Evolis & Datacard Cleaning Kit

Posted on November 19, 2022May 5, 2023 by Adminsoft

Evolis & Datacard Cleaning Kit

Using our years of experience selling and servicing card printers, Yousite company has put together a set of printer cleaning kits that work as well as the name-brand kits, but cost a lot less!

The cleaning kit works with several Evolis card printers, including Evolis Tattoo, Pebble, Dualys, Securion, and Quantum printers, as well as Datacard SP and SD printers including Datacard SD260, SD360, SP35, SP55, and SP75 printers.

This printer cleaning kit by Yousite includes:

Evolis & Datacard Cleaning Kit Adhesive Cleaning Cards, Snap Swabs, Pen, and Wipes.

Thermal Printer Cleaning Pen – Use the precise tip on this cleaning pen to remove ink and contamination buildup on your thermal printhead.
Snap Swabs – Featuring spatula foam tips and a plastic reservoir filled with isopropyl alcohol, these swabs thoroughly clean your printhead.
IPA Cleaning Cards – Coated with isopropyl alcohol, these cards should be run through your card printer every 1,000 card prints to remove dust and debris from your card transport rollers, clearing your print path.
Wipes – Pre-saturated with cleaning fluid, these wipes remove debris from your paint rollers.

		Wide Adhesive Card support machine models: JVC series card printers such as CX320/CX330, CX7000, XID8300, UV900, XID9300, 580ie; Prima4, etc.
		Small cleaning card Supported machine models: Zebra’s P310, P420, P330i/P430i (need to be used with large cards); DataCard’s SP35, SP30 series card printers; Evolis’ pebble3/pebble4 series card printers; Magacard’s various card types printer.
		Long cleaning card Supported machine models: Zebra’s P330i/P430i (need to be used with short cleaning cards) and other ZXP series card printers; MagaCard’s Enduro, Rio Pro series card printers.
		Long adhesive card Supported machine models: Fargo HDP5000, HDP600, C30e, DTC, Evolis series card printers.
Adhesive Cleaning Rollers		Cleaning Rollers Used for Zebra P series card printer cleaning wheel; special cleaning wheel for MAgCard; special cleaning wheel (cleaning roller) for DataCard.
		Advanced Cleaning Kit (full printer cleaning) Presaturated T-cards, laminated cards, cleaning pens, presaturated cleaning wipes for the new Evolis card printers Zenius, Primacy and Elypso.

How to Clean Card Reader

Posted on October 19, 2022May 5, 2023 by Adminsoft

Card Reader card machines are designed to extract and decipher your account information contained in the magnetic stripe on your card. The mag stripe reader can become too dirty to accurately read the information, resulting in lost time from having to key the information in by hand. Plus, each card that must be keyed into the system costs the business more to process. To keep sales up and costs down, it is imperative to keep the mag strip reader on a credit card machine clean. Here’s how.

How to clean a card reader?

The cleaning and maintenance of a credit card reader are recommended by the equipment manufacturer to keep the reader in good working order and to prolong the life of the device if done properly and regularly. Your credit card readers come in all shapes and sizes, but they typically have the same type of unit inside the swipe area that has a magnetic head in the care pathway. You can use a Yousite Cleaning Card to swipe the card reader a few times. If your device integrates a smart card reader, you can insert the Cleaning Card into the slot a few times. Wait one minute to let the IPA dry, then your card reader is ready to work.

Supplies & Materials Needed

Here is a complete list of all the supplies and materials you’ll need to clean your Card Reader:

Card reader cleaning card;
Alcohol-based cleaning wipes or cleaners;

Credit Card Reader Cleaning Steps

How to clean a credit card reader

step 1.

Obtain a cloth free of lint and oil. Making sure that you are using the right cleaning medium is a must for getting the best results. The best cleaning medium to use is a chamois cloth or dollar bill or a premade cleaning card.

step 2.

Wrap the cleaning cloth around a credit card. Remove a credit or debit card from your wallet, and wrap the chamois cloth or dollar bill around the card so that it completely covers the front and rear surface of the card with a single layer of cloth.

step 3.

