Key Points: With the use of Magicard specialized cleaning cards, internal printer rollers are effectively cleared of dust, debris, and residual substances, improving print quality and the stability of automatic card feeding. Operating the cleaning card is straightforward, following these steps:
What you’ll need:
Magicard Enduro Printer Cleaning Kit, including:
PA long cleaning card
IPA sponge swab
Cleaning pen
Squeeze sponge swab
IPA wipes
Cleaning rollers
Watch the video for step-by-step instructions:
[ ]
Procedure for Cleaning Card Path and Drive Rollers:
Preparation Phase:
Press the “MENU” button and select “Clean Rollers”, follow on-screen prompts.
Remove the card hopper from the rear of the printer.
Open the top cover of the printer and remove the ribbon, keeping the cover open.
Using the Cleaning Card:
Open the packaging of the Magicard specialized cleaning card and remove it.
The printer screen will display “Ready to Clean,” press the “Yes” button.
Insert the narrow end of the cleaning card into the horizontal entry at the front of the printer; the printer will automatically clean the rollers.
Repeat Cleaning:
After the cleaning is complete, follow the on-screen prompt to determine if another cleaning is required.
You may remove and flip the card vertically to perform a secondary cleaning, ensuring thorough cleaning.
In addition to cleaning cards, there are a few other tools that can help you clean your printer. Cleaning pens and squeeze sponges are two popular options that can eliminate facial hair, debris, and scrunchies, improve print quality, and extend the life of your printhead.
For those areas that are difficult to clean, such as parts, we can use sponge cotton swabs with short or long handles to clean until every detail is cleaned.
Finally, don’t forget to use cleaning wipes to clean the printer’s interior and exterior housing, as well as contaminated components. This also includes cleaning parts, ensuring that all parts of the printer are kept clean.
Ensure your printer operates at its peak performance with our essential maintenance routine! We highly recommend incorporating regular printer cleaning into your routine, including cleaning the card path and replacing the cleaning rollers. This ensures your printer continues to run efficiently, delivering satisfactory print results every time you hit “Print”.
Don’t overlook printer maintenance! By regularly using Magicard cleaning cards, you can keep your printer in top condition, ensuring excellent print quality and consistent performance. Take action now to revitalize your printer and produce flawless documents with ease!
In the fast-paced environment of modern offices, an ID card printer is a vital tool for various tasks. However, amidst the hustle and bustle, maintenance and cleanliness often take a backseat. Yet, proper cleaning and upkeep not only prolong the printer’s lifespan but also enhance work efficiency, ensuring every printout is flawless.
A New Approach to Office Cleanliness: Effortless Handling of Busy Work Environments
Comprehensive Cleaning: Our cleaning kit offers a holistic solution, addressing both external surface wipe-downs and thorough internal cleaning. Restore your printer’s shine inside out with our easy-to-use kit.
Time-Efficient Solutions: Designed for simplicity, our cleaning kit saves you valuable time. With just a few minutes, your printer will be as good as new, freeing up more time for productive tasks.
Guaranteed Print Quality: Post-cleaning, your printer returns to its optimal state, ensuring impeccable print quality. Whether for routine office tasks or critical documents, expect nothing less than perfection with every print.
Eco-Friendly Sustainability: Focused on Green Cleaning
We’re committed to eco-friendly sustainability. All our cleaning products are made from environmentally friendly materials, ensuring zero harm or pollution. By protecting your office environment, you’re also contributing to our planet’s well-being.
Full Assurance: Customer-Centric Service for a Worry-Free Experience
With our cleaning kit, you receive full assurance and support. Whether it’s addressing product quality concerns or answering usage queries, our prompt assistance ensures you can use our products worry-free.
Don’t wait for printer malfunctions or deteriorating print quality to start cleaning and maintaining. Choose our cleaning kit now and empower your ID card printer to effortlessly handle busy office environments, maintaining peak performance for heightened efficiency in your workplace!
ATM/POS terminals and card printers are essential tools used in a variety of industries, including financial institutions, retail stores, and healthcare facilities. These devices process and handle sensitive information, making it critical to ensure they are properly maintained and functioning at their best. Regular cleaning of ATM/POS terminals and card printers with cleaning cards is essential to maintain optimal performance, prevent downtime, and protect sensitive information.
ATM/POS Terminals Cleaning cards:
ATM/POS terminals are used for processing credit and debit card payments, making them a prime target for germs and dirt. The constant handling of these machines by multiple users increases the risk of transferring germs, and the accumulation of dust and debris over time can cause malfunctions.
