincides in size with a basic plastic card, we call it a “cleaning card”. The various other card is bigger as well as wider at one end, we call it the “Long Cleaning Card“.
Cleaning Process
1. Leave the printer powered on, or transform it on if it is out.
2. You can begin the cleansing procedure with one of the adhering means:
Press and hold the printer’s panel button for a couple of secs up until the message get rid of RIBBONTHEN CLOSE HEAD appears on the LCD.
Go to the P330i Printer Devices software application from your computer system as well as click the CLEAN button. The LCD will certainly show the REMOVE BOW AFTER THAT SHUT HEAD message.
3. Open up the major cover, release the printhead owner, and eliminate the bow. Close the printhead owner. The LCD panel will display the
EMPTY message.
4. Open up the card feeder cover, and afterward remove the card from the card feeder. The last card is tough to get rid of and can be left in the feeder. Press the panel switch on the front of the printer. Cards left in the feeder will be expelled. The LCD panel will certainly display the message tons CLEANSING CARD IN FEEDER.
5. Place the pre-soaked cleaning card right into the card feeder. The cleaning card will immediately be fed right into the printer and the cleaning procedure will certainly begin (there is a hold-up of a few secs after feeding the cleaning card prior to the cleaning step beginning). Throughout cleaning, the LCD will certainly display the message cleansing PRINTER.
6. When this part of the cleansing process is full, the cleaning card will pop out as well as the LCD will certainly present the message PRESS SWITCH TO CONTINUE.
7. After the user presses the panel button, the LCD will certainly show the message FEED LONG CLEANING CARD IN LEAVE. Place the longer end of the lengthy cleansing card into the card leave (located straight over the outcome hopper). When the user inserts a “normal” cleansing card right into the card slot, the LCD will display the INVALID
CARD, PRESS BUTTON message till the individual presses the panel button and also inserts a long card right into the card port.
8. The lengthy cleansing card will be immediately fed right into the printer and also the printing process will begin. The LCD will present the CLEAN PRINTER message once more.
9. When the cleaning procedure is total, the long cleaning card will pop out, and also the LCD will certainly show a READY message, indicating that the printer prepares to resume normal printing procedures.
Note – Two cleansing cards are required for the cleaning process. A cleansing card coincides with size as a general plastic card, we call it a “cleaning card“. The other card is larger as well as broader at one end, we call it the “Long Cleansing Card”.
Keep in mind – If the user does nothing right now (as an example, no lengthy cleansing card put), the LCD will transform to display CLEAN PRINTER after a timeout. The printer can print, however the LCD will remain to display CLEAN PRINTER.
This limited cleaning process does not execute a detailed cleansing. However, it can be done without the “lengthy cleaning card”.
To return the screen to READY, the user is required to perform the complete cleansing procedure from step 2 above with step 9 listed below making use of both lengthy and brief cleaning cards.
10. The cleansing card can just be used as soon as and also must be disposed of after usage.
Product Packaging Information: 25pcs/box.100 boxes/ctn.
Distribution Information:
2-3 weeks for shipment after order confirmation Requirements.
1. Blending polyester, spun shoelace, cellulose, and PVC card.
2. For cleaning impurities from Zebra printers.
3. P330i/P120i/P100i clean.
Description.
The saturated disposable cleaning card: for cleansing effectively dust, magnetic oxides, oils, particles, creams, as well as other pollutants from all kinds of ID card printers, scanners, visitors, and barcodes.
It is an economical way to maintain your card viewers and also boost the life span of the magnetic heads.
Cleaning Cards, Wipes & Supplies for ATM Equipment
High-Quality ATM Cleaning Card
1. Products Description This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions, and other contaminants from all types of concealed magnetic, photo, and optic sensors on all types of reader mechanisms.
Cleaning your Card Reader. it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer.
2. Cleaning Cards Specification
- High-quality Evolis card printer cleaning card/cleaning kit;
- Excellent cleaning effect
- Credit card size
- Cleaning card
CR80 Cleaning Card Printer Cleaning Consumables
3. Cleaning Cards Application
1) All Card Readers
2) ATM/POS Terminals
3) Petroleum Pumps
4) ID Printers
5) Optical/Barcode
6) Hotel Doorlock
7) Slot/Vending Machine
| Card Dimensions (L x W) | 2 1/8 “ x 3 3/8” |
| Card Thickness | 0.028” (+ 0.002 / – 0.001) |
| Card Construction | Non-woven / plastic / non-woven |
| Saturation | 99% Isopropyl Alcohol |
| Saturation Volume | 3 ML (+/- 0.5 ML) |
| Inner Pack | 50 saturated cards |
| Inner Pack Weight | 0.68 lbs |
| Inner Pack Dimensions | H: 3 11/32” W: 5 ¼” D: 2 3/8” |
| Inner Pack Construction | Standard Clay Coated Chipboard Box |
Standard Packing
25 pcs per box,100 boxes per case .