Swipe the card back and forth gently through the reader. Simply slide the card back and forth through the mag reader slot several times as though you were processing a credit sale. Do not push more vigorously or too quickly, or you might damage the reader.

step 4.

Attempt to run a sale transaction. See if the reader will now recognize the information on the back of your card. If not, repeat the process, except add a very small amount of isopropyl alcohol to the cloth. The reader may be dirtier than you think.

step 5.

Get a replacement. If this technique fails, the odds are you have a defective unit that must be replaced. Contact your merchant account provider for a new unit.

what to clean?

CR80 cleaning card is a common cleaning product in the industry.

cr80 cleaning card

The cleaning card can not only be widely used in various types of card printers and card inlets of pose machines, but also can be used in the hotel door system.

Cleaning of IC card refueling machines, automatic ticket machines, etc., have a wide range of uses, and this kind of cleaning card is simple and easy to use, easy to operate, high cleaning effect, and can effectively remove the magnetic stripe of the machine equipment card reader The dust on the surface is dirty, reducing the frequency of equipment failure and prolonging the service life of the machine.

How to use: Tear open the notch of the packaging bag, take out the cleaning card, insert it into the slot of the card reader, and then enter the automatic cleaning state;

Application range: all card readers, card printers, ATM/POS terminals, key card readers, etc.;

Why Clean?

Cleaning your Card Reader is one of the most important steps you can take to protect your printer from damage – it removes dirt, dust, and debris that could harm the sensitive electronics and moving parts within the printer. Cleaning your point-of-sale and self-checkout hardware regularly can help protect your employees and customers from contracting contagious diseases and keep them from spreading these diseases to their loved ones when they leave the store. And it can save you money since printer repairs can be costly and take time.

Protect your customers from any possible infections;
Protect and improve your business image, as no one wants to touch dirty card readers;
No one wants to touch dirty card readers.
Keep your employees healthy and less likely to take days off;
Provide your customers with a safe shopping experience;
Extend the lifespan of your POS equipment;
Prevent cross-contamination among all of your customer-facing terminals and other shared physical touchpoints between your employees and your customers;
Contribute to the fight against COVID-19;
Increase the performance of your POS equipment, especially when debris and grease slower or impact its use;

Evolis Badgy100 Card Printer Cleaning

Posted on October 11, 2022February 11, 2023 by Adminsoft

The Evolis Badgy100 card printer prompts for cleaning.

Recently, a customer consulted. The Badgy100 card printer cannot print normally during use.

The monitor program of the printer prompts for cleaning (as shown in the figure below).

Use the cleaning card to clean the printer in time.

The regular cleaning and maintenance of the machine is conducive to the normal use of the printer.

If it is not cleaned in time, the printer may not be able to work normally!

Printer print head with cleaning swabs; The card printer itself with pre-saturated cleaning cards; The cleaning rollers with pre-saturated cleaning lint-free wipes.

How Long To Clean A Card Printer?

Posted on September 19, 2022September 9, 2024 by Adminsoft

Now too many places are using the card printer, we ride the subway card when we go to the bank to withdraw money into the bank card, go to a copy shop to print something, we usually use the machine ID card, Medicare card, bus card, is a card printing machine made. So the use of the card printer friend, how often should clean a card printer?
When the card is produced, the card will inevitably with dust, after the delivery rollers transmission, the dust will remain in other parts of the transfer rollers and printer, resulting in production out of the card quality that can not be achieved. In order to solve this problem, we produce a card printer cleaning card that can be applied to different card printers, especially our cleaner production CR80 card, use range is the most extensive. As long as the card appears with fuzzy signs or the printer is not working, this time the need to take the clean clean printer.

How long to clean a card printer?

The print head should be cleaned after every 250 copies of the printer or after changing the ribbon to ensure the printing quality.

In card printer systems, the card printer is the key terminal device.

Through the background program setting, the card printer can print personal information such as portrait photos, names, and units on the card surface, which can be used as identity confirmation and realize various smart application functions. The daily cleaning of the card printer is the key to ensuring its service life, which should be our great attention.