Use Yousite’s cleaning card to clean atm equipment
Cleaning cards are designed to remove dirt, dust, and other contaminants from the magnetic heads and other critical components of ATM/POS terminals. These cards are made with a special material that is able to collect and remove dirt and debris from the magnetic heads and other sensitive areas of the device.
To clean an ATM/POS terminal, insert the cleaning card into the card reader and allow it to run through the machine. The card will collect any dirt or debris and leave the magnetic head clean and functional. It is recommended to clean ATM/POS terminals every 2-3 months or whenever they become visibly dirty.
Regular cleaning of ATM/POS terminals with cleaning cards can help prevent downtime caused by malfunctions and protect sensitive information from being compromised. Additionally, it can help prevent the spread of germs and create a more hygienic environment for users.
Card Printer Cleaning:
Card printers are used to print identification cards, such as employee badges, membership cards, and driver’s licenses. Like ATM/POS terminals, card printers are also prone to dirt and dust accumulation, which can cause malfunctions and damage to the printer.
Cleaning card designed for card printers use a similar material to those used for ATM/POS terminals. They are inserted into the printer and run through the machine to remove any dirt, dust, or other debris that may have accumulated on the printer’s rollers or other sensitive areas.
Yousite carries cleaning kits for ID card printer manufacturers including Magicard, IDP Smart, Fargo, Datacard, Javelin and Evolis, Zebra (Eltron). Yousite company offers many OEM cleaning card solutions to suit your needs, including private label cleaning card. Order online today!
It is important to clean card printers regularly with cleaning cards to prevent malfunctions and ensure the printer is producing high-quality prints. It is recommended to clean card printers every 2-3 months or whenever they become visibly dirty.
Card Printer cleaning cards are an affordable and effective solution for maintaining the performance of card printers and preventing downtime caused by malfunctions. Regular cleaning can also help extend the life of the printer and ensure it is functioning at its best.
Advantages of Cleaning Cards:
The advantages of cleaning cards for ATM/POS terminals and card printers are many. These advantages include:
Increased lifespan: Regular cleaning with cleaning cards can help extend the lifespan of ATM/POS terminals and card printers by preventing malfunctions and reducing downtime.
Improved performance: Cleaning cards remove dirt and debris that can cause malfunctions and poor performance, ensuring that devices are functioning at their best.
Cost-effective: Cleaning cards are an affordable solution for maintaining ATM/POS terminals and card printers, preventing the need for expensive repairs or replacements.
Hygiene: Regular cleaning with cleaning cards can help prevent the spread of germs and create a more hygienic environment for users.
Conclusion:
Cleaning cards are an essential tool for maintaining the performance and security of ATM/POS terminals and card printers. Regular cleaning with cleaning cards can prevent downtime caused by malfunctions, extend the lifespan of devices, and protect sensitive information. It is recommended to clean ATM/POS terminals and card printers every 2-3 months or whenever they become visibly dirty. By using cleaning cards regularly, businesses can ensure that their devices are functioning at their best and create a more hygienic environment for users.
IC card reader cleaning card is a cleaning tool widely used in modern life, especially in the fields of finance, telecommunications, medical treatment, transportation, etc., the use of IC card reader cleaning card is very important.
First of all, the use of the IC card reader cleaning card can effectively remove the dust, dirt and residues in the card reader, and keep the card reader clean and working normally. These dust and dirt will enter the inside of the card reader, reduce the reading speed of the card reader, and even cause the card reader to fail to read the IC card normally. Therefore, it is very important to clean the card reader in time. The IC card reader cleaning card is made of special materials, which can effectively clean the dirt inside the card reader, maintain the normal reading speed and accuracy of the card reader, and ensure the safety of the IC card.
Secondly, the IC card reader cleaning card is easy to use, safe and reliable. Simply insert the cleaning card into the card reader, press the card reader button, and let the cleaning card swipe back and forth in the card reader several times to complete the cleaning process. The cleaning card uses a special material that will not cause any damage to the card reader or affect the performance of the card reader. Therefore, the use of cleaning cards is very safe and reliable, and does not require special professional skills.