Cleaning wipes
IPA-soaked cleaning wipes are constructed of 100% wood pulp soaked in a 99.9% IPA solution for preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.
IPA-soaked cleaning wipes
Thermal Printer and Check Scanner Cleaning Card
Thermal Printer and Check Scanner Cleaning Card
Detailed introduction to Thermal Printer and Check Scanner Cleaning Card:
Thermal Printer Cleaning Cards were developed to provide a preventive Maintenance cleaning to remove dirt and debris from print heads.
By cleaning Your Thermal Printer on a regular basis you are maintaining the print image, Extending the life of the print head, and will have accurate and readable Print/barcode images.
Cleaning Card width should be determined by the maximum width of your thermal print head.
We can provide various sizes to fit most the thermal printer type. Cleaning cards, ATM/POS terminals cleaning cards Card Reader.
Cleaning Cards, suitable for all card readers, card printers, ATM/POS terminals, petroleum machines, smart cards, etc.
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated.
This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…
Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads
Thermal printers cleaning cards zebra magicard evolis card printer cleaning card
Card reader cleaning cards will safely and effectively remove dirt, magnetic oxides, oils, lotions, and other pollutants built on the magnetic heads.
Cleaning cards are a cost-effective way to maintain your card readers and prolong the life of magnetic heads.
It will clean:
Swipe ATMs Credit/Debit card readers POS terminals PVC card printer Access control card reader Gas station equipment Pay phones Hotel door locks Parking system equipment IC card readers Smart card readers More manual swipe readers and insertion readers Usage: To clean the swipe readers: Simply swipe the cleaning card through the card reader back and forth,until there are no residues in card reader.
To clean the insertion readers: Insert the cleaning card into the reader,then quit. Repeat this action several times,until there are no residues in card reader. After cleaning, simply dispose of the card. We recommend: Once per day for external or high usage card readers.
Card Readers Cleaning card
This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build-up. Pre-saturated Cleaning cards are a cost-effective way to maintain your card readers and increase the service life of the magnetic heads Card reader cleaning cards will clean:
- Credit & Debit Card Swipe Terminals
- POS Terminals
- Swipe ATM Machines
- Petroleum Pump Card Readers
- Credit Vending Machines
- Security/Time/Badge Readers
- Smart Card Readers
- Telephone Card Readers
- Slot Machines
- Hotel Door Locks
- Key Card Readers
Recommended Usage: Once per week for internal or low usage Card Readers and once per day for external or high usage Card Readers.
Yousite Examine Scanner cleaning card This Presaturated Cleansing Card is layout to clean effectively as it transfers through the feed course cleaning up the Sensitive Magnetic Heads, Lens, and also Move Rollers. This card protects against processing hold-ups and misreads as it gets rid of contaminants from check viewers/ scanner/MICR feed courses, rollers, as well as heads. A larger Surface Area Cleaning Card with a Broader Width and Longer Size design permitted the Scanner to Clean better and More Effectively. Preventive Upkeep Cleansing Cards have been accepted by OEMs to supply a Positive Cleansing Efficiency and also expand the Life span of the Examine Scanner.
Remove dust, debris, and oils that build up over time during the normal operation of your remote deposit check scanner. Check Scanner Cleaning Kit
Sizes Setup are readily available with a Basic thickness of Tolerance: 0.012″ +/- 0.003″ or (0.305 +/- 0.0762 in mm).
– 2.0 x 6.0 (inches) or 50.8 x 152.4 (mm).
Component Number: CSCC- 0206.
– 2.5 x 6.0 (inches) or 63.5 x 152.4 (mm).
Component Number: CSCC- 2506.
– 4.0 x 6.0 (inches) or 101.6 x 152.4 (mm).
Component Number: CSCC- 0406.
– 4.375″ X 8″ X 0.018″ or 111 X 203 （ mm).
Part Number: CSCC- 437508.
– 4″ X 8″ X 0.012″.
Part Number: CSCC- 0408.
– 4″ X 10″ X 0.012″.
Component Number: CSCC- 0410.
– 4.5″ X 7.25″ X 0.012″.
Part Number: CSCC-45725.
Pre-saturated as well as individually secured.
Lowers residue build-up without taking apart devices.
Quick, easy, economical preventative upkeep.
Application:
Tags and Invoices thermal printer cleansing card, including Receipt Printers/ Upc code Printers as well as Label Printers, and Tickets.
Printers, Airline Boarding Pass Printers, or Readers Cleansing Cards.
– Suggested Use: Once each day in high-use areas and when each week in reduced-usage areas.