Home » Printhead Cleaning Swabs » Page 2

How to Clean a Credit Card Reader & Thermal Printer?

Posted on January 16, 2023May 5, 2023 by Adminsoft

In card printer systems, the card printer is the key terminal device. Through the background program setting, the card printer can print personal information such as portrait photos, names, and units on the card surface, which can be used as identity confirmation and realize various smart application functions. The daily cleaning of the card printer is the key to ensure its service life, which should be our great attention.

Use of cleaning kits

To keep your card printer working best, perform a maintenance cleaning after every roll of ribbon or 250 pages printed. The kits in the cleaning kit can help you complete standard cleaning routines more efficiently and thoroughly. Please clean the printer properly according to the following methods. The whole cleaning process only takes a few minutes.

Cleaning pens soaked in 99.99% acetone alcohol .
The cleaning card is used to clean the inside of the machine and the cleaning rollers.
Cleaning wipes soaked in 99.99% isopropyl alcohol are used to clean the conveyor rollers inside the machine.

How to clean the print head?

Printhead cleaning pen contains Isopropanol alcohol proven to effectively clean the printhead from dirt, ink, and other contaminants that have built up over time.

Have you noticed an unprinted line on your print card, if so, it’s time to clean your print head.

We should clean the print head after every 250 prints of the printer to ensure the print quality.

1: Open the top cover of the printer.
2: Use the print head cleaning pen to gently wipe the glass body of the print head several times, wipe left and right. To remove dust accumulated on the print head.
3: When the print head is completely dry, the job of cleaning the print head is finished.

How to clean the pressure roller?

Preventative maintenance of card printers and transactional equipment to clean the thermal printheads, transfer rollers, and internal components of the equipment.

The printer prerol should be cleaned after printing each roll or 250 cards, if the surface of the printer pressure wheel looks dirty, the surface of the printer pressure wheel should be cleaned in time. Follow the steps below to clean the printer pressure rollers.

Open the card, remove the card, and find the card’s two drive rollers.
Remove the ribbon (and transfer film).
Find the pressure rollers.
Use the cleaning wipes from the cleaning bag to clean the two drive rollers in the printer card magazine.
When cleaning, press ON/CANCEL (on/off) or pause/resume (online) to rotate the pressure wheel and wipe with a clean gauze.
Wait for the pressure wheel to dry and load the ribbon.
After cleaning all drive rollers, close all chassis covers.

Maintaining the Cleanliness of the Cleaning rollers?

Compatible Cleaning Kit Contains Adhesive cards – 85x150mm, 10 Cleaning Swabs, 10 Cleaning wipes. Magicard Prima Cleaning Kit.

Put the cleaning rollers into the printer, the cleaning wheel will absorb the dust particles on the card during printing, thus prolonging the life of the print head and improving the quality of the punched card.
Pay attention to whether there are a lot of dust particles on the cleaning wheel, or wash it after every 250 cards are printed.
Note your printer model. It may have one or two cleaning rollers.

1: Open the top cover of the machine.
2: Remove the ribbon and printer cleaning roller from the printer.
3: Locate and remove the cleaning wheel between the two belt drive rollers.
4: Tear off a thin layer of paper from the cleaning card, and stick the cleaning card on the drag cleaning card with the cleaning wheel turned over, so that the dirt and dust on the cleaning wheel are adsorbed on the cleaning card.

What are the benefits of regular printer maintenance?

1. Best performance

A clean printer leads to optimal efficiency and performance. As a by-product of normal printing, printers often accumulate residue (consumable dust, adhesives, etc.). Regular cleaning of your Credit Card Reader or ID printer can help prevent poor quality issues and can increase productivity by limiting the number of interruptions to your workflow. Likewise, the printer itself will perform optimally when the thermal/thermal transfer printhead has a clean and clear label output path.

2. Save maintenance cost

When your printers are clean, they are less likely to malfunction. Ensuring that the printheads and hardware inside the printer are clean saves critical time and money from being wasted without costly replacements and time-consuming integration into a new printer.