Card Readers require preventative maintenance for keeping the Magnetic Heads clean and debris free from contamination build up. Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and increase the service life of the magnetic heads
Finally, the use of IC card reader cleaning cards can prolong the service life of the card reader and reduce the cost of maintenance and replacement. As dust and dirt inside the card reader can affect the performance of the card reader, the life of the card reader will be shortened, requiring more frequent repairs or replacements. However, using the cleaning card can effectively clean the dirt inside the card reader, ensure the normal operation of the card reader, prolong the service life of the card reader, and reduce the cost of maintenance and replacement.
In short, the IC card reader cleaning card is a widely used cleaning tool in modern life. It can not only ensure the normal operation of the card reader, but also prolong the service life of the card reader and reduce the cost of maintenance and replacement. In the fields of finance, telecommunications, medical care, transportation, etc., the use of IC card reader cleaning cards is very important.
In the bustling world of electronic transactions, the devices that read our cards play a vital role.
Think of credit card machines at the store, ATMs, or even the card scanners at your workplace.
To keep these gadgets running smoothly, regular maintenance is a must. Enter the double-sided pre-saturated card cleaning card – a simple solution to tackle the dust, lint, and other gunk that can mess with these machines.
Understanding the Cleaning Card:
Our cleaning solutions empower banks & credit unions to easily maintain their branch technology to attain the best performance results.
Imagine a small card, not much bigger than your credit card. It comes in a handy aluminum foil pack, ready to use. Just pop it open, and you’re good to go!
What’s Inside:
This little card is like a superhero for your card machines. It’s got a special cleaning liquid that wipes away all the tiny bits that can cause problems. And the best part? It won’t harm you or the machine.
How to Use It:
Using the cleaning card is as easy as it gets. Open the pack, and you’ll find a slightly wet card. Swipe it over the card reader in your device, and you’re done. No need for fancy techniques or special skills. Plus, you can use it several times after opening the pack.
Why Bother?
Card machines have tiny parts, like magnetic heads, that can get messy over time. Dust and other stuff can mess with how they read cards, causing errors or delays. Regular cleaning with these cards keeps everything running smoothly.
Why It’s a Good Idea:
Keeps Things Running Smoothly: A clean machine works better. You don’t want errors or delays when you’re trying to buy something or get cash from an ATM, right?
Makes Machines Last Longer: Just like your car needs a regular oil change, these machines need a little TLC too. Cleaning them regularly helps them last longer, saving you and the business money.
Keeps Transactions Secure: If the machine is working well, your transactions are more likely to be secure. It’s like making sure the doors of your house are locked – a small step for peace of mind.
Where You’ll Find Them:
These cleaning cards aren’t just for stores. They’re handy for ATMs, secure doors at work, and even the card keys at hotels.
In a nutshell, the double-sided pre-saturated card cleaning card is a little hero for your card machines. It’s easy to use, won’t cause any harm, and keeps everything ticking along smoothly. As technology keeps zooming ahead, it’s nice to know that a simple solution like this can keep our everyday transactions hassle-free. Just swipe and go!
With the vigorous development of the Internet of Things industry. The technical requirements for radio frequency identification based on contact IC card reading and writing are also constantly improving. IC cards and IC card readers are widely used in various industries. Common IC card readers mainly include contact IC card readers and non-contact IC card readers. Today we will focus on the daily cleaning and use skills of contact IC card readers.
IC card reader
Specially designed to read and write contact IC cards (that is, IC cards with leaking chips). And communicates through the contact between the metal contacts of the reader and the metal pins of the IC card. Do that the communication is stable Good performance and speed.
Contact IC card readers are often used in daily life. For example, used in gas station fuel dispensers, tax declaration cards, self-service terminals and other equipment.
Since the contact IC card reader needs to contact the metal contacts of the contact IC card with the metal pins through a dedicated contact card holder for communication. It needs to constantly insert and pull the contact IC card.
Therefore, the following points need to be paid attention to in the process of using the contact IC card reader:
1. Plug-in deck
1. Too much force will damage the in-position switch of the card holder. And it will also damage the card to a certain extent.
Currency counter cleaning cards are the fast and easy way to clean your Bill Counting Machine. The special technology design removes dirt, dust and oil.
2. Pay attention to keep the card clean. If the chip of the card is not clean, not only the card will not work normally, but also the contact point of the card holder will be polluted.
3. It is very important to read and write after the card is in place. If the reader powers on the card in an unstable situation, it may cause damage to the card.
4. After the reading and writing of the card in the plug-in card holder is completed. The application program should first send a command to the reader to power off the card, and then pull out the card after power off. Pulling out the card without power off may cause damage to the card.