1. Types of cleaning tools

ID Printer Cleaning Kit

2. Use of Cleaning Tools

To make your card printer work better, perform maintenance and cleaning after each roll of ribbon or 250 pages of printing. The tools in your cleaning kit can help you complete standard cleaning routines more efficiently and thoroughly. Please clean the printer properly according to the following methods. The whole cleaning process only takes a few minutes.

• Cleaning pens soaked in 99.99% acetone alcohol.
•The cleaning card is used to clean the inside of the machine and the cleaning wheels.
• Cleaning gauze soaked in 99.99% isopropyl alcohol is used to clean the transfer rollers inside the machine.

How to clean the print head

Cleaning items Use: Cleaning pen

IPA cleaning pens are a reusable option for cleaning thermal printheads, and each pen can be used 6 to 10 times.

Have you noticed an unprinted line on your print card, if so, it’s time to clean your print head.

The print head should be cleaned after every 250 copies of the printer to ensure the printing quality.

1: Open the top cover of the printer.
2: Use the print head cleaning pen to gently wipe the glass body of the print head several times to remove the dust accumulated on the print head.
3: Close the top cover of the printer after cleaning. If the line persists, check the manual for further cleaning of the printer head.

Cleaning method of driving rollers

DataCard 557668-001 - Retransfer Printer Adhesive Card

Cleaning item usage: Cleaning card YST-ACC-D 85×150 mm

After printing 250 cards, all driving rollers needs to be cleaned once.

1: Remove the ribbon and card from the printer. This cleaning program also keeps the cleaning wheels clean.
2: Open the top cover of the machine.
3.: Peel off a thin layer of paper on the cleaning card.
4: Press the “Diapause/Resume” or “Open/Cancel” button and insert the clean card from the entry slot (adhesive side up). Push the card into the machine as far as it will go until the card is fed into the machine. If the cleaning card is face down, it will stick to the paper tray and will not get inside the machine.
5: Keep pressing the ON/CANCEL button until the cleaning card passes through the printer. Repeat this cleaning process if necessary.

Cleaning method of the pressure rollers.

Cleaning items use: cleaning wipes

The printer pressure rollers should be cleaned after printing each roll or 250 cards, if the surface of the printer pressure rollers looks dirty, the surface of the printer pressure wheel should be cleaned in time. Follow the steps below to clean the printer cleaning rollers.

1: Open the top cover of the printer.
2: Remove the ribbon (and transfer the film).
3: Locate the pressure rollers.
4: When cleaning, press on/cancel (on/off) or pause/resume (online) to rotate the pressure wheel and wipe it with a clean wipe.
5: Wait for the pressure rollers to dry and install the ribbon.

Maintenance cleaning of the cleaning rollers.

Long T cleaning card, adhesive cards, cleaning swabs,Cleaning pens and cleaning wipes. Yousite – Manufacturer of high-quality card printer cleaning kits.

Put the cleaning rollers into the printer, the cleaning rollers will absorb the dust particles on the card when printing, thus prolonging the life of the print head and improving the quality of the punched card.
Pay attention to whether there are a lot of dust particles on the cleaning wheel, or wash it after every 250 cards are printed.
Note your printer model. It may have one or two cleaning wheels.

1: Open the top cover of the machine.
2: Remove the ribbon and printer cleaning roller from the printer.
3: Locate and remove the cleaning wheel between the two belt drive wheels.
4: Tear off a thin layer of paper from the cleaning card, and stick the cleaning card on the drag cleaning card with the cleaning wheel turned over, so that the dirt and dust on the cleaning wheel are adsorbed on the cleaning card.

Card Reader Cleaning Card Kits

Posted on April 12, 2022May 5, 2023 by Adminsoft

Yousite company card reader cleaning card set

Yousite company card reader cleaning card is a cleaning card product specially designed to clean the magnetic strips inside various card readers.

Nowadays, various mobile ATMs and large supermarkets have credit card machines and related magnetic card reading devices, which bring great convenience to our daily trading and financial activities. But maintenance of any device after use is crucial.

It will not cause corrosion or damage to the magnetic strip inside the card reader. Wear and tear will affect the service life of the instrument. At the same time, the Yousite card reader machine cleaning card is easy to use, just open the package, insert the ATM cleaning card soaked in solvent into the ATM or poss machine multiple times, and it can be cleaned and used many times.