3. Extend the life of the printer

Credit Card Reader printers are built to last. Regular cleaning routines help extend the life of mission-critical equipment by ensuring that hardware and its vital accessories are free of debris and particles that can accelerate wear.

4. Print clear and readable labels

When a barcode verification detector or handheld scanner is running, dust under the printhead can cause barcodes to fail or scan incorrectly. Cleaning the printer hardware will help prevent labels from being voided and incorrectly reprinted. A clean printer also prevents barcodes from not scanning properly due to dust under the printhead. Reducing the chances of these bad barcodes being shipped out can help prevent large fines later imposed by consignees for deliveries.

5. Reduced need for maintenance

Minimize business disruption by cleaning your printers on a regular basis. When printers are clean and running at maximum capacity, mission-critical equipment is working hard to maximize revenue. When a printer fails, every minute of failure affects your bottom line. In the event of a printer failure, your main concern is minimizing downtime.

Regular cleaning of your printer will not only help your printer last longer, it will also ensure that your labels are always legible.

ID Card Printer Cleaning Kits

Posted on December 31, 2022December 31, 2022 by Adminsoft

How to use card printer cleaning card

1. Required cleaning tools 1. Cleaning card. 2. Cleaning swab. 3. Cleaning rubber wheel

2. Use of cleaning tools 1. First open the printer and take out the ribbon.

2. Tear off the packing bag and put the cleaning card into the card input box of the printer.

3. Open the card printer driver’s properties -> device settings.

4. Select the Tools tab, click Printer <br>6. Take out the cleaning cotton swab, squeeze the stick of the cotton swab, and let the liquid flow out to the head of the cotton swab.

7. Use a cotton swab to gently wipe the print head of the printer (wipe in one direction).

8. Wait for the liquid to dry and the body cleaning is complete. 3. Replace the cleaning rubber wheel. It’s roughly like this. If you want to see a specific and clear introduction, you can go to Beijing Fagao Sunshine. They have a clear explanation of the card machine with pictures, which is very clear and easy to understand.

Card Printer Tutorial

If you want to print hard cards, you may need a dedicated card printer to print hard cards.

In the all-in-one card system, the card printer is the key terminal equipment.The daily cleaning of the card printer is the key to ensuring its service life, so extra care should be taken.

1. Cleaning tools

The cleaning tools for card printers include cleaning cards and cleaning swabs.

2. Use of cleaning tools

When cleaning the card printer, first open the printer to take out the color ribbon, then tear off the packaging bag, and put the cleaning card into the card input box of the printer. Open the printing preferences of the card printer driver, select the Tools tab, and click the Printer Self Cleaning button to clean. The card is automatically ejected after cleaning is completed.

Take out the cleaning swab, squeeze the stick of the cotton swab, and let the liquid flow out to the head of the cotton swab. Use a cotton swab to gently wipe the printer’s print head (wipe in one direction). Wait for the liquid to dry and the cleaning is complete.

How does the printer swipe the card to print?

Bank card swiping records can be printed in the bank. Supplement: If you have opened telephone banking service, you can also complete it through telephone consultation.

How to use the card printer

CX330 card printer consumables have a number of sheets. One set can print 1,000 single-sided cards. In fact, the number of printed cards may be less than 1,000, so budget your own consumables according to your punching volume.

How to clean the card printer

1. Make sure that the power of our printer is turned on.

2. Go back to the computer connected to the printer and click the “Start” menu on the desktop. Then you can see the “Devices and Printers” option in the start menu, click it.

3. After entering the device interface, we can see our printer. Find the printer we want to clean and click the right mouse button, you can see “Printer Properties” in the pop-up menu bar, click it.

4. After entering the printer properties interface, we can find the “Maintenance” option in the interface and click it.

5. In the maintenance interface, we can see the “cleaning” option, click it.

6. After that, an interface will pop up, click the “Execute” option in it.

7. Finally, an interface will pop up saying that our printer is cleaning, just click OK.

How to use the printer cleaning card

1. Click Start in the lower left corner of the computer. Select Printers and Devices, select the printer driver icon, and what you need to click here is Printing Preferences.

