10PCS Head Cleaner Cleaning Card for Magnetic Stripe Reader

10PCS Head Cleaner Cleaning Card for Magnetic Stripe Reader

Functions and Benefits: This double-sided pre-saturated cleaning card is created to securely and efficiently get rid of all dust, dust, ink, magentic oxide and other pollutants that build on magnetic heads of various sorts of visitors.

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

This Generic CR80 Card Reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, and lotions.

The cleansing cards are created of 45% wood pulp and also 55% polyester, the wood pulp has outstanding absorbency and can slow down the dissipation of IPA.

It is soaked with a 99.9% IPA remedy that properly gets rid of ink, debris, and deposit build-up on card printer transfer rollers.

The plastic handle of the IPA-soaked swab is full of 99.9% IPA remedy, and it can be used according to the cleansing procedure guide.

Instructions:

1. Tear open the bag and obtain the cleansing card.

2. Swipe the cleaning card via the card reader several times, after that turn it around and also repeat again.

3. Eliminate the card.

4. Repeat the above actions if needed.

Advised Usage:

1. As soon as per day for outside or high-usage card viewers.
2. As soon as each week for inner or low-usage card viewers. Warning: Flammable. Shut out of reach of children. Avoid eyes.

Dimension:3.34″ X2.12″ (85.8 mm X 54mm).

Active Component: Isopropyl alcohol.

Advised for:

All Card Visitors Swipe Atm Machines POS Terminals Access Control Units Hotel Door Locks Pay at the Pump PVC Card Printers Several Other Applications.

Madica M315S card printer cleaning

Madica M315S card printer cleaning and maintenance

In order to better maintain the machine, please clean the machine in time.

Use a cleaning card to clean the color ribbon after a roll of ribbon is used up.

Clean the black belt with a cleaning card in time after printing 500 cards. If the machine is used in a dusty environment, it is recommended to increase the frequency of cleaning with the cleaning card.

1. Use a cleaning pen to clean the print head of the machine when the power is off.

2. The blue cleaning wheel rubber roller in the machine can be taken out frequently and rinsed on the faucet. After the water stains are dry, put it back into the machine. Note that the cleaning wheel rubber roller must be pressed down in place.

3. Use of machine cleaning card :

1) Take out the card from the card feeding box of the machine, take out the ribbon and cover the machine cover.

2) Press and hold the two buttons EJECT and RIBBON SET on the machine panel at the same time to enter the machine menu page: (EJECT on the machine panel: short press – move up, long press – exit or return to the previous level RIBBON SET: short press – move down, long press – confirm or enter the next level)

3) Long press RIBBON SET to enter the menu  

4) Select 1.DIAGNOSIS, long press RIBBON SET to enter 

 5) Unpack the cleaning card, put the cleaning card into the card slot, select 2.CLEAN MODE and press RIBBON SET for a long time to confirm, the machine will clean automatically. (If the cleaning card is cleaned once, you can continue to clean it several times. When the cleaning solution on the cleaning card dries up, the cleaning card can no longer be used, and a new cleaning card needs to be replaced).

How to Clean a Thermal Printer with a Thermal Printer Cleaning Pen

How to Clean a Thermal Printer with a Thermal Printer Cleaning Pen

The Thermal Printer Cleaning Pen is an effective maintenance tool for thermal printers, designed to remove ink residue, burnt-on debris, and other contaminants from the print head, ensuring optimal performance and longevity.

A thermal printer is a type of printer that creates markings on a label or piece of paper by melting a section of thermal wax ribbon onto it. Thermal printers are typically used to print out barcode tags and labels. Most manufacturers recommend that the print head of the thermal printer be cleaned every time the ribbon is changed. Regular cleanings will prevent you from having to replace the thermal print head often, which is beneficial because the thermal print head is the most expensive replacement part on a thermal printer.

Yousite offers cleaning products designed to help remove adhesives, build-up, and gunky residue from Thermal Printers & liner-free label Printers.

Thermal printer Cleaning Pen

1. Thermal Printer Cleaning Pen Barrel is filled with 99.9% Electronic Grade IPA Solution.

2. Thermal printer IPA cleaning Pen which is designed to effectively remove ink residue, burnt-on debris, dirt, and contaminants from the Print Head.

3. Regular cleaning will extend the service life of the Print Head and achieve High-Quality Graphic Images.

Application

Recommended Usage: Use every time a new roll of the label, thermal paper or ribbon stock is needed or in emergencies to correct lines or imperfections in the printed copy.