Professional card printer cleaning kit manufacturer

Yousite company is a professional manufacturer of card printer cleaning kits, especially brand card printer compatible cleaning kits: Zebra, Evolis, Datacard, Fargo, Magicard, etc.

The cleaning kit includes: cleaning cards, cleaning swabs, cleaning wipes, cleaning pens, sticky cleaning cards, sticky cleaning rollers, and more.

Choose suitable cleaning products according to the brand, model and style of the machine. If you are not sure what products to use on your machine, just contact us and we will tell you which cleaning products to use and how to use them. We have rich experience and technology, so you can’t go wrong choosing us.

Label, Receipt and Barcode Printer Cleaning Card/Kits

Posted on February 5, 2022December 5, 2022 by Adminsoft

Cleaning Cards/Kits | Label, receipt and barcode printer cleaning card

Whether you utilize paper, linerless labels, or linered label rolls in your printer, a routine cleansing timetable is the very best means to make certain optimal printer performance and print high quality.
Yousite cleansing products will certainly: Eliminate glue residue, dust as well as various other contaminates that can create label jams and cause printer element damage Prolong the life of the thermal printhead and also rollers Keep your published picture looking clean and crisp Cleans printhead, paper guides and paper path
Select from our:

Remove dust, debris and oils that build up over time during the normal operation of your remote deposit check scanner. Check Scanner Cleaning Kit

Expert Cleaning Package Cleaning Cards

Regular cleaning with Yousite Materials can substantially prolong printhead life. View the return on your investment expand with these user friendly regular maintenance items.

Zebra Barcode Printer Cannot Print

Posted on January 11, 2022February 11, 2023 by Adminsoft

Zebra Barcode Printer Cannot Print

When we use Zebra in the barcode printer, there is often no response failure after pressing the print button, so how should we deal with this situation?

Many friends who are not familiar with printers may think that the printer is broken, but this is not the case. The following examples are the common faults that Zebra barcode printers cannot print. Take this as an example and hope it will be helpful to everyone.

1. One of the most common failures of Zebra barcode printers is that the printer reports an error, and there will be various prompts on it, such as RIBBONOUT and PAPEROUT waiting on the panel.

The problem with this is that you cannot measure paper and ribbon failure. When this problem occurs, the first thing you want to do is to see if the label and ribbon are installed correctly. If it still doesn’t work after eliminating the above problems, then the Zebra barcode printer should perform advanced calibration on the label. If it still doesn’t work, you can restore the factory settings of the printer after knowing the printer parameter settings.

After the above method is used, the error is still reported, which is estimated to be a hardware problem. Please check whether there is dust on the label sensor and ribbon sensor, which can be cleaned with denatured alcohol. If this method still does not work, it is estimated that the main board of the barcode printer is broken.

2. The second common failure of the Zebra barcode printer is that the printer does not respond after printing, and there is no prompt on the printer screen. It is normal to feed the paper after pressing the paper button, which means that the printer does not report an error and the printer is good, and then the computer interface and data cable. If these two faults are excluded, the motherboard of the barcode printer will definitely be broken.

3. The third common failure of Zebra barcode printers is that the printer does not light up, the backlight of the screen is on, and the others do not respond. In our professional terminology, the main board does not light up. The only reason for the failure is that the chip on the main board of the printer is burned or short-circuited. The printer power board was working, so it was determined that the main board was bad.

4. The fourth common fault of Zebra barcode printers is that the printer does not light up, and the screen is completely black. The fault is that the power board is broken, and only one power board is shorted.

Madica M315S card printer cleaning

Posted on November 11, 2021February 11, 2023 by Adminsoft

Madica M315S card printer cleaning and maintenance

In order to better maintain the machine, please clean the machine in time.

Use a cleaning card to clean the color ribbon after a roll of ribbon is used up.

Clean the black belt with a cleaning card in time after printing 500 cards. If the machine is used in a dusty environment, it is recommended to increase the frequency of cleaning with the cleaning card.