How to use the card printer cleaning card

1. Ribbon deviation occurs during printing

The main reason is that the platen spring is uneven and the paper limiter is not adjusted according to the width of the label, not because of the poor quality of the ribbon cutting.

2. The printing is not clear and the quality is poor

There may be the following reasons:

1. The temperature of the print head is too low or the print density is too light. 2. The print head is not installed correctly

3. There is always a shallow thin line on the label printed by the printer

If your printer has such a problem, it proves that you have not done enough to maintain the printer.

When there are one or several lines running through the entire card, the most likely reason is that your print head is damaged. The reason for such a problem is that there are large dust particles on the card surface or in your machine, which causes the print head to come into contact with the dust particles while punching the card, thus scratching the print head.

If the printer punches a card and there is a large area of the card that is not printed, there are two possibilities: 1. The print head is seriously damaged. 2. The data cable of the print head is damaged. If this happens to your printer, please contact our engineers to confirm the damaged part and repair method.

The damage of the print head is irreparable. In this case, only a new print head can be replaced.

The way to avoid this situation is: 1. Pay attention to cleaning the printer regularly. 2. Pay attention to the cleanliness of the card surface (check for abnormal protrusions). 3. Be careful not to touch the print head when opening or closing the case cover. 4. When checking the machine, do not carry watches, rings and other objects that are easy to touch the print head (note static electricity).

If your print head is damaged, you will need to purchase a new print head to replace it.

4. Occasionally, some spots will appear on the label printed by the printer

If there are some spots on your printed cards, it is because your printer has accumulated dust and needs to be cleaned in time. It is recommended that you use special cleaning tools when cleaning, which can well protect the printer from damage.

If your printer is not cleaned for a long time, there will be some large dust particles inside the printer, which will scratch your print head when you punch the card, causing irreparable damage to the print head.

The working principle of the card printer is the same. When punching the card, keep the card surface neat and clean (it is best to wipe each card with an eye cloth before printing), so that the printed card will not be flawed.

5. How to solve the problem of ribbon wrinkling

Reason:

1 Ribbon is not properly wrapped around the machine
2 Temperature setting is incorrect
3 Printhead pressure and balance are not set correctly
4 Media is not set correctly for feed

Solution:

1 Reinstall the medium correctly
2 Adjust the printing temperature to meet the printing requirements as much as possible
3 Reset the minimum pressure required for printing
4 Reset the correct paper feeding amount of the medium

6. Why does the ribbon “stick” to the cloth label?

When the barcode machine is printing the cloth label (tape), some types of barcode machines will have the carbon tape and the cloth label stick together.

The thermal transfer barcode machine is like a hot stamping machine, except that the hot stamping machine uses gold paper, while the barcode machine uses carbon ribbons.

After clarifying this relationship, we can lower the temperature of the hot spot of the printing hair of the bar code machine or reduce the pressure of the printing head, which can prevent the ribbon from sticking to the cloth label, but sometimes this method is not It is suitable for any barcode machine (low-end barcode machine).

The most thorough way is to change to an industrial barcode machine with better performance. This kind of barcode machine will not appear in this situation when printing. In addition, if you really don’t want to change it, you can also put the barcode machine in an air-conditioned room. This will improve the situation. Some customers say the conditions are better in winter than in summer! Maybe it’s the ambient temperature.

How to clear paper jams in home laser printers

1. First, take the most common HP laser printer as an example.

2. There is only one case of paper jam in this machine, that is, the toner cartridge is jammed. This machine is opened on the cover, you can see the toner cartridge by opening the cover first.

3. Grasp the handle on the toner cartridge and pull it up, and you can take out the toner cartridge with a little force. After taking out the jammed paper, put the toner cartridge back as it was, and press it when you hear a “click”.

