Madica M315S card printer cleaning and maintenance
In order to better maintain the machine, please clean the machine in time.
Use a cleaning card to clean the color ribbon after a roll of ribbon is used up.
Clean the black belt with a cleaning card in time after printing 500 cards. If the machine is used in a dusty environment, it is recommended to increase the frequency of cleaning with the cleaning card.
1. Use a cleaning pen to clean the print head of the machine when the power is off.
2. The blue cleaning wheel rubber roller in the machine can be taken out frequently and rinsed on the faucet. After the water stains are dry, put it back into the machine. Note that the cleaning wheel rubber roller must be pressed down in place.
3. Use of machine cleaning card :
1) Take out the card from the card feeding box of the machine, take out the ribbon and cover the machine cover.
2) Press and hold the two buttons EJECT and RIBBON SET on the machine panel at the same time to enter the machine menu page: (EJECT on the machine panel: short press – move up, long press – exit or return to the previous level RIBBON SET: short press – move down, long press – confirm or enter the next level)
3) Long press RIBBON SET to enter the menu
4) Select 1.DIAGNOSIS, long press RIBBON SET to enter
5) Unpack the cleaning card, put the cleaning card into the card slot, select 2.CLEAN MODE and press RIBBON SET for a long time to confirm, the machine will clean automatically. (If the cleaning card is cleaned once, you can continue to clean it several times. When the cleaning solution on the cleaning card dries up, the cleaning card can no longer be used, and a new cleaning card needs to be replaced).