Usage Directions:

  1. Open the thermal printer to expose the print head.
  2. Gently swipe the cleaning pen across the entire print head surface with light pressure.
  3. If necessary, repeat the process until the contaminants are removed.
  4. Wipe the pen tip on a clean paper surface after use.
Thermal Printer Head Cleaning Pen 99% IPA Solution

Printhead Cleaning Pen with 99% IPA Solution for Quickly Removing Contaminants from Thermal Printers Including Label Printer,…

All types of a thermal printers.

All brand ID card printers: Zebra, Fargo, Magicard, Evolis, etc.

Pcb, IC, cleaning fields.

We also offer a cleaning kit (including a cleaning card, cleaning swab, cleaning wipes, and cleaning roller)

Thermal Printer Cleaning Pens, 12/Box

This thermal printer cleaning pen is designed for use on thermal printers that have an accessible print head.

In short, the printer can be easily opened and the print head itself is exposed. Adding a little pressure as you move the pen across the print head will gently scrub off the burnt-on particles. The heat from the clean print head can then transfer to the print media. The cleaning pen barrel contains 99.7% IPA, the recommended cleaning solution by thermal printer manufacturers. It is recommended by thermal printer manufacturers to clean the print head with every change of paper or label stock for crisply printed material.

Pen Size = 14.5cm Length x 4.5cm Round Width
Pre-saturated felt within the pen
Reduces residue build-up without dismantling equipment
Quick, easy, inexpensive preventative maintenance

Applicable Printer Types:

  • Thermal Print Heads.
  • POS Thermal Printers.
  • Thermal Credit Card Printers.
  • Zebra Label Printers.
  • And other liner-free label printers.

This tool is essential for maintaining thermal printers and ensuring consistent, high-quality prints while extending equipment life.

Evolis ACL004 T Cleaning Cards

T Cleaning Cards for Evolis Printers

T Cleaning Cards for Evolis Printers

Compatible Evolis Primacy card printer cleaning card

Product type: T-shaped long cleaning card, short sticky card, long sticky card

Model code: T-shaped long cleaning card (ACL004), adhesive cleaning card (ACL003), long adhesive cleaning (A5070)

Description: T-shaped long cleaning card (54x326mm), adhesive cleaning cards 54 x 90mm, long adhesive cleaning (54x170mm)

Scope of application: cleaning the card passage of the printer

EVOLIS includes T-Cards for deep cleaning the card transport rollers on Evolis Zenius and Primacy printers.

Keeping your Evolis printer clean saves you money by extending the life of your print head and other moving parts.

Fortunately, proper maintenance of your Evolis printer takes very little time.

Evolis Cleaning Kit contains T-Cards and works with Evolis Zenius and Primacy card printers during deep cleaning cycles.

Product functions and features

1. Can effectively clean and maintain equipment
2. Removing dirt can reduce the read failure of the device
3. Simple operation, economical and effective

Yousite is a direct manufacturer of card printer cleaning kits, and the products can completely replace the original products. Not only the product price is low and the quality is high, but it can also reduce the transportation cost. Everything is based on the interests of customers. As long as there is a need, we will try our best to satisfy you. Yousite only makes high-quality products!

Evolis A5002 or CR80

Transport Rollers Cleaning Card

Maintaining the cleanliness of your card printer's transport rollers is essential for ensuring smooth card feeding and high-quality prints. Transport roller cleaning cards are specifically designed tools pre-saturated with cleaning solutions to effectively remove dust, debris, and other contaminants from these critical components.

What Are Transport Roller Cleaning Cards?

Transport roller cleaning cards are specialized maintenance tools pre-saturated with cleaning solutions, typically containing high-purity Isopropyl Alcohol (IPA). These cards are engineered to remove contaminants such as dirt, ink residue, adhesives, and other debris that accumulate on the transport rollers of card printers. Regular use of these cleaning cards helps maintain optimal print quality and prolongs the lifespan of the printer components.

Transport Rollers Cleaning Card

For use with all Evolis card printers · For the cleaning of card transport rollers · Pre-saturated cleaning cards packaged in an individual tear-open pouch.
The subway is a city's emerging traffic tool, carrying millions of flows daily. Subway cards as carrier material to take the subway, which greatly improves the convenience of people's travel. However, due to the metro card carrying a lot of dust, the credit card for a long time will cause the card slot card the accumulation of large amounts of dust, affecting the efficiency of a passenger car.

Evolis A5002 or CR80

Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.

These double-sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides, and other contaminants that build up on magnetic and optic reader heads. They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.

Facing this problem, how to solve it?