2. Push-push deck
1. The push-push card holder adopts the push-in card, and the card will pop out when the card is pushed in again when it is taken out. This structure reduces the friction between the card and the electric shock, and has certain advantages in protecting the card. But it can also damage the card if not used correctly.
2. The most common error is that when taking out the card, instead of pushing it in again to make the card pop out automatically. Pulling out the card directly, this situation will seriously damage the card and the card holder.
3. Pay attention to keep the card clean. The card holder of any structure will eventually be in close contact with the chip of the card. So if the chip of the card is not clean, it will pollute the contacts of any kind of card holder.
3. The usage environment and method of IC card
Proper storage and correct use of cardholders are the most economical and effective means to prolong the service life and reliability of IC cards. Proper storage, no random bending, no random contact with the contacts, no random access to strong static electricity environment, pay attention to keep the card surface clean, etc., will help to improve the reliability of the IC card and prolong its service life.
4. Use of cleaning card
Removes built-up dirt, dust, oil and other contaminants to keep your readers functioning properly.
CR80 cleaning card is used to clean the card slot of the card reader. Just put the cleaning card into the card slot, and it can be cleaned easily after repeated several times.
CR80 cleaning card for inkjet compatible printing and ATM, POS terminal, cash register….
The cleaning card is a cleaning measure used after the reader has been used for a period of time and the contacts of the deck are polluted. The method of using the cleaning card is: insert the cleaning card into the reader-writer when the power is off, and then insert it back and forth to clean the electric shock of the card holder.
The cleaning card is made of polyester, polyethylene, polypropylene or hard paper as the cleaning card base body. The surface of the cleaning card base body is heat-sealed or bonded with a layer of non-woven fabric.non-woven fabric containing abrasive (alumina or silicon carbide) Cloth, fine sandpaper, fine emery cloth or textiles with cleaning ability and other cleaning material layers, a cleaning card of a certain specification made according to the above structure, inserted into the card machine, inserting and pulling out the cleaning card several times, the card machine can be touched.
It is very convenient to clean the point surface, and the effect is obvious, which can effectively ensure the long-term normal operation of the card machine.
To guarantee a perfect function of the HITI CS200e & HITI CS220e card printer, your printer should be cleaned after 1000 card prints at the latest.
Cleaning can be started at the printer or via the device driver.
This will remove any dirt and dust that has entered the printer over time. Dirty rollers can no longer transport the cards properly in the card printer.
For Hiti Adehisive Cleaning Card Use In Hiti Cs200e Cs220 Cs200 Cs290e Id Card Printer , Find Complete Details about For Hiti Adehisive Cleaning Card
Cleaning pens: These can be used to clean the Hiti print head from dust and ribbon residue. Please proceed very carefully here, as the print head is extremely sensitive and very expensive. Cleaning pens can be used several times.
Cleaning sticks: These are designed to clean the Hiti printer in hard-to-reach areas and to clean the print head on re-transfer printers. Pressing on the style activates the cleaning fluid.
In daily life, there will always be small problems of this kind in electronic equipment, and the card printer is no exception. If we can pay attention to some small details of protection during the cleaning process of using the card printer to make the application more standard and effective. then It can also prolong the service life of our card printer and maintain it better. Here are some application standards of card printers and some tips during use!
Card printer specification:
1) In any case, prevent dust, dirt, food, liquid, etc. from entering the printer.
2) Do not open the top cover in most cases unless the ribbon is replaced.
3) Store consumables (ribbons, cards, etc.) in their packaging until ready to use.
4) Do not use contaminated consumables.
5) Store all consumables in a clean, cool, dry place.
6) Please put the paper and non-material into the printer in a hurry.
7) Do not block the power fan or exhaust hole at the rear of the printer.
8) Place the printer on a stable platform, not on the floor.
9) When placing the printer, keep it away from the exhaust vent (heating pipe, bellows port).
10) Do not use the printer to do things outside its scope of application.
11) When cleaning around the printer, close the cover to prevent debris from entering the printer.
12) Place the printer in a clean office environment and protect it from collisions.