All-in-one paper jam solution:

1. Secondly, take the Samsung laser all-in-one machine as an example. This machine supports printing, copying, scanning, and faxing, and its structure is a little more complicated.

2. There are two places where this machine is prone to paper jams.

3. In addition, the paper feed wheel at the rear of this machine often jams paper. The rear cover needs to be opened, because the wheels are very hot, so use a sharp tool such as a pen to pick out the jammed paper from the wheels.

Basically, many mobile phone cases with patterns now use UV printers. I just bought one last month for an A4uv printer to print products that are about the size of a mobile phone case. I went to Zhejiang to see 2 uv printers, tested the effect on the spot, and then bought one according to the price and brought it back with me. The price is less than ten thousand. From the point of view of printing clarity and effect, it is not bad. Therefore, it is recommended that if it is used to print mobile phone cases, an A4 uv printer is fine, and the price is not bad, so there is no problem in printing. When buying, compare two or three companies, and choose after comprehensive consideration.

How the Printer Clears Paper Jams

We should pay more attention to regularly checking the components of the printer, and doing a good job of cleaning, ventilation and paper selection. Only in this way can paper jams be avoided, and the service life of the printer be extended so that it can serve us better.

1. Paper jams in the printer. Continuous paper jams often occur. You can first check whether the printing paper is damp and sticky between the papers. When printing, two or more papers will come out at the same time, causing the printer to jam. You can rub the printing paper apart to keep the paper from sticking together.

3. When there is a problem with the toner cartridge, it will also cause paper jams in the printer. You can open the toner cartridge and look carefully. If there is a problem with the roller of the toner cartridge, replace it with a new toner cartridge, so that paper jams will not occur frequently.

5. Sometimes the roller of the paper outlet of the printer will cause the printer to jam. You can use absorbent paper to dip some water to clean the roller to avoid printer jam.

6. Next, hold the toner cartridge flat and push it flat into the printer, as shown in the figure below, to test whether there is a paper jam.

7. Finally, cancel the printed file, press the cancel button on the printer, and resend the file for printing. At this time, the paper will not be jammed. The printer has been used for a long time and needs frequent maintenance to avoid frequent paper jams.

IPA Alcohol Cleaning Swab

Posted on December 12, 2022December 12, 2022 by Adminsoft

Printer Cleaning Swabs

Now many corporate offices have barcode printers, but usually they forget to maintain our barcode printers. The maintenance of barcode printers is very necessary. Doing a good job in daily maintenance will make our barcode printers work more efficiently. Use it for longer! Today, the editor will take you to take a look at the cleaning method of the barcode printer.

1. Clean the paper feed guide of the barcode printer Generally, there will be no major problems in the paper feed guide of the barcode printer, but sometimes the label is stuck in the guide groove due to man-made or label quality problems, so it is necessary to clean the guide groove in time , When cleaning, just pull it out by hand.

IPA Alcohol Cleaning Swab

2. Cleaning of the print head of the barcode printer

We need to clean the print head of the barcode printer regularly. And the tools only need cleaning swabs or cleaand alcohol. When cleaning the print head of the bar code printer, pay attention to turn off the power of the bar code printer first, turn up the print head, remove the ribbon and label paper, and wipe the print head lightly with a swab (IPA Alcohol Cleaning Swab) soaked in the print head cleaning solution. until clean, then gently dry the print head with a clean swab. Note that when we wipe the print head, try to keep it in the opposite direction. Keeping the barcode print head clean can get a good printing effect, and most importantly, it can prolong the life of the print head.

3. Cleaning of sensors in barcode printers

The main purpose of cleaning the sensor is to allow the machine to function properly without any paper errors or ribbon errors. If it is not cleaned and maintained for a long time, the dust scattered in the air will be deposited on the sensor. After a long time, when the light source of the sensor is covered to a certain extent, the machine will malfunction. The cleaning tools and methods are similar to those of the print head.