Yousite’s cleaning card can easily dispose of this puzzle. We are specializing in the production of cleaning cards, cleaning swabs, and cleaning kit manufacturers, for the subway card slot that is easy to dirty, and we are also through continuous testing, making our cleaning cards more easily, and more suitable for all subway stations. When the cleaning card slot is, you can first use our cleaning card clean, and then use a clean foam swab to erase the dust around the corner. If some induction card readers, don't put try our cleaning cloth, the effect is very good.
In addition, ticket machines, and vending machines in the subway is also can clean our products, if there are good cooperation intentions, may wish to discuss cooperation with Yousite. technology!

Recommended Cleaning Frequency:

It's advisable to clean your card printer's transport rollers at regular intervals, such as every time you change the ribbon or after a specific number of prints as recommended by the printer manufacturer. Regular maintenance helps in sustaining print quality and extending the printer's operational life.

Usage Instructions:

  1. Power Down the Printer: Ensure the printer is turned off and unplugged to prevent any electrical issues.

  2. Prepare the Cleaning Card: Remove the cleaning card from its packaging.

  3. Insert the Cleaning Card: Place the card into the card feed path as you would with a regular card.

  4. Initiate Cleaning Cycle: If your printer has a cleaning function, activate it. Otherwise, manually feed the card through the printer to allow it to clean the transport rollers.

  5. Repeat if Necessary: For heavily contaminated rollers, multiple passes may be required.

  6. Dispose of the Used Card: After use, discard the cleaning card appropriately.

  7. Power Up and Test: Plug in and turn on the printer, then run a test print to ensure optimal performance.

Product Options:

Here are some transport roller cleaning cards available in the market:

Cleaning Cards For Banknote Counters

Glossary Of Card Printer Terms

 Glossary of common card printer terms

Find definitions for printing terms and learn the jargon of the profession. To get what you need it helps to have the tools to describe it.

1: Barcode: It consists of a set of bars and spaces with different widths and different reflectivity. Combining according to the specified encoding and rules, it is used to represent a set of symbols for data.

 

2: Color matching: There are several color matching modes in the printer, these options are built in the original printer driver for easy selection. Color printing can be more clear, fine and accurate.

 

3: Contact IC card encoder: It is connected to the GEMPLUS GEMCORE 410 inside the printer through the ISO standard pins on the E-CARD platform. GEMCORE 410 converts the signal to RS-232 signal, and the application program can access it through the 9-pin communication port on the outside of the printer.

 

4: Non-contact IC card encoder: It is connected to the device through the antenna on the E-CARD platform. The application program can communicate with it through the external DB-9 pin communication port of the printer.

 

5: Printing Cards: The direct-to-card process is the process of printing digital images directly onto plastic cards with a smooth, clean, PVC surface.

 

6: Dpi (dots/inch): The unit of measurement for printer resolution. For example: 600DPI means that the printer can produce 600 dots per inch on the card. Note: 2400DPI in inkjet printing is equivalent to 300DPI in dye sublimation printing.

 

7: Double card feeder: Choose a printer with a capacity of up to 200 double card feeders. That is to say, you can load 200 same cards or 100 different cards into different card feeders at a time, which will be more effective. For example, if you use cards with gold and silver backgrounds, it is easier to distinguish the type of members, etc.

 

8: Dye-sublimation: It is the printing technology used by printers, which can produce smooth continuous tone, photo-quality images. This technology utilizes a dye-sublimation dye-based ribbon: the ribbon is divided into three color patches of yellow, magenta, and cyan. When the ribbon and card pass through the print head, tens of thousands of heat elements heat the dye on the ribbon, and the dye will vaporize and penetrate into the card surface after being heated. Different heat produces different color saturation and continuous color Mixed together, a continuous-tone, photo-quality color image is produced.

 

9: Edge-to-edge printing: used to refer to the larger printing surface of the card: printers with edge-to-edge capabilities can print to the edge of the card, without “white edges”.

 

10: Large-capacity printing: use less time to load and unload consumables and maintenance to produce cards quickly and excellently.

 

11: High resolution printing: This refers to printing full-color images onto the transfer film. The film is then transferred to the card by heat pressing. This revolutionary technology not only enhances the card’s durability and excellent color, but also can print to rough surface card. Such as: ID card and smart card.

 

12: High-speed printing: The card printer is the fastest among desktop printers. High-speed printing can make us produce cards more efficiently-saving time, money, and resources.

 

13: ISO: Magnetic stripe encoding specification defined by the International Organization for Standardization. The encoder supports high and low magnetic and 1, 2, 3 magnetic tracks.