1. Use a cleaning pen to clean the print head of the machine when the power is off.

2. The blue cleaning wheel rubber roller in the machine can be taken out frequently and rinsed on the faucet. After the water stains are dry, put it back into the machine. Note that the cleaning wheel rubber roller must be pressed down in place.

3. Use of machine cleaning card :

1) Take out the card from the card feeding box of the machine, take out the ribbon and cover the machine cover.

2) Press and hold the two buttons EJECT and RIBBON SET on the machine panel at the same time to enter the machine menu page: (EJECT on the machine panel: short press – move up, long press – exit or return to the previous level RIBBON SET: short press – move down, long press – confirm or enter the next level)

3) Long press RIBBON SET to enter the menu

4) Select 1.DIAGNOSIS, long press RIBBON SET to enter

5) Unpack the cleaning card, put the cleaning card into the card slot, select 2.CLEAN MODE and press RIBBON SET for a long time to confirm, the machine will clean automatically. (If the cleaning card is cleaned once, you can continue to clean it several times. When the cleaning solution on the cleaning card dries up, the cleaning card can no longer be used, and a new cleaning card needs to be replaced).

T Cleaning Cards for Evolis Printers

Posted on October 3, 2021December 3, 2022 by Adminsoft

T Cleaning Cards for Evolis Printers

Compatible Evolis Primacy card printer cleaning card

Product type: T-shaped long cleaning card, short sticky card, long sticky card

Model code: T-shaped long cleaning card (ACL004), adhesive cleaning card (ACL003), long adhesive cleaning (A5070)

Description: T-shaped long cleaning card (54x326mm), adhesive cleaning cards 54 x 90mm, long adhesive cleaning (54x170mm)

Scope of application: cleaning the card passage of the printer

EVOLIS includes T-Cards for deep cleaning the card transport rollers on Evolis Zenius and Primacy printers.

Keeping your Evolis printer clean saves you money by extending the life of your print head and other moving parts.

Fortunately, proper maintenance of your Evolis printer takes very little time.

Evolis Cleaning Kit contains T-Cards and works with Evolis Zenius and Primacy card printers during deep cleaning cycles.

Product functions and features

1. Can effectively clean and maintain equipment
2. Removing dirt can reduce the read failure of the device
3. Simple operation, economical and effective

Yousite is a direct manufacturer of card printer cleaning kits, and the products can completely replace the original products. Not only the product price is low and the quality is high, but it can also reduce the transportation cost. Everything is based on the interests of customers. As long as there is a need, we will try our best to satisfy you. Yousite only makes high-quality products!

Transport Rollers Cleaning Card

Posted on August 19, 2021May 5, 2023 by Adminsoft

Transport Rollers Cleaning Card

For use with all Evolis card printers · For the cleaning of card transport rollers · Pre-saturated cleaning cards packaged in an individual tear-open pouch.
The subway is a city’s emerging traffic tool, carrying millions of flows daily. Subway cards as carrier material to take the subway, which greatly improves the convenience of people’s travel. However, due to the metro card carrying a lot of dust, the credit card for a long time will cause the card slot card the accumulation of large amounts of dust, affecting the efficiency of a passenger car.

Regular maintenance costs for maintaining Evolis card printers. Keeping the printer transfer rollers clean can help improve print quality.

These double-sided pre-saturated Card Cleaning Cards are designed to safely remove all forms of dust, lint, magnetic oxides, and other contaminants that build up on magnetic and optic reader heads. They safely and effectively clean all types of concealed heads, photo, and optic sensors on mechanisms.

Facing this problem, how to solve it?

Yousite’s cleaning card can easily dispose of this puzzle. We are specializing in the production of cleaning cards, cleaning swabs, and cleaning kit manufacturers, for the subway card slot that is easy to dirty, and we are also through continuous testing, making our cleaning cards more easily, and more suitable for all subway stations. When the cleaning card slot is, you can first use our cleaning card clean, and then use a clean foam swab to erase the dust around the corner. If some induction card readers, don’t put try our cleaning cloth, the effect is very good.
In addition, ticket machines, and vending machines in the subway is also can clean our products, if there are good cooperation intentions, may wish to discuss cooperation with Yousite. technology!