4. Clean the drive system of the barcode printer

Because the general label paper is self-adhesive, its glue is easy to stick to the shaft and channel of the transmission. And there is dust, which directly affects the printing effect. So it needs to be cleaned frequently. Usually once a week, the method is to use alcohol-soaked swabs or IPA Cleaning Wipes to scrub the shafts of the drive, the surface of the channel, and the dust in the chassis, and then wipe dry with a clean swab or IPA Cleaning Wipes .

The above content is the cleaning parts and cleaning methods of the barcode printer. I hope it will be helpful to everyone. If you have other questions, you are welcome to contact us at any time. We Mingtu Enterprise purchases office furniture, office supplies, office equipment, etc. , has more than ten years of purchasing experience, providing one-on-one customer service, welcome to consult~

Zebra Card Printer Cleaning Kits Manufacturer Directly Sale

Posted on December 7, 2022December 7, 2022 by Adminsoft

Manufacturer Directly Sale Zebra Card Printer Cleaning Kits

Use the Zebra Cleaning Kit to keep the inside of your Zebra printer free of dried up ink and debris that clogs the printheads. Which will extend the life of your printer.

Detail Description

Zebra printer cleaning cartridges, rollers, cards and swabs extend the life of your card printers and improve overall image quality.

Characteristics

Printhead—the most important and most expensive part in a card printer. Needs regular maintenance.

Compatible Zebra Cleaning Kits is specially designed to clean the printhead debris, the barrel is filled with IPA solution, it can be used for about 10 times for cleaning the printhead.

For applications on electronic printed circuit card (PCB) components, we use isopropyl alcohol to clean flux residues from PCB repair work and remodeling.

If the printer print head is hidden inside the printer, you can use a cleaning swab as the handle is more flexible.

used on most of Zebra card printers.

Zebra Clean Print Head pen

Applications

Zebra Cleaning Kits 105999-310 and 105999-311 is specially used for removing the residue built up on the card printer print head, it can be used on Zebra card printers ZC100&ZC300 series.

Compatible Zebra cleaning kit provides an easy and inexpensive option to maintain the performance and functionality of your ID card printer.

Zebra Card Feed Hopper Short T Cleaning Card. To clean the card feed hopper on Zebra ZXP1, ZXP3 card printers.

Simply insert the card feeder cleaning card into the card slot and run the cleaning cycle. Turn the cleaning card over and repeat the cleaning cycle again. And the printer is ready to use when cleaning is complete.

Our card feeder short T cleaning cards laminated with PVC and polyester wood pulp composite cloth. Which has excellent water absorption and toughness. And the wood pulp can absorb IPA solution to slow down the evaporation time.

Card Printer Alcohol Cleaning Swab

Posted on December 6, 2022December 6, 2022 by Adminsoft

Fargo Card Printer Alcohol Cleaning Swab

IPA snap swab that has been specially designed for cleaning dirt, oils, magnetic oxides, lotions, and other contaminants from the printheads.

Specifications

.Sterile Swabs;

.Clean the termal printhead;

. 4.5″ handle with IPA filled;

.free sample;

.OEM available;

Fargo card printer alcohol cleaning swab , 4.5” IPA Filled Reservoir Handle, 25/box;

YOUSITE TDS IPA Snap Swab 4.5

Fargo Print Head Cleaning Swabs is easy, self-saturating foamtipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.

Cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.

To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.

The user then runs the swab over the print head until it is clean.

Datacard/Fargo/DNP Compatible Adhesive Cleaning Card

Posted on December 6, 2022May 5, 2023 by Adminsoft

Datacard/Fargo/DNP Compatible Adhesive Cleaning Card
Specifications

This Presaturated ATM/Card reader Cleaning Card is designed to safely and effectively remove all dirt, magnetic oxides, oils, lotions,…

Adhesive Cleaning Card

Yousite Evolis Card Printer Cleaning Kit YST-ACL003 is compatible with Evolis ACL003 Cleaning Kit. For Cleaning Roller (50 Adhesive Cards)

1.Used for Datacard,Fargo,Zebra ZXP3/DNP Card Printers
2.Good Quality and Competitive price

Adhesive Cleaning Card

Description:
Card Readers require preventative maintenance for keeping the Magnetic Heads clean
and debris free from contamination build up.