 

14: Liquid crystal display: In the current operation mode of the printer, LCD-full crystal display-it shows the current working status and changes of the printer, and the LCD uses text to display error messages. This is easier to read than flashing lights.

 

15: Lockable card feeder: Some printers provide a lockable card feeder door. This lock is used to prevent white cards from being stolen, this feature is very useful when printing valuable cards. Such as prepaid cards, smart cards or cards with security features.

 

16: Magnetic stripe: The magnetic stripe refers to the black and brown magnetic stripes stuck on the card. The higher the density, the more difficult it is to read and write information on the magnetic strip. Magnetic stripes are commonly used in access control, attendance, dining, libraries and other fields.

 

17: Card output box: store printed cards. Sequence is FIFO – to issue and print sequential cards more quickly.

 

18: Lamination: Protective transparent or holographic laser anti-counterfeiting material covered on the card to increase the security and durability of the card. Thermal transfer film is a 0.25 mil TP material that enhances card security and durability. Polyguard film thickness is 1 mil and 0.6 mil; it can provide stronger protection, this kind of card is usually used in the field of high wear-resistant card.

 

19: Laminated color block: The transparent laminated color block is usually on the sublimation ribbon. This color block is automatically printed onto the card to prevent premature wear and fading of the image due to UV rays. All dye sublimation images must be covered with this film, laser security film to be protected.

 

20: Overedge: Refers to the larger printing area of ​​the card. Printers with an over-edge feature can print cards that are completely borderless.

 

21: Contactless card: Use the built-in antenna to realize non-contact use.

 

22: Resin thermal transfer: This technology is used to print clear black text information and barcodes that can be read by infrared and visible light barcode scanners. It can also be used to print fast, cheap monochrome cards. Like Dye Sublimation. It is similar to using the print head to transfer the color from the ribbon to the card, but the difference is that when the heat and pressure are applied, the color image penetrates below the surface of the card. This technology is used for monochrome cards for production.

 

23: Smart card: It has embedded a computer integrated circuit with a memory chip microprocessor chip. Several common types are: storage IC card, non-contact IC card, hybrid card, dual interface card, proximity card, etc.

 

24: Intelligent anti-counterfeiting: It enables the printer to print cards with custom anti-counterfeiting patterns, and the anti-counterfeiting patterns will fluoresce under the ultraviolet light.

 

25: Standard card: The size of the standard card is CR-80. CR-80 size is 85.6mm x 54mm.

 

26: Thermal transfer lamination: It is an anti-counterfeiting film for cards, with a thickness of 0.25 mil, which can increase the security and anti-counterfeiting of cards. It is often used in moderate security and anti-wear fields.

Zebra 105912-912 Cleaning Kit

Cleaning Card For ZEBRA

Cleaning card for ZEBRA

For Zebra card printers, you can find cleaning cards specifically designed to maintain their performance. These cleaning cards typically come pre-saturated with an isopropyl alcohol solution to clean the print head, rollers, and other critical areas inside the printer.

Zebra Cleaning Kit

Zebra printer cleaning kits cleaning cartridges, rollers, cards, and swabs.

Use a Zebra cleaning kit to keep your Zebra printer’s innards free of dried ink and print head-clogging debris, extending the life of your card printers and improving overall image quality.

Zebra Card Printers (formerly Eltron) start with innovative engineering to provide quality, on-demand card printing solutions for a variety of card types.

They personalize and laminate virtually every type of media, including blank and preprinted PVC cards, magnetic stripes, proximity, smart cards, and specialty key tags.

  • Zebra 105999-310 Cleaning Cards
    These are standard cleaning cards for most Zebra card printers. To clean the printhead and other internal components of the printer.

  • Zebra CR80 Cleaning Cards
    A more specialized cleaning solution for high-volume Zebra printers. To keep the printer functioning smoothly, ensuring the best print quality and reliability.

  • Zebra Cleaning Cards
    These are also commonly used for Zebra direct-to-card printers, designed to remove dirt, dust, and other debris that may affect the quality of prints.

Designed, manufactured, and marketed. Zebra Technologies is the worldwide leader in barcode label printers and plastic card printers used in automatic identification and plastic card personalization applications. For detailed information on  printers cleaning card, please contact us!

 

 

Thermal Printer and Check Scanner Cleaning Card

Dollor Bill Validator/acceptor Cleaning Cards

Dollor Bill Validator/acceptor Cleaning Cards

Dollor Bill Validator/acceptor Cleaning Cards work in all bill validators and readers regardless of manufacturer or model. They remove deposits dirty bills leave on read heads and rollers, and keep money flowing through your bill validators, readers, and currency handling equipment.