Precautions for using the card machine:
1) Please turn off the power before plugging and unplugging the printing cable of the card printer, so as not to burn the data transmission port of the printer and the printing port of the computer;
2) Be careful not to hit the print head with hard objects when changing the ribbon or cleaning the printer, because the surface of the print head is hard and brittle and easy to be damaged;
3) Do not scrub the card printer with corrosive substances (such as Thinner), and do not use alcohol to clean the card wheel and print head of the printer for a long time;
4) If there are small spots on the printed card, pay attention to clean the card surface or the cleaning wheel inside the machine;
5) If the card printer stops moving for a long time during the printing process, click the computer screen with the mouse;
6) After using the card printer every day, turn off the power of the external power supply to ensure that the power supply is well grounded. If possible, use UPS to ensure the stability of the power supply.
7) The card printer must be cleaned once after printing a thousand copies with a color ribbon, and it needs to be cleaned when using a black ribbon (it is recommended to clean the printer every time the ribbon is replaced).
8) During the cleaning work, it is necessary to use professional cleaning cards for cleaning work, instead of using alternative or white cards for cleaning work. Otherwise, the cleaning work will seriously affect the print head.
Maintaining your check scanner involves three levels of cleaning: regular care (weekly), detailed cleaning (monthly), and exterior sanitization (as needed). The bank teller or employee who operates the scanner should be responsible for its upkeep, while the branch manager typically oversees the supply of cleaning materials.
The Importance of Cleaning Check Scanners
An extensive study conducted over a three-month period found that uncleaned check scanners encountered nearly twice as many errors as cleaned scanners. When check scanners get stuck, customers’ time is taken up while data needs to be manually entered into the banking system. The same study proved that approximately 15 minutes of every hour of the day is devoted to manually fixing problems that check scanners should be able to perform. This precious time that could be spent on customer facing can cost your financial institution money unnecessarily.
We all know that cleaning check scanners has many benefits. Not only is this completely necessary, spending a few minutes at each scanner can save you money and manual labor, and ensure your repeat customers aren’t frustrated by a lack of attention. Fortunately, cleaning check scanners doesn’t have to be complicated, expensive, or time-consuming.
How to Properly Clean Your Scanner.
Printer and scanner cleaning sheets effectively remove dust, ink residue, and paper particles, restoring print quality, preventing paper jams, and extending device lifespan—an easy and cost-effective maintenance solution.
Regular care of your check scanner is imperative. Routine cleaning approximately weekly, detailed cleaning approximately monthly, with exterior or sanitizing as needed . The cashier associated with the scanner should be the one who performs the cleaning, while the branch manager is usually the one who maintains the supplies. The following is the procedure for regular cleaning of the check scanner:
Cleaning method:
Turn Off the Scanner
Before cleaning, power down the device and unplug it to prevent damage.
Open the scanner cover to access internal components.
Clean the Exterior
Use a dry, soft cloth to wipe down the scanner’s outer casing.
Dampen a lint-free cloth with an approved electronic-safe cleaning solution and gently wipe the scanner’s surface.
Avoid using excessive moisture, as liquids can damage electronic components.
Clean the Internal Components
Use a check scanner cleaning card:
Insert the cleaning card into the document feeder.
Slide the leading edge forward while keeping the bottom edge flat.
Run the cleaning card through the scanner 3-6 times, flipping it each time to ensure thorough cleaning.
Discard the used cleaning card after use.
For stubborn residue or dust buildup:
Use a dry air blower or a soft-bristled brush to remove debris.
Avoid using compressed air cans containing moisture, as this can introduce condensation inside the scanner.
Clean the Scanner Glass
Gently wipe the flat glass surface with a clean, slightly damp cloth.
Ensure that no streaks or residue are left behind, as these can affect scan quality.
Let the Scanner Dry Completely
Wait a few minutes to allow all cleaned surfaces to dry before turning the scanner back on.
Make sure the paper feed roller is completely dry before inserting checks.
Perform a Test Scan
Insert a sample check to verify that the scanner is functioning correctly.
If issues persist, repeat the cleaning process or consult the user manual for additional troubleshooting steps.
Precautions:
1. Do not press hard on the glass surface inside the scanner.
2. Be careful not to scratch or damage the glass surface inside the scanner, and do not clean it with a hard or abrasive swab . Damage to the glass surface can reduce scan quality.
3. Please do not clean the scanner with thinner or corrosive solvents. These chemicals can damage scanner parts and the housing.
4. Be careful not to spill liquids on the scanner’s mechanical parts or electronic components. Doing so will permanently damage mechanical parts and circuitry.
5. Do not spray lubricant into the scanner.
6. Before using the scanner, make sure the paper feed roller is completely dry.
scanner common
Increased scanner noise.