Pre-saturated Cleaning cards are a cost effective way to maintain your card readers and
increase the service life of the magnetic heads

Features

CR80 is a disposable presurated cleaning card that has been specially designed for removing dirt, magnetic oxides and other contaminants from concealed magnetic heads and optic sensors.

Cleaning Card
-Excellent absorbency than the 100%polyester cleaning card

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.

Electronic-gradeIPA Snap Swab
-Easy,Effective,Safety;

Aluminium Foil
-Strong tightness and keep it longer;

Hot-press compound
-Make sure the most excellent cleaning effect;

Cleaning Wipes kit removes any dust to maintain excellent image quality, ensuring your ID card printer runs smoothly. Printer cleaning consumables.

Presat IPA wipes
-preventive maintenace for your printer.

Zebra Card Printer Cleaning Card

Posted on December 3, 2022May 5, 2023 by Adminsoft

P330i/P120i/P100i Zebra Card Printer Cleaning Card

P330i Printer Cleaning Tutorial

Needed cleaning tools

The Zebra P330I cleaning kit includes 25 standard cleaning cards (CR80 cleaning cards), and 25 T-size cards (print engine cleaning cards). Zebra 105912-913.

1. Cleaning up card
2. Cleansing IPA swab
3. Cleaning rubber rollers

Adhesive Cleaning Rollers Compatible with Zebra 105912-003 Cleaning Roller Kit, Set of 5 for P310/320/330/420/520/720 Cleaning.

Use of cleaning tools

1. Initially open the printer and also obtain the ribbon.
2. Detach the packing bag and also put the cleaning card into the card input box of the printer.
3. Open the properties of the card printer motorist– >; device setups.
4. Select the Devices tab, and click the Printer Cleaning button to clean.

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to Disinfects small & difficult to reach electronics.

6. Get the cleansing swab, squeeze the cotton bud stick, and let the liquid drain to the head of the cotton swab.
7. Make use of a swab to carefully wipe the print head of the printer (wipe in one direction).
8. Await the liquid to dry and the body cleansing is finished.

Note – Two cleaning cards are needed for the cleaning procedure. A cleansing card coincides in size with a basic plastic card, we call it a “cleaning card”. The various other card is bigger as well as wider at one end, we call it the “Long Cleaning Card“.

Cleaning Process

1. Leave the printer powered on, or transform it on if it is out.

2. You can begin the cleansing procedure with one of the adhering means:
Press and hold the printer’s panel button for a couple of secs up until the message get rid of RIBBONTHEN CLOSE HEAD appears on the LCD.
Go to the P330i Printer Devices software application from your computer system as well as click the CLEAN button. The LCD will certainly show the REMOVE BOW AFTER THAT SHUT HEAD message.

3. Open up the major cover, release the printhead owner, and eliminate the bow. Close the printhead owner. The LCD panel will display the
EMPTY message.

4. Open up the card feeder cover, and afterward remove the card from the card feeder. The last card is tough to get rid of and can be left in the feeder. Press the panel switch on the front of the printer. Cards left in the feeder will be expelled. The LCD panel will certainly display the message tons CLEANSING CARD IN FEEDER.

5. Place the pre-soaked cleaning card right into the card feeder. The cleaning card will immediately be fed right into the printer and the cleaning procedure will certainly begin (there is a hold-up of a few secs after feeding the cleaning card prior to the cleaning step beginning). Throughout cleaning, the LCD will certainly display the message cleansing PRINTER.

6. When this part of the cleansing process is full, the cleaning card will pop out as well as the LCD will certainly present the message PRESS SWITCH TO CONTINUE.

7. After the user presses the panel button, the LCD will certainly show the message FEED LONG CLEANING CARD IN LEAVE. Place the longer end of the lengthy cleansing card into the card leave (located straight over the outcome hopper). When the user inserts a “normal” cleansing card right into the card slot, the LCD will display the INVALID
CARD, PRESS BUTTON message till the individual presses the panel button and also inserts a long card right into the card port.