These disposable Dollor Bill Validator/acceptor Cleaning Cards: Designed to safely and effectively remove all dirt, magnetic oxides and other contaminants from all types of concealed magnetic heads, photo and optic sensors on all types of reader mechanisms.

We’ve tried many cleaning cards in the past and this is by far the best! This card effectively cleans the internal components of your bill acceptor without damaging its belts and rollers.

After purchasing self-service vending machines, many customers don’t pay attention to maintaining the equipment at all, which leads to the failure of the equipment to deposit money normally after using it for a period of time.

Most equipment manufacturers will not inform customers to do a good job of maintenance, because they can provide maintenance services because of equipment problems, which should increase the company’s income.

If the above phenomenon of not being able to feed banknotes occurs, it is recommended that you use our banknote validator cleaning card to remove stains and dust on the delivery rollers.
The following is the card after our customer cleaned the banknote validator.

There is an obvious black area on it.

Thermal Printer and Check Scanner Cleaning Card

Check Scanner Cleaning Cards

MARS MEI, COINCO, MAKA, CONLUX

Benefits of Using Cleaning Cards:

  • Improves Machine Reliability: Regular cleaning helps reduce misfeeds, jams, or errors in bill validation.
  • Extends Equipment Life: Proper maintenance prevents wear on the mechanical and sensor components.
  • Enhances Performance: Clean sensors ensure accurate bill recognition and acceptance.

Make sure to choose the cleaning card that matches the make and model of your bill validator to ensure compatibility and effectiveness. Cleaning cards usually come pre-saturated with isopropyl alcohol or specialized cleaning solutions to effectively clean sensors and bill paths without leaving residue.

Card Reader Cleaning Card For All Card Readers, ATM/POS/Door Lock and Card Printers

Zebra ZC100 Card Printer Does Not Feed The Card?

ZEBRA ZC100 card printer does not feed the card, how to solve the problem of card jam?

Recently, when a customer was using the ZC100 printer, it was prompted that the card feed was blocked, and the printer would not feed the card. The customer used the cleaning card to clean and maintain the printer. After the cleaning was completed, the printer could print a few pages or a few days normally.

From time to time, the same error of not feeding the card appears again. In this case, the cleaning operation again cannot solve the problem of the card feeding blockage. We think that the card feeding wheel of the machine has been used for a long time and is too worn, so the card feeding wheel needs to be replaced ,

(1) Remove the card feed rollers of the printer, confirm that it is too worn, and replace it.  

(2) Replace the card feed rollers with a new one, the problem of card feed jam is solved, and the printer can be used normally. 

 (3) Replace it and install it on the card feeding assembly of the printer.

Fargo 81518 Cleaning Kit

How to Clean Fargo DTC4500 Card Printer

How to clean the Fargo DTC4500 card printer.

Recommended to clean your Fargo DTC4500 card printer when you change your ribbon. All you need is a Yousite long cleaning card compatible with Fargo DTC4500.

Steps for cleaning Fargo DTC4500:

1: The maintenance and working environment of the card printer is an important factor affecting the operation and service life of the printer. So please try not to place the printer in a workplace with too much dust or strong sunlight.

2: Regular cleaning of the printer can keep the printer in a better condition, print better quality results, and avoid failures.

3: Before cleaning the printer, please clean the dust around the inside of the printer. And then Clean the card reader ribbon with a cleaning card.

4: Recommended to clean your Fargo DTC4500 card printer when you change your ribbon

If the machine is in a relatively bad working environment, please shorten the interval between two cleanings and increase the number of cleanings.

5: The cleaning of any printer consists of three parts. The cleaning wheel cleans the card; the cleaning pen cleans the print head; the cleaning card cleans all the rollers in the machine.

Three parts are indispensable: Use the cleaning pen to clean the print head. It can better protect the print head and prolong its service life of the print head.

Recommended purchasing related cleaning kits.

6: Before cleaning the printer, please use a cleaning stick to clean the dust inside the printer and around the printer (the dust floating inside the printer may be charged with static electricity due to the operation of the cooling fan during the working process of the printer, and it is easy to be adsorbed on the print head and cause broken needle in the print head), and then clean it with the cleaning kit.

7: Please do not reuse the cleaning card: After the cleaning card is used once, there is very little detergent on the cleaning card, and the cleaning effect cannot be achieved.

8: Be careful not to damage the print head when opening or closing the case cover.

9: Do not carry hard objects such as watches and rings when checking the machine, as they are easy to touch and damage the print head.