Symptom: There is a lot of noise when scanning.
By the movement of the mechanical part when the scanner is working. There are two reasons, one of which is closely related to the scanning speed. According to the specific software of each brand of machine, setting the scanning speed to medium or low speed can solve the problem.
Only a small portion of the entire image is captured
Symptom: The scan result is only a small part of the original
This situation is mainly due to our operational problems. When scanning, the focus rectangle still stays on the preview image without zoom-in selection, so only the ‘area inside the rectangle is captured. Therefore, after the preview scan, be sure to correctly select the part to be officially scanned.
This phenomenon usually occurs when the office environment is poor. In the process of using the scanner, there will inevitably be some dust. If you do not pay attention to cleaning, the dust will adhere to the glass, and this problem will occur. At this time, we need to wipe the glass plate with a clean cloth or paper. Be careful not to wipe it with liquids such as water, which will make the scanned image appear iridescent.
If the problem persists after wiping the glass, it is a problem with our usage settings. For example, if we set a scanner with a scanning resolution of 300dpi to a resolution above 1200dpi to scan, the result will be blurred.
This kind of failure usually occurs when the scanner or the original moves while the scanner is working. Therefore, we need to provide a stable working platform for the scanner. And during scanning, do not move the original document.
When you use a barcode printer, you often encounter some problems. Come and see if you have encountered the same problem, let us solve it together?
1. Ribbon deviation during printing: the main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor cutting quality of the ribbon.
2. The printing is not clear and the quality is poor: there may be the following reasons: (1. The temperature of the print head is too low or the print density is too light; 2. The print head is not installed correctly; 3. The print head needs to be cleaned)
3. There is always a shallow thin line on the label printed by the printer: If your printer has such a problem, it proves that you have not done enough to maintain the printer.
When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.
If the printer punches a card and a large area of the card is not printed, there are two possibilities:
1. The print head is seriously damaged.
2. The data cable of the print head is damaged. (The damage of the print head is irreparable. In this case, only a new print head should be replaced.)
The way to avoid this situation is to:
1. Pay attention to cleaning the printer regularly.
2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions).
3. Be careful not to touch the print head when opening or closing the case cover.
4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).
4. Occasionally, some spots will appear on the label printed by the printer: 1. If there are some spots on the card you printed out, it is because there is dust in your printer, which needs to be cleaned in time.
It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage. 2. If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head. 3. The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (each card should be wiped with an eye cloth before printing), so that the printed card will not be flawed.
5. How to solve the problem of ribbon wrinkling
Reasons: 1. The carbon ribbon is not correctly wrapped around the machine; 2. The temperature setting is not correct; 3. The pressure and balance setting of the print head is not correct; 4. The media is not correctly set to feed the paper.
Solutions: 1. Reinstall the medium correctly; 2. Adjust the printing temperature to meet the printing requirements as much as possible; 3. Reset the lower pressure required for printing; 4. Reset the correct paper feeding amount of the medium.
If you have other questions, you can log in to our official website and get in touch with us: barcode printer
Clean the barcode printer regularly to ensure the printing quality:
1. When doing other things to expose the print head, remove rings, watches, long necklaces, status cards and any metal objects that touch the print head. Do not turn off the power of the printer when it is exposed near the print head, but to ensure stability. We recommend that you turn off the power. If the power is turned off, the user will lose temporary settings such as label formats and must reload these settings before resuming printing. 2. Only the designated cleaning agent should be used.
Steps to clean the barcode printer card:
1. Turn the power switch to the “ON ( | )” position, then press and hold the multi-function button for 5 seconds. 2. At the beginning of cleaning, the message REMOVE RIBBON THEN CLOSE LID will appear on the LCD. 3. After the ribbon is taken out and the cover is closed, the message EMPTY FEEDER THEN CLOSE COVER will be displayed. 4. If the lid is opened without removing the ribbon and then closed, the REMOVERIBBON THEN CLOSE LID message will continue to be displayed. 5. After removing the ribbon and closing the cover, the firmware will eject the unique card in the printer. The audio EJECTING CARD will be displayed. 6. The LCD will then show FEED LONG CLEANING CARD . In response to a cleaning card, the rollers feed the card into the printer. 7. When the card ejection sensor no longer detects the long cleaning card, the message INSERT FEEDER CLEANING CARD will be displayed. Open the feeder cover and insert the feeder cleaning card.