8. The lengthy cleansing card will be immediately fed right into the printer and also the printing process will begin. The LCD will present the CLEAN PRINTER message once more.

9. When the cleaning procedure is total, the long cleaning card will pop out, and also the LCD will certainly show a READY message, indicating that the printer prepares to resume normal printing procedures.
Note – Two cleansing cards are required for the cleaning process. A cleansing card coincides with size as a general plastic card, we call it a “cleaning card“. The other card is larger as well as broader at one end, we call it the “Long Cleansing Card”.

Keep in mind – If the user does nothing right now (as an example, no lengthy cleansing card put), the LCD will transform to display CLEAN PRINTER after a timeout. The printer can print, however the LCD will remain to display CLEAN PRINTER.
This limited cleaning process does not execute a detailed cleansing. However, it can be done without the “lengthy cleaning card”.
To return the screen to READY, the user is required to perform the complete cleansing procedure from step 2 above with step 9 listed below making use of both lengthy and brief cleaning cards.

10. The cleansing card can just be used as soon as and also must be disposed of after usage.

Product Packaging Information: 25pcs/box.100 boxes/ctn.

Distribution Information:

2-3 weeks for shipment after order confirmation Requirements.

1. Blending polyester, spun shoelace, cellulose, and PVC card.
2. For cleaning impurities from Zebra printers.
3. P330i/P120i/P100i clean.

Description.

The saturated disposable cleaning card: for cleansing effectively dust, magnetic oxides, oils, particles, creams, as well as other pollutants from all kinds of ID card printers, scanners, visitors, and barcodes.

It is an economical way to maintain your card viewers and also boost the life span of the magnetic heads.

IPA SNAP Swabs for Thermal Printer and Card Printer

Posted on November 30, 2022November 30, 2022 by Adminsoft

IPA SNAP Swabs for Thermal Printer and Card Printer

Cleaning snap swabs 4.5” IPA Snap Swab for Cleaning Printerheads is easy, self-saturating foam-tipped cleaning swab is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.

Self-saturating foam tip · Swab stem filled with 99% isopropyl alcohol (IPA) to disinfect small & difficult to reach electronics.

The cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past. To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip. The user then runs the swab over the print head until it is clean.

1. Products Description

IPA Snap Swabs is an easy, self-saturating foam-tipped cleaning swab.
It is the newest and easiest way to thoroughly clean print heads in PVC card printers and all other thermal printers.
The cleaning solution is contained inside the swab, so bottles and messy rags are a thing of the past.
To dispense the cleaning solution, the user simply squeezes the swab, and the solution saturates the foam tip.
The user then runs the swab over the print head until it is clean.

2. Features

1). Self-saturating foam tip;
2). Reduces residue build-up without dismantling equipment;
3). Quick, easy, inexpensive preventative maintenance.

3. Application

1) Computer Keyboards.
2) Optical and Magnetic Head Devices.
3) Electronic Components.

Evolis Complete Cleaning Kit, Cleaning Cards

Posted on November 29, 2022November 29, 2022 by Adminsoft

Evolis Complete Cleaning Kit, Cleaning Cards

Evolis complete cleaning kit with cleaning cards, swabs, and wipes includes everything you need to clean the inside of your Evolis printer.

The Evolis Complete Cleaning Kit, Cleaning Cards include everything you need to clean the inside of your Evolis printer to keep it working optimally.

Dust and other tiny debris can degrade your printed image quality and even damage your printhead or other critical parts of your printer.

With routine cleanings, you can expect optimal image quality and a longer life for your Evolis card printer.

Evolis leaning kits include pre-saturated cleaning cards, printhead cleaning swabs, and cleaning wipes to keep the cleaning rollers dust free.

As a professional printer clean card manufacturer， We will sell the best product to meet our friend’s demand, and we hope we can become the best partner!

