IPA Alcohol Cleaning Swab

IPA Alcohol Cleaning Swab

Printer Cleaning Swabs

Now many corporate offices have barcode printers, but usually they forget to maintain our barcode printers. The maintenance of barcode printers is very necessary. Doing a good job in daily maintenance will make our barcode printers work more efficiently. Use it for longer! Today, the editor will take you to take a look at the cleaning method of the barcode printer.

1. Clean the paper feed guide of the barcode printer Generally, there will be no major problems in the paper feed guide of the barcode printer, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it is necessary to clean the guide groove in time , When cleaning, just pull it out by hand.

IPA Alcohol Cleaning Swab

IPA Alcohol Cleaning Swab

2. Cleaning of the print head of the barcode printer

We need to clean the print head of the barcode printer regularly. And the tools only need cleaning swabs or cleaand alcohol. When cleaning the print head of the bar code printer, pay attention to turn off the power of the bar code printer first, turn up the print head, remove the ribbon and label paper, and wipe the print head lightly with a swab (IPA Alcohol Cleaning Swab) soaked in the print head cleaning solution. until clean, then gently dry the print head with a clean swab. Note that when we wipe the print head, try to keep it in the opposite direction. Keeping the barcode print head clean can get a good printing effect, and most importantly, it can prolong the life of the print head.

3. Cleaning of sensors in barcode printers

The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The cleaning tools and methods are similar to those of the print head.

4. Clean the drive system of the barcode printer

Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission. And there is dust, which directly affects the printing effect. So it needs to be cleaned frequently. Usually once a week, the method is to use alcohol-soaked swabs or IPA Cleaning Wipes to scrub the shafts of the drive, the surface of the channel, and the dust in the chassis, and then wipe dry with a clean swab or IPA Cleaning Wipes .
The above content is the cleaning parts and cleaning methods of the barcode printer. I hope it will be helpful to everyone. If you have other questions, you are welcome to contact us at any time. We Mingtu Enterprise purchases office furniture, office supplies, office equipment, etc. , has more than ten years of purchasing experience, providing one-on-one customer service, welcome to consult~
Posted in Applied Case Studies, Product News and tagged , , , , , , , .

Leave a Reply

Your email address will not be published. Required fields are marked *