Evolis Primacy card printer cleaning card

Compatible with Evolis A5011 Cleaning Kits. Dust and debris can accumulate inside your printer and can potentially cause damage if left uncleaned.

Compatible Brand: Evolis

Product type: T-shaped long cleaning card, short Adhesive card, Long Adhesive Card

Adhesive PVC cards

Model code: T-shaped long cleaning card (ACL004), short adhesive card (ACL003), long Adhesive card (A5070)

Description: T-shaped long cleaning card (54x326mm), short Adhesive card (54x90mm), long Adhesive card (54x170mm)

Scope of application: cleaning the card passage of the printer.

Evolis Primacy Card Printer Cleaning Pen

The IPA printhead cleaning pen is designed to effectively remove debris, dirt, grime and contaminants remaining in the printhead.

Compatible Brand: Evolis/Ailis

Product Type: Cleaning Pen

Model code: ACL005

Scope of use: cleaning the print head

Evolis Primacy Card Printer Cleaning Stick Swab

Evolis ACL007 Cleaning Swab, is designed to clear away ink residue and dust from the inner workings of your printer easily, extending print performance.

Compatible Brand: Evolis

Product Type: Soaked cleaning Swabs, Squeezed foam Swabs

Model code: soaked cleaning swab ACL007, extruded swab A5003

Scope of use: cleaning the print head, cleaning the dust inside the printer

Evolis Primacy Card Printer Cleaning wipes

Compatible Brand: Evolis

Product Type: Cleaning wipes

Model code: A5024

Scope of use: Wipe the card passage of the printer, clean the inside and outside

What Is The Cleaning Card For?

Posted on November 21, 2022May 5, 2023 by Adminsoft

What Is The Cleaning Card For?

The Cleaning Card is essential to the consistent credit card and the debit card reads on your POS Terminal. A credit card has oils and dirt on its surface. With every swipe into your credit card reader, these contaminants are transferred into the card reader and onto the magnetic heads.

This accumulation of dirt and oils is 80% of the reason why these readers fail.

Every time a credit card transaction has manually entered the fees for that transaction are increased by as much as 2%.

The increase in fees and the time it takes for an employee to enter the number manually are essentially eliminated for a fraction of the cost with regular preventive maintenance.

The use of cleaning cards will prolong the life of the reader.

Widely used in various types of card printers, POSE machine card inlet cleaning, hotel access control system cleaning, IC card refueling machine cleaning, automatic ticket machines, etc.

Used in the cleaning and maintenance of magnetic card charging systems in transportation, banking, securities, industry and commerce, taxation, post and telecommunications, public security, medical care, insurance, energy, electricity, education, health, and various public places.

It is very easy to operate in use, simple to operate, and has a high cleaning effect. It can effectively remove the dust and dirt on the magnetic stripe of the card reader of the above machines and equipment, reduce the frequency of equipment failure and prolong the service life of the machine.

For Credit Card Readers

Designed to thoroughly clean the reading mechanism for credit card readers. A regular preventative maintenance program will eliminate misreads and keep customers happy. Available in both flat and waffle styles.

For Printheads

Designed to remove build-up and contaminants on the thermal printhead within the printer.

Magicard Turbo Cleaning Kit #N9003-564MED. 50 cleaning cards; 3 printhead cleaning pens; For Magicard Turbo printers. All Magicard Printers.

And the static electricity generated by the machine equipment will attract dust to adhere. Those card reader devices will fail to read the card or in case of failure.

Therefore, it is necessary to perform manual maintenance and cleaning from time to time. But simple manual maintenance and cleaning are time-consuming and labor-intensive.

It is also expensive, and the cost performance is very low.

Yousite company has produced a cleaning product, mainly used to clean various card reader equipment. Just insert the cleaning card into the machine equipment, and it can effectively clean the inside of the card reader several times in a row, and clean the card reader. The material is microfiber, which will not cause damage to the inside of the card reader. It is cheap and easy to use. If you have relevant needs, please contact us in time.